Difference between revisions of "AY Honors/Goat Husbandry/Answer Key"

From Pathfinder Wiki
< AY Honors‎ | Goat HusbandryAY Honors/Goat Husbandry/Answer Key
Line 14: Line 14:
  
 
==2. What type of housing should be provided for goats? ==
 
==2. What type of housing should be provided for goats? ==
 +
Goats are very adaptive animals and do not require fancy or expensive housing. They need protection from the basic elements. When it rains or snows, they will seek shelter. Goats can tolerate cold weather, but should not remain cold and wet for long periods of time. During the summer months, it is important to provide a shady area with adequate air circulation and to control flies.
 +
 +
 +
Natural shade and windbreaks will protect meat goats during much of the year. The primary need for housing is during kidding, especially if kidding occurs during cold weather. A dry, draft free area is needed. Does can kid in large community pens. Some producers use kidding (mothering) pens or jugs to separate does and their litters. Kidding pens should be approximately 4 ft. x 5 ft.; one pen is needed for every 10 does in the herd. In mild weather, it may not be necessary to jug does; does can kid on a clean, well-rested pasture.
 +
 +
 +
Oftentimes, existing buildings can be utilized to house meat goats, store hay and equipment. Producers can make almost any housing system work. Confinement housing, which can be completely enclosed as needed, is popular in cold climates and for human comfort and convenience. Confinement housing allows close supervision of animals, but is more expensive than most other types of housing. Goats in confinement require 20 square feet of space, plus an additional 30 square feet for exercise, if pasture is not available.
 +
 +
 +
Three-sided or open-sided shelters are suitable in most situations. The open side should face away from prevailing winds, the roof should be sloped to repel rain, and there should be adequate drainage around the building. Goats require 10 to 15 square feet of space in open housing. Buck housing can be simple, but must be strong. Taller, sturdier fences are needed to keep bucks away from does in heat.
 +
 +
 +
Movable sheds, polydomes, calf hutches, quonset huts, and straw buildings can be used to shelter small numbers of animals. Hoop or greenhouse structures offer an alternative to traditional livestock housing. In these structures, semi-circular tubular steel provides structural support to a covering of either polyethylene or fabric. The appeal of hoop structures is the lower cost of materials and construction.
 +
 +
 +
Dirt or stone floors are preferred to concrete. Pens should be bedded with 3 to 4 inches of straw or other absorbent material (poor quality hay, wood shavings, sawdust, shredded newspaper, peanut hulls, or sand), 5 to 6 inches if the floor is concrete. In the winter, the manure pack should be allowed to build up, as the decomposing layers provide a source of heat. Buildings with expanded metal floors have been used successfully to feed goats. Less space is generally required per animal.
 +
 +
 +
Building plans for livestock housing are available at most county extension offices.
 +
 +
 +
Manure handling. Goat housing should be designed with manure handling in mind. Removing manure with a front end or skid loader will save labor. Unprotected piles of manure should not be stored in places where runoff may occur. It may be advisable to cover manure piles with tarps. Composting animal waste reduces odors and fly problems. Composted manure is an excellent soil amendment. A manure spreader is desirable for distributing animal wastes over large pastures and crop fields. Keeping animals outside in their natural environment will greatly reduce manure handling requirements.
 +
 +
 +
Ventilation. Ventilation is an important aspect of animal housing, particularly closed housing. Poor ventilation can be detrimental to animal health and performance. Harmful gases and dust can cause respiratory problems, while temperature extremes can reduce animal and human productivity.
 +
 +
 +
The purpose of ventilation is to provide the desired amount of fresh air, without drafts, to all parts of the shelter; to maintain temperatures within desired limits; to maintain relative humidity within desired limits; and to maintain ammonia levels below specified levels.
 +
 +
 +
Ventilation can be natural (cold housing) or mechanical (warm housing). Natural ventilation systems move air through adjustable and fixed openings, such as vents, windows and doors. Mechanical ventilation systems incorporate fans, controls, and air inlets and/or outlets.
 +
 
==3. What types of feed are used for the following: ==
 
==3. What types of feed are used for the following: ==
 
===a. First month ===
 
===a. First month ===

Revision as of 03:07, 22 March 2008

Template:Honor header

1. Identify live or from pictures at least two breeds of goats. Tell if they are raised for milk, meat, or wool.

Adventist Youth Honors Answer Book/Goat Breeds/Saanen

Adventist Youth Honors Answer Book/Goat Breeds/Toggenburg

Adventist Youth Honors Answer Book/Goat Breeds/Nubian

Adventist Youth Honors Answer Book/Goat Breeds/British Alpine

You may also visit http://www.ansi.okstate.edu/breeds/goats/ for pictures and information on different goat breeds.

2. What type of housing should be provided for goats?

Goats are very adaptive animals and do not require fancy or expensive housing. They need protection from the basic elements. When it rains or snows, they will seek shelter. Goats can tolerate cold weather, but should not remain cold and wet for long periods of time. During the summer months, it is important to provide a shady area with adequate air circulation and to control flies.


Natural shade and windbreaks will protect meat goats during much of the year. The primary need for housing is during kidding, especially if kidding occurs during cold weather. A dry, draft free area is needed. Does can kid in large community pens. Some producers use kidding (mothering) pens or jugs to separate does and their litters. Kidding pens should be approximately 4 ft. x 5 ft.; one pen is needed for every 10 does in the herd. In mild weather, it may not be necessary to jug does; does can kid on a clean, well-rested pasture.


Oftentimes, existing buildings can be utilized to house meat goats, store hay and equipment. Producers can make almost any housing system work. Confinement housing, which can be completely enclosed as needed, is popular in cold climates and for human comfort and convenience. Confinement housing allows close supervision of animals, but is more expensive than most other types of housing. Goats in confinement require 20 square feet of space, plus an additional 30 square feet for exercise, if pasture is not available.


Three-sided or open-sided shelters are suitable in most situations. The open side should face away from prevailing winds, the roof should be sloped to repel rain, and there should be adequate drainage around the building. Goats require 10 to 15 square feet of space in open housing. Buck housing can be simple, but must be strong. Taller, sturdier fences are needed to keep bucks away from does in heat.


Movable sheds, polydomes, calf hutches, quonset huts, and straw buildings can be used to shelter small numbers of animals. Hoop or greenhouse structures offer an alternative to traditional livestock housing. In these structures, semi-circular tubular steel provides structural support to a covering of either polyethylene or fabric. The appeal of hoop structures is the lower cost of materials and construction.


Dirt or stone floors are preferred to concrete. Pens should be bedded with 3 to 4 inches of straw or other absorbent material (poor quality hay, wood shavings, sawdust, shredded newspaper, peanut hulls, or sand), 5 to 6 inches if the floor is concrete. In the winter, the manure pack should be allowed to build up, as the decomposing layers provide a source of heat. Buildings with expanded metal floors have been used successfully to feed goats. Less space is generally required per animal.


Building plans for livestock housing are available at most county extension offices.


Manure handling. Goat housing should be designed with manure handling in mind. Removing manure with a front end or skid loader will save labor. Unprotected piles of manure should not be stored in places where runoff may occur. It may be advisable to cover manure piles with tarps. Composting animal waste reduces odors and fly problems. Composted manure is an excellent soil amendment. A manure spreader is desirable for distributing animal wastes over large pastures and crop fields. Keeping animals outside in their natural environment will greatly reduce manure handling requirements.


Ventilation. Ventilation is an important aspect of animal housing, particularly closed housing. Poor ventilation can be detrimental to animal health and performance. Harmful gases and dust can cause respiratory problems, while temperature extremes can reduce animal and human productivity.


The purpose of ventilation is to provide the desired amount of fresh air, without drafts, to all parts of the shelter; to maintain temperatures within desired limits; to maintain relative humidity within desired limits; and to maintain ammonia levels below specified levels.


Ventilation can be natural (cold housing) or mechanical (warm housing). Natural ventilation systems move air through adjustable and fixed openings, such as vents, windows and doors. Mechanical ventilation systems incorporate fans, controls, and air inlets and/or outlets.

3. What types of feed are used for the following:

a. First month

b. Second month

c. Pregnancy

d. Freshened doe

e. Yearling

4. Name three poisonous plants to goats.

5. When are kids weaned?

Kids are weaned at6 to 8 weeks of age.

6. When must the buck kids be removed from the does, and why?

7. How are goat's hoofs trimmed?

8. Why are goats good for clearing brush land?

Goats are reputed to be willing to eat almost anything. The digestive systems of a goat allow nearly any organic substance to be broken down and used as nutrients. Contrary to this reputation, they are quite fastidious in their habits, preferring to browse on the tips of woody shrubs and trees, as well as the occasional broad leaved plant. However, it can fairly be said that goats will eat almost anything in the botanical world. Their plant diet is extremely varied and includes some species which are toxic or detrimental to cattle and sheep. This makes them valuable for controlling weeds and clearing brush and undergrowth.

9. Name at least six items that are made from goat skins.

  1. Gloves
  2. Drumheads
  3. Rugs
  4. Boots
  5. Wineskin (Bible times in particular)
  6. Lampshades
  7. Coats

10. What are wattles?

11. Raise at least two goats for six months.

Have fun!

You can usually find information on goat care on the computer or at your library.

12. If milk goats are raised, answer the following questions:

a. What are the points to consider when choosing a good milk goat?

b. How is pasteurization done and what is its purpose?

13. If milk goats are raised, do the following:

a. Do the milking morning or evening for two goats, or morning and evening for one goat, for at least three months.

b. Keep daily milk production records.

References