AY Honors/Upholstery/Answer Key

From Pathfinder Wiki
< AY Honors‎ | UpholsteryAY Honors/Upholstery/Answer Key /

Template:Honor header

1. Know five of the following terms used in upholstery to describe the tools and give their uses:

a. Tack Claw

Tack claw

A tack claw is a tool used for pulling tacks out of furniture. One end has a handle by which the tool is gripped. The other end has a claw which is wedged underneath the head of the tack. The handle is then either lifted or pushed down, levering out the tack.

b. Staple Remover

A staple knocker is a tool resembling a screwdriver, used for removing staples and shredded material. It is called a knocker because a hammer can be used to hit the end of it and remove long lines of shorter staples.

c. Regulator, Mattress Needle

Upholstery Regulator

An upholstery regulator is an upholstery tool which smooths irregularities in the stuffing beneath the coverings.

Whilst it looks similar to a needle it is heavier; like needles the regulator comes in various gauges and lengths. It is used to poke through the various layers to adjust the stuffing before the final cover is put in place.

A related tool is the stuffing iron, which is used to push the stuffing into the curves and corners of a piece of furniture; it has a narrow piece of steel with one toothed edge to grab loose stuffing and place it in the hard to reach spots.

d. Magnetic Hammer

Magnetic Hammer

A magnetic hammer (also called a tack hammer or an upholstery hammer) is a lightweight hammer used for securing upholstery fabric to furniture frames using tacks.

One face of the hammer is magnetized to aid in placement of tacks. Once started, the tacks are driven with the other face. Staple guns have largely replaced tacking as an upholstery technique, except where decorative tacks are used. In the case of decorative tacks, the non-magnetic face of the hammer is often outfitted with a nylon tip so that the tack is not marred as it is driven in place.

e. Sharp Knife or “Snap” blade knife

f. Work Table

g. Industrial Sewing Machine

h. Sundry Items.

2. Explain the use of the following items:

a. Webbing

Webbing is used in couches and chairs as a base for the seating areas that is both strong and flexible. Many types of outdoor furniture use little more than thin light webbing for the seating areas. Webbing is also used to reinforce joints and areas that tend to flex.

b. Staples and Tacks

c. Hessian

d. Buttoning Cord or Waxed Flax

e. Calico

Calico is a textile made from unbleached, and often not fully processed, cotton. It may contain unseparated husk parts, for example. The fabric is less coarse and thick than canvas or denim, but owing to its unfinished and undyed appearance, it is still very cheap.

f. Fibre

g. Flock

Flocking is a type of texture applied to a surface.

"Flocking" is a decoration process that enhances the way a wide variety of products are experienced by making ordinary surfaces seem far more magical and special. "Flocking" is the process of depositing millions of little individual cut fiber particles (called "flock") onto the surface of an article for the purpose of increasing its value in terms of the tactile sensation, aesthetics, color and appearance, and/or a wide variety of other functions--such as insulation, slip-or-grip friction, etc.

h. Foam Sheeting

i. Glues

j. Back Tacking Strip.

3. Name two types of material used for upholstery.

4. Explain how to fit the top cover to a lid.

5. What is the name of the material used for the base of lounges and the base of your box etc., and what is its purpose?

6. Name two methods of attaching covers to chairs.

7. Complete a or b:

a. Ottoman

b. Toybox

8. Complete a Feature Panel.

References

  • Upholstery: A Complete Course : Chairs, Sofas, Ottomans, Screens and Stools By David James, published by Sterling Publishing Company, Inc., 1999; ISBN 1861081189, 9781861081186