AY Honors/Chemistry/Answer Key

From Pathfinder Wiki

Template:Honor header

1. Define the following terms:

a. Elements

A class of substances that cannot be separated into simpler substances by chemical means.

b. Compounds

A uniform substance composed of two or more elements.

c. Chemical symbols

Every element is represented using an abbreviation of one or two characters that represent the name of the element. The first character is always capitalized, and the second character if it exists is always lower case.

H represents hydrogen
He represents helium
Li represents lithium

Some of the symbols do not represent the modern name, but an original name.

Ag represents argentium (Latin) or silver
Au represents aruium (Latin) or gold
W represents wolfrom (German) or tungsten

There are 92 elements that are found naturally on earth, and there are another 26 that have been created in atomic accelerators, and have very short half lives. All of these elements are organized using a "Periodic Table of Elements" which was created by Dimitri Mendeleev.

d. Solutions

A mixture of two or more substances that do not react chemically. If you dissolve sugar, salt, or another substance in water, you are creating a solution.

e. Atoms

Atoms are basic building blocks of matter. Atoms range in size from .5Å to 24Å. ( Å is the symbol for a unit of measure known as an angstrom. A blond hair is between 170,000 and 500,000Å in diameter and a black hair is between 560,000 and 1,810,000Å in diameter)

We cannot directly see atoms with a regular microscope. The positions of the electron cloud around and atom can be determined using X-ray crystallography, or a scanning tunneling microscope. The center of an Atom is "viewed" by using a neutron beam. Light has a wavelength of between 4,000Å and 7,000Å which is about 1000 times the diameter of an atom. Because the wavelength of light is so long it has almost no interaction with the atom.

Hydrogen is the simplest atom, it is made of one proton and one electron. A classical model of an atom is to think about the electron orbiting the central proton. If we created a model of this atom with the proton the size of a basket ball, then the electron would be the size of a grain of salt and will be orbiting at a distance of 40,000 feet.

Atoms are mostly empty space, but because the electrons are moving so rapidly, the matter we touch can feel very solid.

f. Molecules

Two or more atoms that have bonded to each other using the electromagnetic force.

g. Periodic Table

The periodic table of the chemical elements is a tabular method of displaying the chemical elements. The table illustrates recurring ("periodic") trends in the properties of the elements.

Group → 1 2 3     4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
↓ Period
1 1
H

2
He
2 3
Li
4
Be

5
B
6
C
7
N
8
O
9
F
10
Ne
3 11
Na
12
Mg

13
Al
14
Si
15
P
16
S
17
Cl
18
Ar
4 19
K
20
Ca
21
Sc

22
Ti
23
V
24
Cr
25
Mn
26
Fe
27
Co
28
Ni
29
Cu
30
Zn
31
Ga
32
Ge
33
As
34
Se
35
Br
36
Kr
5 37
Rb
38
Sr
39
Y

40
Zr
41
Nb
42
Mo
43
Tc
44
Ru
45
Rh
46
Pd
47
Ag
48
Cd
49
In
50
Sn
51
Sb
52
Te
53
I
54
Xe
6 55
Cs
56
Ba
57
La
58
Ce
*
72
Hf
73
Ta
74
W
75
Re
76
Os
77
Ir
78
Pt
79
Au
80
Hg
81
Tl
82
Pb
83
Bi
84
Po
85
At
86
Rn
7 87
Fr
88
Ra
89
Ac
90
Th
**
104
Rf
105
Db
106
Sg
107
Bh
108
Hs
109
Mt
110
Ds
111
Rg
112
Cn
113
Uut
114
Uuq
115
Uup
116
Uuh
117
Uus
118
Uuo

* Lanthanides 59
Pr
60
Nd
61
Pm
62
Sm
63
Eu
64
Gd
65
Tb
66
Dy
67
Ho
68
Er
69
Tm
70
Yb
71
Lu
** Actinides 91
Pa
92
U
93
Np
94
Pu
95
Am
96
Cm
97
Bk
98
Cf
99
Es
100
Fm
101
Md
102
No
103
Lr
Chemical series of the periodic table
Alkali metals2 Alkaline earth metals2 Lanthanides12 Actinides12 Transition metals2
Poor metals Metalloids Nonmetals Halogens3 Noble gases3

1Actinides and lanthanides are collectively known as "Rare Earth Metals." 2Alkali metals, alkaline Earth metals, transition metals, actinides, and lanthanides are all collectively known as "Metals." 3Halogens and noble gases are also non-metals.

State at standard temperature and pressure

  • those with atomic number in blue are not known at STP
  • those with atomic number in red are gases at standard temperature and pressure (STP)
  • those with atomic number in green are liquids at STP
  • those with atomic number in black are solid at STP

Natural occurrence

  • those with solid borders have isotopes that are older than the Earth (Primordial elements)
  • those with dashed borders naturally arise from decay of other chemical elements and have no isotopes older than the earth
  • those with dotted borders are made artificially (Synthetic elements)

Unknown properties

  • those with a cyan background have unknown chemical properties.


h. Combustion

We often use the word burn to describe the chemical process of a fuel combining rapidly with a oxidizer (usually oxygen). This process usually is associated with flames, light, heat, and smoke.

i. Acid

The word acid is from the Latin word acidus which means sour. In the early days of chemistry, it was a common practice to taste or smell things and record the sensation. Many things that are acidic are sour. Lemon juice is sour because of the citric acid in it.

Because many substances can be toxic, this probably killed a number of chemists including the famous scientist, Humphry Davy, the man who came up with the theory that explained the nature of an acid.

Davy's hypothesis was that acids were substances that contained replaceable hydrogen. This hydrogen could be replaced by metals and this reaction would leave behind a salt.

2HCl + Zn → ZnCl2 + H2
Fe + H2SO4 → H2 + FeSO4

j. Salt

A salt is a term for the solid form of an ionic compound, such as Sodium Chloride (Na+Cl-) or potassium hydroxide (K+(OH)-).

k. Proton

A positively charged particle that is a part of the nucleus of an atom. Protons have a mass of [math]\displaystyle{ 1.67 \times 10^{-27} }[/math] kg. One cubic centimeter of water contains [math]\displaystyle{ 6.02 \times 10^{24} }[/math]protons that form the nucleus of the atoms of hydrogen and oxygen. Hydrogen has one proton at its center and oxygen has 8 protons.

l. Neutron

A neutrally charged particle that is a part of the nucleus of an atom. Neutron's have a mass of [math]\displaystyle{ 1.67 \times 10^{-27} }[/math] kg. When we look at water we find that it is made up of Hydrogen and Oxygen. Hydrogen has no neutrons, but each atom of oxygen has 8 neutrons.

Neutrons are held together by what is called the "Weak Force". Free neutrons decay with a half life of about 10.3 minutes into a proton, electron and an electron nutrino. In the neucleus of an atom, the neutrons can be quite stable because of another force known as the "Strong Force"

m. Electron

A negatively charged particle with a mass of [math]\displaystyle{ 9.11 \times 10^{-31} }[/math] kg. Electrons form a cloud about the positively charged nucleus of an atom.

n. Distillation

Distillation is a technique of separating chemical substances (usually liquids) based on the temperature at which they evaporate. The farther apart the boiling temperatures, the more likely that the distillation will be successful. Success also depends on the interactions between particles, since two dissimilar liquids that are dissolved in each other are likely to form azeotropes. If this occurs, the liquid and gas phase will both have the same composition and therefore boiling will not cause further separation.

o. Fractional Distillation

Fractional distillation is a technique in which several distillations occur in the same column, mediated by some sort of porous medium. It allows the separation of substances with closer boiling points than simple distillation, and also makes the distillation of the same solutions more efficient.

p. Filtration

Filtration is a technique in which a solid precipitate is separated from a liquid. The mixture is placed on filter paper, which allows the liquid to pass through, leaving the solid behind. Typically the liquid is first brought to a temperature such that there is little solid dissolved in the liquid, so that separation is most effective.

2. What gases extinguish life, and how? Explain the principle of one kind of chemical fire extinguisher.

In the extreme, almost any gas can kill a person. Even pure oxygen can kill because the body cannot deal effectively with pure oxygen. The gases can kill by:

1) Suffocation- The gas displaces oxygen and the body now starved of oxygen dies. Some of the most dangerous suffocants are oxidation compounds such as [math]\displaystyle{ CO_2 }[/math] or CO
2) Poison- There are gases such as Cyanide gas HCN which are highly poisonous. Cyanide binds to the iron atoms in the enzyme known as cytochrome c oxidase and thus blocks the production of ATP. ATP is the universal energy currency of all living organisms.
3) Explosion- Many gases are quite flammable and can explode quite destructively. Most of the light Hydrocarbons in mines can be set off with only a small spark.

Fire, like life, requires oxygen, so a common method used in fire extinguishers is to use a gas or liquid that will keep the oxygen from getting to the fuel.

3. Name two common sources of carbon monoxide. Why is it dangerous?

Automobile exhaust before the catalytic converter contains large amounts of CO (Carbon Monoxide). If the exhaust system is damaged before this point, then there is a danger of breathing the suffocating gas. Because CO is odorless, a damaged exhaust system could be fatal.

The catalytic converter converts most of the CO to [math]\displaystyle{ CO_2 }[/math] (Carbon Dioxide) There may still be enough CO in automobile exhaust to be fatal, but since most is now [math]\displaystyle{ CO_2 }[/math] which has an odor or at least sensation, there is less chance of accidental asphyxiation. [math]\displaystyle{ CO_2 }[/math] can be fatal as well, but is quite caustic, creating a burning sensation in the nose and lungs. If you have ever breathed the bubbles from a Soda Pop can, you have smelled [math]\displaystyle{ CO_2 }[/math].

Another common source of CO is natural gas or propane stoves, heaters, hot water heaters, or clothes dryers. If these appliances become damaged they can be quite dangerous. It is a good idea to have a CO detector near an old furnace or water heater to provide an early warning.


4. What are the states of matter?

The states of matter are largely defined based on the level of interaction between the molecules and atoms that form the matter. This interaction is temperature dependent, and there are well defined freezing points, melting points, boiling points, condensation points, and ionization energies for each element or molecule.

Solid
The atoms are in a fairly rigid structure that at the macroscopic level feels hard or solid. The atoms may be arranged in a very rigid crystaline structure, but there is still vibration within the structure.
Liquid
The atoms are free to move around, but do not separate like a gas. Liquids can flow and in general do not feel solid or rigid. Liquids are not compressible. When helium is cooled close to absloute zero, it behaves oddly, turning into a superfluid. It is dangerous to handle because of its temperature.
Gas
The molecules of a gas are completely free to move around and at standard room temperature they move tens of meters before hitting another molecule. A gas is airy. You will not necessarily know that it is there unless you move through it and feel the wind.
Plasma
The molecules of a plasma are ionized, which causes them to repel each other, so a plasma can appear to flow almost like a liquid, and it glows as some of the molecules change ionization states.

In many ways, the modern idea of solid, liquid, gas, and plasma is equivalent to the old alchemy idea of the four elements earth, water, air, and fire.

5. Do five of the following, and explain the chemical action that takes place:

a. Try to light a sugar cube, first without and then with some ash applied to the cube, thus showing the action of a catalyst.

Materials
  • Sugar Cubes
  • Ash from fireplace or campfire
  • Matches or lighter
  • Aluminum foil
  • Piece of wood or trivet to act as insulator
Method
  • Lay a piece of aluminum over the trivet or a piece of wood.
  • Place the sugar cube near the center of the foil.
  • Take another sugar cube and coat it with ash.
  • Place the ash-coated sugar cube next to the first sugar cube, but do not let them touch.
  • Try to light each sugar cube. It should be easier to light the ash-coated sugar cube.

b. Place an ice cube in a glass of water, place a four-inch (10.2 cm) string on top of the glass and ice, then solve the problem of taking the ice cube out of the water without touching it.

Materials
  • Ice
  • Salt
  • Water
  • Glass
  • String 10 cm long
Method
  • Put the ice cube in the glass
  • Tie a loop on the string and place it on the cube
  • Put a pinch of salt on the loop and cube
  • Wait a while then pull up the string

c. With the use of water, turpentine, and soap, transfer a newspaper picture to a blank sheet of paper.

Materials
  • 30 ml soap powder (example: Ivory Snow)
  • 60 ml hot water
  • 15 ml turpentine
  • Small bowl
  • Measuring cup
  • Paint brush
  • Newspaper or old magazine
Method
  • Dissolve soap powder in hot water and then add turpentine.
  • To use, dip a brush into the ink and brush over the picture to be transferred, wait about ten seconds then place a piece of paper over the picture and rub the back of it with a spoon. The picture will be transferred to the paper.
The ink will solidify in its container after a little while. To reverse this simply set the bottle in a pan of warm water until melted and then shake.

d. With the use of a candle and a piece of cardboard, demonstrate visually the three parts of a candle flame.

Kaarsvlam-kl.jpg
1) Blue zone
The blue area is the base of the flame. In this area, pyrolysis takes place (where the candle wax changes state into the combustible gas). Also, part of combustion takes place here. The temperature in this area is about 1200-1400ºC.
2) Dark zone
The dark area in the middle of the flame just above the tip. This dark core of the flame is around 800-1000ºC.
3) Luminous zone
The yellow luminous area is above the dark area. The incandescent soot particles causes the orange and yellow glow. This area is approximately 1200ºC.
4) Flame Mantle
this is on the outer rim of the flame, and is colorless, or a very faint blue, and is the hottest part of the candle flame. About 1400ºC.

To do:
Anyone want to read http://nl.wikipedia.org/wiki/Kaars and translate?


e. With a bowl of water, wooden match sticks, a lump of sugar, and small amount soap, demonstrate the action of sugar and soap on the floating match sticks.

Materials
  • Sugar cube
  • Dish soap
  • 2 Small bowls
  • 12 Toothpicks (or wooden match sticks)
  • Water
Method
  • Fill both bowls water.
  • Drop half the toothpicks into each bowl
  • Place the sugar cube in one bowl. The toothpicks should be drawn to it.
  • Place one drop of dish detergent in the other bowl. The toothpicks should be repelled from it.

Sugar absorbs water, and as it does, it creates a small current that draws the toothpicks toward it. The Soap, on the other hand, breaks the surface tension of the water and immediately spreads out over the surface. As it moves across the surface, it too creates a current, carrying the toothpicks along as it goes.

f. Place a fresh egg in fresh water and then salt water, noting the difference.

Materials
  • Fresh (uncooked) egg
  • 1 liter4 cups Water
  • 120 ml½ cup Salt
  • 2 Bowls
Methods
  • Add the salt and a half liter2 cups of water to a bowl and stir until the salt dissolves.
  • Add the other half liter2 cups of water to the other bowl - do not add any salt.
  • Place the egg in the salted water. It should float
  • Move the egg to the unsalted water. It should sink.

Salt water is more dense than fresh water, meaning that a volume of salt water will weigh more than an equal volume of fresh water. The density of an egg is between the density of salt water and fresh water. An item will float if it is less dense than the liquid in which it is placed. Since the egg is more dense than fresh water, it sinks. But because the egg is less dense than the salt water, it floats.

g. Demonstrate that rust uses up oxygen with the use of steel wool, a pencil, a rubber band, a water glass, and a dish of water.

Materials
  • Steel wool (plain, without soap)
  • Pencil
  • Rubber band
  • Drinking glass (clear glass)
  • Bowl
  • Water
Method
Use the rubber band to attach the steel wool to the eraser end of the pencil. The pencil should be short enough that it can fit inside the glass without sticking out the top. Fill the glass halfway with water, and place the pencil in the glass with the wad of steel wool at the bottom. Place a bowl upside-down over the top of the glass, and carefully turn the glass and the bowl over so that the glass is upside-down and the bowl is right-side-up. Add some water to the bowl and mark the water level on the side of the glass. Place the apparatus some place where it will not be disturbed. After a few days, check the steel wool - it should be rusty.

As the steel wool rusts, it uses up oxygen trapped in the glass. This reduces the volume of air inside the glass, and the atmospheric pressure outside the glass will compensate by pushing down on the water inside the bowl. This will in turn push the water in the glass higher. Verify by comparing the current water level to the level marked at the beginning of the experiment.

h. Demonstrate the colors produced when the following are burned: salt, copper sulfate, and boric acid.

Here's Wikipedia on flame testing

  • Salt : Common table salt is Sodium Chloride Orange-Yellow
  • Copper Sulfate : Blue-Green


More Colors/Flames (because they are colorful)

i. Make an invisible ink.

Materials
  • Water
  • Vinegar, Lemon juice, sugar, onion
  • Small cups
  • Candle or stove flame
  • Tooth picks
  • Paper
Methods
You can mix vinegar, lemon juice, sugar or onion juice with water to create an invisible ink. To make the ink visible, carefully hold it over a heat source. The "ink" will turn colors and become visible. Try mixing a small amount of ink using each type of ingredients to see which works better.

j. Show that washing soda or sodium carbonate contains water.

Materials
  • Test tube/tongs
  • washing soda (baking soda does pretty much exactly the same thing, but the requirements say washing soda)
  • Candle or stove flame
Methods
Put a small amount of the washing soda into the test tube. Hold the test tube with the tongs over a flame. You will see a tornado-like effect inside the test tube as the water makes its "escape". Very fun for everyone to watch!

References