Difference between revisions of "AY Honors/Cycling/Answer Key"

From Pathfinder Wiki
< AY Honors‎ | CyclingAY Honors/Cycling/Answer Key
Line 2: Line 2:
 
{{honor_header|1|1933|Recreation<br>General Conference<br>2001 Edition}}
 
{{honor_header|1|1933|Recreation<br>General Conference<br>2001 Edition}}
 
==1. Know the name and explain the purpose of the various parts of a bicycle.==
 
==1. Know the name and explain the purpose of the various parts of a bicycle.==
Bottom bracket- Attachment of crankset to body of bike
+
'''Bottom bracket-''' Attachment of crankset to body of bike
Brake cable- Cable connecting the brake lever to the brake mechanism
+
'''Brake cable-''' Cable connecting the brake lever to the brake mechanism
Brake lever- Lever on handlebar to activate brake. Left side is front brake, right is rear brake
+
'''Brake lever-''' Lever on handlebar to activate brake. Left side is front brake, right is rear brake
Cassette- There is up to 9 sprockets of increasing size attached to a hub housing making up a modular cassette. This housing is slipped over an outward extending splined part of the hub. The rear hub is a "freewheel" (ratcheted so the wheel is pulled around when pedaling, but allowing the wheel to spin freely while you coast). The chain is shifted from one sprocket to another by moving the right shifter lever to activate the rear derailleur.
+
'''Cassette-''' There is up to 9 sprockets of increasing size attached to a hub housing making up a modular cassette. This housing is slipped over an outward extending splined part of the hub. The rear hub is a "freewheel" (ratcheted so the wheel is pulled around when pedaling, but allowing the wheel to spin freely while you coast). The chain is shifted from one sprocket to another by moving the right shifter lever to activate the rear derailleur.
Chain- Circular set of links to transfer power from chain ring to cogs of freewheel
+
'''Chain-''' Circular set of links to transfer power from chain ring to cogs of freewheel
Chainring- Toothed rings attached to crank that hold chain
+
'''Chainring-''' Toothed rings attached to crank that hold chain
 
Chainstay- Lower bar on portion of frame that attaches rear wheel. If there's no second tube on dual suspension bike, it is referred to as a swing arm.
 
Chainstay- Lower bar on portion of frame that attaches rear wheel. If there's no second tube on dual suspension bike, it is referred to as a swing arm.
Crank- Lever extending from bottom bracket to pedal, transfers power to chain rings
+
'''Crank'''- Lever extending from bottom bracket to pedal, transfers power to chain rings
Derailleur- Mechanism for moving chain from one cog to another
+
'''Derailleur-''' Mechanism for moving chain from one cog to another
Down tube- Section of frame extending downward from stem to bottom bracket
+
'''Down tube-''' Section of frame extending downward from stem to bottom bracket
Dropout- Cut slot at bottom of front fork or chain stay, designed to accept axle of wheel
+
'''Dropout-''' Cut slot at bottom of front fork or chain stay, designed to accept axle of wheel
Freewheel- Set of rear cogs and idling mechanism
+
'''Freewheel-''' Set of rear cogs and idling mechanism
Front brake- Brake on front fork of bike
+
'''Front brake-''' Brake on front fork of bike
Front fork-
+
'''Front shock-''' Shock absorber on front fork
Front shock- Shock absorber on front fork
+
'''Handlebar-''' Horizontal bar attached to the stem with handgrips at the end, to which attach brake levers and shifters
Handlebar- Horizontal bar attached to the stem with handgrips at the end, to which attach brake levers and shifters
+
'''Headset-''' Mechanism in front of frame that connects front fork to stem and handlebars
Headset- Mechanism in front of frame that connects front fork to stem and handlebars
+
'''Head tube (steering tube) -''' Section of frame extending downward from top tube to down tube
Head tube (steering tube) - Section of frame extending downward from top tube to down tube
+
'''Hub-''' Center portion of the wheel, to which the spokes attach
Hub- Center portion of the wheel, to which the spokes attach
+
'''Idler pulley-''' Bottom pulley of the rear derailleur, with spring tension to keep chain tight
Idler pulley- Bottom pulley of the rear derailleur, with spring tension to keep chain tight
+
'''Nipple-''' Threaded receptacle that holds the end of the spoke into the rim
Nipple- Threaded receptacle that holds the end of the spoke into the rim
+
'''Pedal-''' Platform for the foot to press on, attached to crank
Pedal- Platform for the foot to press on, attached to crank
+
'''Rear brake-''' Brake on the rear wheel, usually attached to seat stay
Rear brake- Brake on the rear wheel, usually attached to seat stay
 
 
Rear shock- Shock absorber for rear tire on dual-suspension bikes
 
Rear shock- Shock absorber for rear tire on dual-suspension bikes
Rim- Metal ring with U-shaped cross section, holds spokes on the inside and tire on the outside
+
'''Rim-''' Metal ring with U-shaped cross section, holds spokes on the inside and tire on the outside
Saddle (Seat) - The part your butt shouldn't be sitting on when going steep downhill
+
'''Saddle (Seat) -''' The part your butt shouldn't be sitting on when going steep downhill
Seat post- Support post for saddle, fits into seat tube with mechanism for changing height
+
'''Seat post-''' Support post for saddle, fits into seat tube with mechanism for changing height
Seat stay- Upper support arm for the rear wheel, not present on dual-suspension bikes with simple swingarm
+
'''Seat stay-''' Upper support arm for the rear wheel, not present on dual-suspension bikes with simple swingarm
Seat tube- Section of frame extending downward from top tube to bottom bracket
+
'''Seat tube-''' Section of frame extending downward from top tube to bottom bracket
Shifter, front- Shifting mechanism for the front derailleur, mounted on the left side of the handlebar
+
'''Shifter, front-''' Shifting mechanism for the front derailleur, mounted on the left side of the handlebar
Shifter, rear- Shifting mechanism for the rear derailleur, mounted on the right side of the handlebar
+
'''Shifter, rear-''' Shifting mechanism for the rear derailleur, mounted on the right side of the handlebar
Skewer- Metal rod that goes through the hub, attaching the wheel to the dropouts of the frame
+
'''Skewer-''' Metal rod that goes through the hub, attaching the wheel to the dropouts of the frame
Spindle- Freely rotating "axle" to which the crank arms attach, part of the bottom bracket
+
'''Spindle-''' Freely rotating "axle" to which the crank arms attach, part of the bottom bracket
Spokes- Thick wires joining the hub to the rim, with tension adjusted via a nipple on the rim side
+
'''Spokes-''' Thick wires joining the hub to the rim, with tension adjusted via a nipple on the rim side
Stem- Piece that attaches the handlebar to the steering tube (headset)
+
'''Stem-''' Piece that attaches the handlebar to the steering tube (headset)
Swingarm- Lower bar on portion of frame that attaches rear wheel with some form of spring, on full suspension bikes
+
'''Swingarm-''' Lower bar on portion of frame that attaches rear wheel with some form of spring, on full suspension bikes
Tyre- Where the rubber meets the road
+
'''Tyre-''' Where the rubber meets the road
Top tube- Top bar of the bicycle frame
+
'''Top tube-''' Top bar of the bicycle frame
Valve stem- Stem poking out of rim to inflate tyre
+
'''Valve stem-''' Stem poking out of rim to inflate tyre
Wheel hub- Center of the wheel, to which the spokes attach
+
'''Wheel hub-''' Center of the wheel, to which the spokes attach
  
 
==2. Repair a punctured bicycle tire.==
 
==2. Repair a punctured bicycle tire.==

Revision as of 23:18, 14 July 2006

Cycling

Template:Honor header

1. Know the name and explain the purpose of the various parts of a bicycle.

Bottom bracket- Attachment of crankset to body of bike Brake cable- Cable connecting the brake lever to the brake mechanism Brake lever- Lever on handlebar to activate brake. Left side is front brake, right is rear brake Cassette- There is up to 9 sprockets of increasing size attached to a hub housing making up a modular cassette. This housing is slipped over an outward extending splined part of the hub. The rear hub is a "freewheel" (ratcheted so the wheel is pulled around when pedaling, but allowing the wheel to spin freely while you coast). The chain is shifted from one sprocket to another by moving the right shifter lever to activate the rear derailleur. Chain- Circular set of links to transfer power from chain ring to cogs of freewheel Chainring- Toothed rings attached to crank that hold chain Chainstay- Lower bar on portion of frame that attaches rear wheel. If there's no second tube on dual suspension bike, it is referred to as a swing arm. Crank- Lever extending from bottom bracket to pedal, transfers power to chain rings Derailleur- Mechanism for moving chain from one cog to another Down tube- Section of frame extending downward from stem to bottom bracket Dropout- Cut slot at bottom of front fork or chain stay, designed to accept axle of wheel Freewheel- Set of rear cogs and idling mechanism Front brake- Brake on front fork of bike Front shock- Shock absorber on front fork Handlebar- Horizontal bar attached to the stem with handgrips at the end, to which attach brake levers and shifters Headset- Mechanism in front of frame that connects front fork to stem and handlebars Head tube (steering tube) - Section of frame extending downward from top tube to down tube Hub- Center portion of the wheel, to which the spokes attach Idler pulley- Bottom pulley of the rear derailleur, with spring tension to keep chain tight Nipple- Threaded receptacle that holds the end of the spoke into the rim Pedal- Platform for the foot to press on, attached to crank Rear brake- Brake on the rear wheel, usually attached to seat stay Rear shock- Shock absorber for rear tire on dual-suspension bikes Rim- Metal ring with U-shaped cross section, holds spokes on the inside and tire on the outside Saddle (Seat) - The part your butt shouldn't be sitting on when going steep downhill Seat post- Support post for saddle, fits into seat tube with mechanism for changing height Seat stay- Upper support arm for the rear wheel, not present on dual-suspension bikes with simple swingarm Seat tube- Section of frame extending downward from top tube to bottom bracket Shifter, front- Shifting mechanism for the front derailleur, mounted on the left side of the handlebar Shifter, rear- Shifting mechanism for the rear derailleur, mounted on the right side of the handlebar Skewer- Metal rod that goes through the hub, attaching the wheel to the dropouts of the frame Spindle- Freely rotating "axle" to which the crank arms attach, part of the bottom bracket Spokes- Thick wires joining the hub to the rim, with tension adjusted via a nipple on the rim side Stem- Piece that attaches the handlebar to the steering tube (headset) Swingarm- Lower bar on portion of frame that attaches rear wheel with some form of spring, on full suspension bikes Tyre- Where the rubber meets the road Top tube- Top bar of the bicycle frame Valve stem- Stem poking out of rim to inflate tyre Wheel hub- Center of the wheel, to which the spokes attach

2. Repair a punctured bicycle tire.

3. Take apart, clean, and properly reassemble a bicycle.

4. Adjust the brakes and front and rear derailer properly.

5. Know and practice courtesy and safety rules in bicycling.

6. What is the advantage of wearing a cycling helmet?

7. Have the following riding record:

  • a. Take three separate 10-mile (16.1 km) rides in different locations.
  • b. Take a 50-mile (80.6 km) ride in ten hours or less.

8. Know how to read a road map by routing out your 50-mile (80.6 km) course and following it accurately on an actual ride.

References