AY Honors/Thatching/Answer Key

From Pathfinder Wiki
< AY Honors‎ | ThatchingAY Honors/Thatching/Answer Key /
Revision as of 18:29, 29 January 2015 by W126jep (talk | contribs) (Marked this version for translation)
Other languages:
English • ‎español


Template:Honor desc

1. Make a list of the various tools needed for thatching, stating their uses, and show a "dekspaan" and a "needle" you have made.

Sickle
Thatch comb
Dekspaan
Also called a leggatt, idekspan, grasdekspan or a thatching spade.
Straight needle
Curved needle
Climbing hooks
Shearing hook
Eaves knife
Side rake
Sheep shears
Spar knife

2. State what materials are needed in erecting the framework of a roof ready for thatching. Tell briefly how you go about erecting the framework of a rondavel.

3. Name the various materials required for thatching, including several kinds of thatching "grasses" and thatching "threads". Show samples of these.

4. Answer the following questions on the preparation of thatching material:

a. When is the grass cut and how is it stacked for storing?

Grass is cut after it has gone to seed and most of the seed has been dispersed. This is usually after the first frost (in areas where frost occurs), which also stops active growth of the grass.

Grass should be bundled as soon as it is harvested and stacked off the ground and under cover. It needs to be protected from the elements while it cures.

b. How is the grass "combed" and made ready for thatching?

A sickle is run through the bundles to remove any leaves and to straighten the thatch. This will help it to be tightly packed, which is necessary if it is to be water proof and resist fire.

c. How is thatching rope made? What raw materials are used in your locality?

5. a. Can any shape of roof be thatched?

No. A roof needs to have a pitch of at least 45° or steeper, or it is not suited to thatching. Thatched roofs should be as simple as possible, though complex roofs are frequently thatched. Dormers, multiple ridges, and valleys should be avoided, though they can be accommodated.

5. b. Which is the easiest roof to thatch?

A conical roof is easiest to thatch because the thatcher simply starts at the bottom and goes around until he has circled the entire structure. Then the next layer is added. With a conical roof, there are no tricky corners or transitions to worry about except at the peak which is a single point.

5. c. What are some of the advantages of a thatched roof?

Thatched roofs use native materials which avoids the cost and expense of manufacture and transport. Thatch is also a cheap and usually abundant building material which blends well with the house's surrounding environment.

Thatched roofs are not uncommon among luxury homes (especially in the U.K.) because of the aesthetic charm. A well-thatched roof which is well cared for can be expected have a lifespan exceeding 50 years. By comparison, asphalt shingled roofs have an expected lifespan of only 20 to 30 years.

5. d. What are some of the things that damage thatch? How would you protect a thatched roof against such?

Fire

The greatest disadvantage of thatch is that when it catches on fire, it is extremely difficult to extinguish. Thatch roofs do not catch on fire any more frequently than other types of combustible roofs, but when they do ignite, damage is extensive. Some insurance companies will not insure a building with a thatched roof because of this, and also because skilled thatchers are sometimes very expensive to hire.

Fire can be abated by treating thatch with a fire retardant. A law was passed in London, England in 1212 requiring all existing thatched roofs to be whitewashed with plaster daub.

The construction of the thatched roof also plays a key role in its susceptibility to fire. Thatch should be densely packed, between 35 to 50 kg/m2, and at least 175 mm thick.

Wire should not be used in the construction of a thatched building, as it is a conductor of lightning. Rather, natural materials should be used to bind the thatch, such as sisal twine.

The building should also be equipped with proper lightning protection.

No wiring should enter the building through the thatch (including electrical, telephone, cable TV, etc.). Rather, it should enter either underground through a conduit, or through a non-thatched wall. Antennas should never be mounted on a thatched roof.

The roof should be regularly groomed so that loose straws (which are easily ignited) are removed.

Decay

Thatch is obviously an organic material, and as such, it is susceptible to decay. To protect against this, the thatch should not be harvested until after the first frost has ended its growing season. After it is harvested, it should be stored off the ground and under cover. Leaves should not be allowed to accumulate on the roof of a thatched building, and the roof should be steep - at least 45° - to facilitate the rapid runoff of water. The growth of vegetation on a thatched roof inhibits runoff, so it should be removed quickly if it takes hold.

Vermin

Thatch may be attacked by all manner of vermin, though their numbers are usually held quite low. Any number of poisons can be sprayed on the thatch to eliminate this problem.

6. Have some practical knowledge on how to thatch and demonstrate ability in laying a few short rows of thatch.

7. a. How many workers are needed in thatching a rondavel?

A rondavel is usually thatched by a team of four people.

The first worker passes the bundles of thatch up to the workers on the roof. Before doing this, he will butt the end of the bundle on a flat surface. This blunts the ends of the straws and lines them up.

Two more people work on top of the roof, and a fourth person works from the inside.

7. b. Describe how you would start thatching a rondavel?

7. c. Tell, if possible demonstrate, how you would finish off: (1) a round roof (2) a gabled roof

References