Difference between revisions of "AY Honors/Knot/Carrick bend"

From Pathfinder Wiki
m (Move brackets to make translation of content possible)
(Marked this version for translation)
Line 1: Line 1:
<noinclude><translate></noinclude>
+
<noinclude><translate><!--T:5-->
 +
</noinclude>
  
 +
<!--T:6-->
 
{{
 
{{
  
 +
<!--T:7-->
 
Knot
 
Knot
 
| image=Knife-lanyard-knot-ABOK-787-Carrick-start.jpg
 
| image=Knife-lanyard-knot-ABOK-787-Carrick-start.jpg
Line 19: Line 22:
 
| warnings = The Carrick bend is generally tied in a flat interwoven form shown above.  Without additional measures it will capsize (collapse) under load into a secure and stable, although bulky, form.  If the knot is allowed to capsize naturally under tension, considerable slippage of line through the knot can occur before tightening.  The knot should be upset carefully into the capsized form and worked up tight before actual use.
 
| warnings = The Carrick bend is generally tied in a flat interwoven form shown above.  Without additional measures it will capsize (collapse) under load into a secure and stable, although bulky, form.  If the knot is allowed to capsize naturally under tension, considerable slippage of line through the knot can occur before tightening.  The knot should be upset carefully into the capsized form and worked up tight before actual use.
  
 +
<!--T:8-->
 
}}
 
}}
  
 +
<!--T:9-->
 
<noinclude></translate></noinclude>
 
<noinclude></translate></noinclude>

Revision as of 14:22, 9 November 2018


Carrick bend
A fully interwoven diagonally opposed Carrick bend
Carrick-bend-seized-ABOK-1439.jpg

Use: The Carrick bend is used for joining two lines. It is particularly appropriate for very heavy rope or cable that is too large and stiff to easily be formed into other common bends. It will not jam even after carrying a significant load or being soaked with water. The Carrick bend's aesthetically pleasing interwoven and symmetrical shape has also made it popular for decorative purposes.

In the interest of making the Carrick bend easier to untie, especially when tied in extremely large rope, the ends may be seized to prevent the knot from collapsing when load is applied. This practice also keeps the knot's profile flatter and can ease its passage over capstans or winches.

The ends are traditionally seized to their standing part using a Round seizing. For expediency, a series of double constrictor knots, drawn very tight, may also be used. When seizing the Carrick bend, both ends must be secured to their standing parts or the bend will slip.

WARNING: The Carrick bend is generally tied in a flat interwoven form shown above. Without additional measures it will capsize (collapse) under load into a secure and stable, although bulky, form. If the knot is allowed to capsize naturally under tension, considerable slippage of line through the knot can occur before tightening. The knot should be upset carefully into the capsized form and worked up tight before actual use.