Difference between revisions of "AY Honors/Unicycling/Answer Key"

From Pathfinder Wiki
< AY Honors‎ | UnicyclingAY Honors/Unicycling/Answer Key
m (Jomegat bot moved page AY Honor Unicycling to AY Honor Unicycling Answer Key: Bot: Moved page)
(Bot: Automated import of articles *** existing text overwritten ***)
Line 13: Line 13:
 
{{Honor Master|honor={{#titleparts:{{PAGENAME}}|1|3}}|master=Recreation}}
 
{{Honor Master|honor={{#titleparts:{{PAGENAME}}|1|3}}|master=Recreation}}
  
==1. Know the name and purpose of the various parts of a unicycle.== <!--T:2-->
+
 
 +
<noinclude></translate></noinclude>
 +
<section begin="Body" />
 +
{{ansreq|page={{#titleparts:{{PAGENAME}}|2|1}}|num=1}}
 +
<noinclude><translate></noinclude>
 +
<!-- 1. Know the name and purpose of the various parts of a unicycle. -->
 
[[Image:Torker Unicycle.JPG|thumb|right|220px|A Torker unicycle]]
 
[[Image:Torker Unicycle.JPG|thumb|right|220px|A Torker unicycle]]
 
Unicycles are made up of a few key parts:  
 
Unicycles are made up of a few key parts:  
Line 21: Line 26:
 
The wheel is usually similar to a bicycle wheel with a special hub designed so the axle is a fixed part of the hub. This means the rotation of the cranks directly controls the rotation of the wheel (called direct drive). The frame sits on top of the axle bearings, while the cranks attach to the ends of the axle. The seatpost connects the frame to the saddle.
 
The wheel is usually similar to a bicycle wheel with a special hub designed so the axle is a fixed part of the hub. This means the rotation of the cranks directly controls the rotation of the wheel (called direct drive). The frame sits on top of the axle bearings, while the cranks attach to the ends of the axle. The seatpost connects the frame to the saddle.
  
==2. Define these basic unicycle terms:== <!--T:3-->
+
<noinclude></translate></noinclude>
===a. free mount===
+
{{CloseReq}} <!-- 1 -->
 +
{{ansreq|page={{#titleparts:{{PAGENAME}}|2|1}}|num=2}}
 +
<noinclude><translate></noinclude>
 +
<!-- 2. Define these basic unicycle terms: -->
 +
<noinclude></translate></noinclude>
 +
{{ansreq|page={{#titleparts:{{PAGENAME}}|2|1}}|num=2a}}
 +
<noinclude><translate></noinclude>
 
Mounting the unicycle without having to hold on to anything.
 
Mounting the unicycle without having to hold on to anything.
===b. idle===
+
<noinclude></translate></noinclude>
 +
{{CloseReq}} <!-- 2a -->
 +
{{ansreq|page={{#titleparts:{{PAGENAME}}|2|1}}|num=2b}}
 +
<noinclude><translate></noinclude>
 
Basically sitting on your unicycle with little or no movement, but not dismounted.
 
Basically sitting on your unicycle with little or no movement, but not dismounted.
===c. UPD===
+
<noinclude></translate></noinclude>
 +
{{CloseReq}} <!-- 2b -->
 +
{{ansreq|page={{#titleparts:{{PAGENAME}}|2|1}}|num=2c}}
 +
<noinclude><translate></noinclude>
 
'''U'''n'''P'''lanned '''D'''ismount aka falling off.
 
'''U'''n'''P'''lanned '''D'''ismount aka falling off.
  
==3. Know what safety gear one should use while unicycling and why one should use it.== <!--T:4-->
+
<noinclude></translate></noinclude>
 +
{{CloseReq}} <!-- 2c -->
 +
{{CloseReq}} <!-- 2 -->
 +
{{ansreq|page={{#titleparts:{{PAGENAME}}|2|1}}|num=3}}
 +
<noinclude><translate></noinclude>
 +
<!-- 3. Know what safety gear one should use while unicycling and why one should use it. -->
 
:;Wrist guards: The most common impact points when falling from a unicycle are the  hands and wrists.  Of all the safety gear, wrist guards receive the most wear and tear.  
 
:;Wrist guards: The most common impact points when falling from a unicycle are the  hands and wrists.  Of all the safety gear, wrist guards receive the most wear and tear.  
 
:;Knee and elbow pads: The second most common impact point are the knees followed by the elbows.
 
:;Knee and elbow pads: The second most common impact point are the knees followed by the elbows.
Line 36: Line 58:
 
:;Cycling shorts: Padded cycling shorts are designed with a seamless, padded crotch, and long enough legs to extend down past the saddle, making them much more comfortable than "normal" shorts.
 
:;Cycling shorts: Padded cycling shorts are designed with a seamless, padded crotch, and long enough legs to extend down past the saddle, making them much more comfortable than "normal" shorts.
 
:;Gloves: Gloves are required for certain unicycling events such as racing. Gloves may be fingerless.
 
:;Gloves: Gloves are required for certain unicycling events such as racing. Gloves may be fingerless.
==4. Name 5 different types of unicycles and explain what makes them unique.==
+
<noinclude></translate></noinclude>
 +
{{CloseReq}} <!-- 3 -->
 +
{{ansreq|page={{#titleparts:{{PAGENAME}}|2|1}}|num=4}}
 +
<noinclude><translate></noinclude>
 +
<!-- 4. Name 5 different types of unicycles and explain what makes them unique. -->
 
; Freestyle Unicycle : Generally used for flatland skills and routines. Usually has a relatively high seatpost, a narrow saddle, a squared fork (used for one-footed tricks), and [[W:cotter|cotter]]-less cranks, as they do not need to withstand very much pressure. These unicycles are used similarly to flatland bicycles. Some examples of freestyle unicycles include Miyata, Nimbus, Schwinn, and Semcycle brands. Prices typically range from US$100 to $300. Wheel size is usually 20&nbsp;inches, but smaller riders may use 16-inch unicycles. Some people prefer 24-inch wheels.   
 
; Freestyle Unicycle : Generally used for flatland skills and routines. Usually has a relatively high seatpost, a narrow saddle, a squared fork (used for one-footed tricks), and [[W:cotter|cotter]]-less cranks, as they do not need to withstand very much pressure. These unicycles are used similarly to flatland bicycles. Some examples of freestyle unicycles include Miyata, Nimbus, Schwinn, and Semcycle brands. Prices typically range from US$100 to $300. Wheel size is usually 20&nbsp;inches, but smaller riders may use 16-inch unicycles. Some people prefer 24-inch wheels.   
 
;Trials unicycle: Designed for [[W:unicycle trials|unicycle trials]], trials unicycles are stronger than standard unicycles in order to withstand the stresses caused by jumping, dropping, and supporting the weight of the unicycle and rider on components such as the pedals and cranks. A recent development in trials unicycles is [[W:Rotating spline|splined]] cranks and hubs, a feature that is very useful and somewhat expensive. Many trials unicycles also have wide, 19- or 20-inch knobby tires to absorb some of the impact on drops.
 
;Trials unicycle: Designed for [[W:unicycle trials|unicycle trials]], trials unicycles are stronger than standard unicycles in order to withstand the stresses caused by jumping, dropping, and supporting the weight of the unicycle and rider on components such as the pedals and cranks. A recent development in trials unicycles is [[W:Rotating spline|splined]] cranks and hubs, a feature that is very useful and somewhat expensive. Many trials unicycles also have wide, 19- or 20-inch knobby tires to absorb some of the impact on drops.
Line 45: Line 71:
 
'''Variations here''' -> http://en.wikipedia.org/wiki/Unicycling#Variations, while I think it over.
 
'''Variations here''' -> http://en.wikipedia.org/wiki/Unicycling#Variations, while I think it over.
  
==5. How is unicycling thought to have been invented?== <!--T:6-->
+
<noinclude></translate></noinclude>
 +
{{CloseReq}} <!-- 4 -->
 +
{{ansreq|page={{#titleparts:{{PAGENAME}}|2|1}}|num=5}}
 +
<noinclude><translate></noinclude>
 +
<!-- 5. How is unicycling thought to have been invented? -->
 
[[Image:Ordinary bicycle01.jpg|thumb|right|A ''penny farthing'' or ''ordinary bicycle'']]
 
[[Image:Ordinary bicycle01.jpg|thumb|right|A ''penny farthing'' or ''ordinary bicycle'']]
 
The unicycle's history began before the invention of the bicycle. The Comte De Gaye first developed unicycles during the late 18th century. His device, called a celerifere, was a wooden horse that had two wheels joined by a wooden beam. Germany's Baron von Drais improved the design by adding a steering mechanism, introducing his Draisienne or "Hobby Horse" in 1818. Kirkpatrick Macmillan, a Scottish blacksmith, added cranks and pedals to the rear wheel in 1839, and called it the Velocipede. The first mass-produced riding machine, the Michaux Velocipede, was designed in 1863. In 1866, James Starley developed the penny-farthing, a bicycle with a very large front wheel and a small rear wheel.
 
The unicycle's history began before the invention of the bicycle. The Comte De Gaye first developed unicycles during the late 18th century. His device, called a celerifere, was a wooden horse that had two wheels joined by a wooden beam. Germany's Baron von Drais improved the design by adding a steering mechanism, introducing his Draisienne or "Hobby Horse" in 1818. Kirkpatrick Macmillan, a Scottish blacksmith, added cranks and pedals to the rear wheel in 1839, and called it the Velocipede. The first mass-produced riding machine, the Michaux Velocipede, was designed in 1863. In 1866, James Starley developed the penny-farthing, a bicycle with a very large front wheel and a small rear wheel.
Line 55: Line 85:
 
Over the years, unicycle enthusiasts have inspired manufacturers to create new designs, such as seatless ("ultimate wheel") and tall ("giraffe") unicycles. During the late 1980s some extreme sportsmen took an interest in the unicycle and off-road unicycling (MUni) was born.
 
Over the years, unicycle enthusiasts have inspired manufacturers to create new designs, such as seatless ("ultimate wheel") and tall ("giraffe") unicycles. During the late 1980s some extreme sportsmen took an interest in the unicycle and off-road unicycling (MUni) was born.
  
==6. Repair a punctured unicycle tire== <!--T:9-->
+
<noinclude></translate></noinclude>
 +
{{CloseReq}} <!-- 5 -->
 +
{{ansreq|page={{#titleparts:{{PAGENAME}}|2|1}}|num=6}}
 +
<noinclude><translate></noinclude>
 +
<!-- 6. Repair a punctured unicycle tire -->
 
{{:Adventist Youth Honors Answer Book/Tire repair}}
 
{{:Adventist Youth Honors Answer Book/Tire repair}}
  
==7. Be able to free mount, ride 50 meters/150 feet, turn right and left, and gracefully dismount, all without falling off.== <!--T:10-->
+
<noinclude></translate></noinclude>
 +
{{CloseReq}} <!-- 6 -->
 +
{{ansreq|page={{#titleparts:{{PAGENAME}}|2|1}}|num=7}}
 +
<noinclude><translate></noinclude>
 +
<!-- 7. Be able to free mount, ride 50 meters/150 feet, turn right and left, and gracefully dismount, all without falling off. -->
  
 
<!--T:11-->
 
<!--T:11-->
 
This will take some practice, so get practicing.
 
This will take some practice, so get practicing.
  
 +
<noinclude></translate></noinclude>
 +
{{CloseReq}} <!-- 7 -->
 +
<noinclude><translate></noinclude>
 
==References== <!--T:12-->
 
==References== <!--T:12-->
 
* http://en.wikipedia.org/wiki/Unicycling
 
* http://en.wikipedia.org/wiki/Unicycling
 
<noinclude></translate></noinclude>
 
<noinclude></translate></noinclude>
 +
<section end="Body" />

Revision as of 13:28, 30 December 2020

Other languages:
English • ‎español • ‎français • ‎português do Brasil


Template:Honor desc Template:Honor Master



1

Know the name and purpose of the various parts of a unicycle.


A Torker unicycle

Unicycles are made up of a few key parts:

  • the wheel (which includes the tire, tube, rim, spokes, hub and axle),
  • the cranks, pedals, fork-style frame, seatpost, and
  • saddle (the seat of the unicycle).

The wheel is usually similar to a bicycle wheel with a special hub designed so the axle is a fixed part of the hub. This means the rotation of the cranks directly controls the rotation of the wheel (called direct drive). The frame sits on top of the axle bearings, while the cranks attach to the ends of the axle. The seatpost connects the frame to the saddle.


2

Define these basic unicycle terms:


2a

Free mount


Mounting the unicycle without having to hold on to anything.


2b

Idle


Basically sitting on your unicycle with little or no movement, but not dismounted.


2c

UPD


UnPlanned Dismount aka falling off.



3

Know what safety gear one should use while unicycling and why one should use it.


Wrist guards
The most common impact points when falling from a unicycle are the hands and wrists. Of all the safety gear, wrist guards receive the most wear and tear.
Knee and elbow pads
The second most common impact point are the knees followed by the elbows.
Helmet
A helmet is especially important with specialty riding like Mountain Unicycling, and in some jurisdictions is required for road riding.
Shin guards
Shin guards become a necessary piece of equipment when using metal or pinned pedals. These types of pedals grip the shoes better, but can cause injury to the legs.
Cycling shorts
Padded cycling shorts are designed with a seamless, padded crotch, and long enough legs to extend down past the saddle, making them much more comfortable than "normal" shorts.
Gloves
Gloves are required for certain unicycling events such as racing. Gloves may be fingerless.


4

Name 5 different types of unicycles and explain what makes them unique.


Freestyle Unicycle
Generally used for flatland skills and routines. Usually has a relatively high seatpost, a narrow saddle, a squared fork (used for one-footed tricks), and cotter-less cranks, as they do not need to withstand very much pressure. These unicycles are used similarly to flatland bicycles. Some examples of freestyle unicycles include Miyata, Nimbus, Schwinn, and Semcycle brands. Prices typically range from US$100 to $300. Wheel size is usually 20 inches, but smaller riders may use 16-inch unicycles. Some people prefer 24-inch wheels.
Trials unicycle
Designed for unicycle trials, trials unicycles are stronger than standard unicycles in order to withstand the stresses caused by jumping, dropping, and supporting the weight of the unicycle and rider on components such as the pedals and cranks. A recent development in trials unicycles is splined cranks and hubs, a feature that is very useful and somewhat expensive. Many trials unicycles also have wide, 19- or 20-inch knobby tires to absorb some of the impact on drops.
Offroad Unicycles ("MUnis")
"MUni" is an abbreviation for mountain unicycling. MUnis have many of the same components as trials unicycles, but have a few key differences. Usually, the tire diameters on mountain unicycles are either 24 or 26 inches, allowing the rider to more easily roll over obstacles such as roots and rocks. The seat is also thicker and more comfortable on MUnis to compensate for the rough terrain. Brakes are sometimes used for steep descents.
Touring Unicycles
Used for long distances, these unicycles are specially made to cover distances. They have a large wheel diameter, between 26 and 36 in., so more distance is covered in less pedal rotation. A 36" unicycle made by the Coker Tire company started the big wheel trend. Some variations on the traditional touring unicycle include the Schlumpf "GUni" (geared unicycle), which uses a two-speed internal fixed-geared hub. Larger direct-drive wheels tend to have shorter cranks to allow for easier cadence and more speed. Geared wheels, with an effective diameter larger than the wheel itself, tend to use longer cranks for control, as the speed comes from the gear ratio, not the wheel itself.

Variations here -> http://en.wikipedia.org/wiki/Unicycling#Variations, while I think it over.


5

How is unicycling thought to have been invented?


A penny farthing or ordinary bicycle

The unicycle's history began before the invention of the bicycle. The Comte De Gaye first developed unicycles during the late 18th century. His device, called a celerifere, was a wooden horse that had two wheels joined by a wooden beam. Germany's Baron von Drais improved the design by adding a steering mechanism, introducing his Draisienne or "Hobby Horse" in 1818. Kirkpatrick Macmillan, a Scottish blacksmith, added cranks and pedals to the rear wheel in 1839, and called it the Velocipede. The first mass-produced riding machine, the Michaux Velocipede, was designed in 1863. In 1866, James Starley developed the penny-farthing, a bicycle with a very large front wheel and a small rear wheel.

One theory of the advent of the unicycle is based on the popularity of the penny-farthing (or "Ordinary") during the late 19th century. Since the pedal and cranks were connected directly to the front axle, the rear wheel would go up in the air and the rider would be moved slightly forward. Many penny-farthing owners discovered they could dispense with the frame and just ride the front wheel and handlebars. Evidence for this theory of development can reportedly be found in pictures from the late 19th century showing unicycles with large wheels.

Over the years, unicycle enthusiasts have inspired manufacturers to create new designs, such as seatless ("ultimate wheel") and tall ("giraffe") unicycles. During the late 1980s some extreme sportsmen took an interest in the unicycle and off-road unicycling (MUni) was born.


6

Repair a punctured unicycle tire.

7

Be able to free mount, ride 50 meters/150 feet, turn right and left, and gracefully dismount, all without falling off.


This will take some practice, so get practicing.



References