Difference between revisions of "AY Honors/Knot/Sheetbend/es"

From Pathfinder Wiki
< AY HonorsAY Honors/Knot/Sheetbend/es
(Created page with "Libro de Respuestas de Especialidades JA/Nudo/Vuelta de Escota")
Line 1: Line 1:
 
<noinclude></noinclude>
 
<noinclude></noinclude>
{{Knot/es
+
{{Knot
| name = Vuelta de Escota (Nudo Tejedor)
+
| name = Sheetbend
 
| image = Schotstek1.png
 
| image = Schotstek1.png
| use = La vuelta de escota (o nudo tejedor) es excelente para unir dos cuerdas juntas, especialmente si las dos cuerdas no son del mismo tamaño. Cuando atado correctamente, no se deshace, y es fácil de desatar. Es muy similar al nudo bolina.
+
| use = The sheet bend knot is excellent for joining two ropes together, especially if the two ropes are not the same size. When tied properly, it will not come undone, and it is easy to untie. It is very similar to the bowline.
 
|tying_instructions =  
 
|tying_instructions =  
# Haga un seno en el extremo de la cuerda más larga (si no son del mismo tamaño).
+
# Make a bight at the end of the larger rope (if they are not the same size).
# Ponga el extremo de la cuerda más corta por el seno, entrando desde la parte inferior.
+
# Run the end of the smaller rope through the bight, entering from the bottom.
# Envuelva el extremo de la cuerda más corta alrededor de la parte posterior de la cuerda más larga, cruzando el extremo corto de la cuerda larga primero.
+
# Wrap the end of small rope around the back of the large rope, crossing the short end of the large rope first.
# Doble el extremo de la cuerda corta debajo de sí mismo, en la parte superior del seno.
+
# Tuck the end of the short rope under itself, on top of the bight.
 
}}
 
}}
 
<noinclude></noinclude>
 
<noinclude></noinclude>

Revision as of 17:59, 10 May 2015

Sheetbend
Schotstek1.png

Uso: The sheet bend knot is excellent for joining two ropes together, especially if the two ropes are not the same size. When tied properly, it will not come undone, and it is easy to untie. It is very similar to the bowline.

Cómo amarrar:

  1. Make a bight at the end of the larger rope (if they are not the same size).
  2. Run the end of the smaller rope through the bight, entering from the bottom.
  3. Wrap the end of small rope around the back of the large rope, crossing the short end of the large rope first.
  4. Tuck the end of the short rope under itself, on top of the bight.