Difference between revisions of "AY Honors/Blacksmithing/Answer Key"

From Pathfinder Wiki
< AY Honors‎ | BlacksmithingAY Honors/Blacksmithing/Answer Key
m
 
(14 intermediate revisions by 3 users not shown)
Line 1: Line 1:
<languages /><br />
+
{{HonorSubpage}}
<noinclude><translate><!--T:1-->
+
<section begin="Body" />  
 +
{{ansreq|page={{#titleparts:{{PAGENAME}}|2|1}}|num=1}}
 +
<noinclude><translate><!--T:50-->
 
</noinclude>
 
</noinclude>
 
+
<!-- 1. Define blacksmith and blacksmithing. -->
<!--T:2-->
 
{{Honor desc
 
|honorname=Blacksmithing
 
|category=Vocational
 
|authority= North American Division
 
|skill=2
 
|year=2015
 
|stage=75
 
|insignia=Blacksmithing_Honor.png
 
}}
 
 
 
<!--T:3-->
 
<big>'''Instructor Required'''</big>
 
 
 
==1. Define blacksmith and blacksmithing.== <!--T:4-->
 
 
;Blacksmith: A person who makes or repairs things made of iron, iron alloys or other malleable metal, by hand. While many times they are the same person, for the purpose of this honor the blacksmith makes the shoes, a farrier shoes the horse.
 
;Blacksmith: A person who makes or repairs things made of iron, iron alloys or other malleable metal, by hand. While many times they are the same person, for the purpose of this honor the blacksmith makes the shoes, a farrier shoes the horse.
 
;Blacksmithing: The art of working iron with a forge, anvil, hammer, and other tools.
 
;Blacksmithing: The art of working iron with a forge, anvil, hammer, and other tools.
  
==2. While both forging and fabrication can be a part of blacksmithing, your projects may or may not include fabrication. Discuss with your instructor the basic differences between forging and fabrication and be able to explain the differences.== <!--T:27-->
+
<!--T:51-->
 +
<noinclude></translate></noinclude>
 +
{{CloseReq}} <!-- 1 -->
 +
{{ansreq|page={{#titleparts:{{PAGENAME}}|2|1}}|num=2}}
 +
<noinclude><translate><!--T:52-->
 +
</noinclude>
 +
<!-- 2. While both forging and fabrication can be a part of blacksmithing, your projects may or may not include fabrication. Discuss with your instructor the basic differences between forging and fabrication and be able to explain the differences. -->
 
;Forging: The process of hammering the metal into a desired shape while the metal is hot and in a plastic state. Usually the finished item bears no resemblance to the original piece of metal.
 
;Forging: The process of hammering the metal into a desired shape while the metal is hot and in a plastic state. Usually the finished item bears no resemblance to the original piece of metal.
 
;Fabrication: Involves cutting pieces of dimensional stock and assembling the pieces into the desired item, usually by welding.
 
;Fabrication: Involves cutting pieces of dimensional stock and assembling the pieces into the desired item, usually by welding.
  
==3. Discuss with your instructor the safety rules for blacksmithing. Be sure you understand why they are important, and explain or demonstrate them when asked.== <!--T:5-->
+
<!--T:53-->
 +
<noinclude></translate></noinclude>
 +
{{CloseReq}} <!-- 2 -->
 +
{{ansreq|page={{#titleparts:{{PAGENAME}}|2|1}}|num=3}}
 +
<noinclude><translate><!--T:54-->
 +
</noinclude>
 +
<!-- 3. Discuss with your instructor the safety rules for blacksmithing. Be sure you understand why they are important, and explain or demonstrate them when asked. -->
  
 
<!--T:28-->
 
<!--T:28-->
*Wear natural fiber clothing, such as cotton, wool and/or leather.
+
*Wear natural fiber clothing, such as cotton, wool and/or leather.
 
**When synthetics such as Nylon, Rayon, etc. catch fire, they can melt to the skin causing a severe burn.
 
**When synthetics such as Nylon, Rayon, etc. catch fire, they can melt to the skin causing a severe burn.
  
 
<!--T:29-->
 
<!--T:29-->
 
*Wear safety goggles or safety glasses at all times.  
 
*Wear safety goggles or safety glasses at all times.  
**Steel forms an oxidized layer when heated to at least a red heat. This layer is called scale and is loosely attached. This scale is very hot and flies off when you hit it.
+
**Steel forms an oxidized layer when heated to at least a red heat. This layer is called scale and is loosely attached. This scale is very hot and flies off when you hit it.
  
 
<!--T:30-->
 
<!--T:30-->
Line 58: Line 57:
  
 
<!--T:35-->
 
<!--T:35-->
*DO NOT heat galvanized metal as the fumes are DEADLY. It causes zinc poisoning. Never put anything galvanized in the fire, be particularly careful when using reclaimed metal. Several experienced smiths have died from zinc poisoning.
+
*DO NOT heat galvanized metal as the fumes are DEADLY. It causes zinc poisoning. Never put anything galvanized in the fire, be particularly careful when using reclaimed metal. Several experienced smiths have died from zinc poisoning.
**Make sure you have adequate ventilation. Carbon Monoxide (CO) is deadly, and the smoke can cause an asthmatic reaction.
+
**Make sure you have adequate ventilation. Carbon Monoxide (CO) is deadly, and the smoke can cause an asthmatic reaction.
  
==4. As you discuss with your instructor the process of treating metal, develop a basic understanding of the principles of hardening and tempering metal.== <!--T:6-->
+
<!--T:55-->
 +
<noinclude></translate></noinclude>
 +
{{CloseReq}} <!-- 3 -->
 +
{{ansreq|page={{#titleparts:{{PAGENAME}}|2|1}}|num=4}}
 +
<noinclude><translate><!--T:56-->
 +
</noinclude>
 +
<!-- 4. As you discuss with your instructor the process of treating metal, develop a basic understanding of the principles of hardening and tempering metal. -->
  
 
<!--T:36-->
 
<!--T:36-->
When metal is hot and in a plastic state, the atoms are excited and moving. To harden the metal you need to quench it (cool it rapidly) and freeze the atoms in a crystalline structure. However this rapid cooling makes the steel very brittle, as the crystalline structure is very random.
+
When metal is hot and in a plastic state, the atoms are excited and moving. To harden the metal you need to quench it (cool it rapidly) and freeze the atoms in a crystalline structure. However this rapid cooling makes the steel very brittle, as the crystalline structure is very random.
  
 
<!--T:37-->
 
<!--T:37-->
Therefore you temper the metal. Tempering is the process of re heating the metal to a critical point lower than the temperature it was before it was hardened and allowing it to cool more slowly. This process allows the atoms to align themselves in a more uniform structure, making the metal “flexible” and less likely to shatter.
+
Therefore you temper the metal. Tempering is the process of re heating the metal to a critical point lower than the temperature it was before it was hardened and allowing it to cool more slowly. This process allows the atoms to align themselves in a more uniform structure, making the metal “flexible” and less likely to shatter.
  
 
<!--T:38-->
 
<!--T:38-->
For steel to harden properly, you must use a high carbon steel. If you harden a low carbon steel it will revert back to its un-hardened state as the atoms are always moving and do not have the crystalline carbon structure to keep them in place.
+
For steel to harden properly, you must use a high carbon steel. If you harden a low carbon steel it will revert back to its un-hardened state as the atoms are always moving and do not have the crystalline carbon structure to keep them in place.
 
In the advanced honor you will be asked to make a chisel, then harden and temper it.
 
In the advanced honor you will be asked to make a chisel, then harden and temper it.
  
==5. Identify and explain the nine basic items required for blacksmithing.== <!--T:7-->
+
<!--T:57-->
;a) Forge: A place to build a contained fire which will reach over 2,000° Fahrenheit.
+
<noinclude></translate></noinclude>
;b) Fuel: A material capable of producing temperatures greater than 2,000° Fahrenheit.
+
{{CloseReq}} <!-- 4 -->
<blockquote>COAL – The best coal for blacksmithing is usually bituminous (pronounced bi·tu·mi·nous) or soft coal, as it tends to have less sulfur, and starts easier.  Therefore soft coal is generally preferred by beginning smiths.
+
{{ansreq|page={{#titleparts:{{PAGENAME}}|2|1}}|num=5}}
 +
<noinclude><translate><!--T:58-->
 +
</noinclude>
 +
<!-- 5. Identify and explain the nine basic items required for blacksmithing. -->
 +
 
 +
<!--T:145-->
 +
<noinclude></translate></noinclude>
  
<!--T:39-->
+
{{ansreq|page={{#titleparts:{{PAGENAME}}|2|1}}|num=5a}}
Lignite (pronounced lig·nite), sub-bituminous, and anthracite (pronounced an·thra·cite), or hard coal tend to have too much sulfur and other impurities frequently making them less suitable for forging.  However since anthracite is still used as a heat source in some parts of the United States it tends to be easier to find and less expensive than soft coal thus many experienced smiths have switched to it.
+
<noinclude><translate><!--T:146-->
 +
</noinclude>
 +
A place to build a contained fire which will reach over 2,000° Fahrenheit.
 +
<noinclude></translate></noinclude>
 +
{{CloseReq}} <!-- 5a -->
  
<!--T:40-->
+
{{ansreq|page={{#titleparts:{{PAGENAME}}|2|1}}|num=5b}}
Coal is a natural product and has different characteristics depending on how it was formed. The vein or mine it comes from will also determine the quality of the coal, and the impurities it contains.
+
<noinclude><translate><!--T:147-->
 +
</noinclude>
 +
A material capable of producing temperatures greater than 2,000° Fahrenheit.
 +
<blockquote>COAL – The best coal for blacksmithing is usually bituminous (pronounced bi·tu·mi·nous) or soft coal, as it tends to have less sulfur, and starts easier. Therefore soft coal is generally preferred by beginning smiths.
 +
Lignite (pronounced lig·nite), sub-bituminous, and anthracite (pronounced an·thra·cite), or hard coal tend to have too much sulfur and other impurities frequently making them less suitable for forging. However since anthracite is still used as a heat source in some parts of the United States it tends to be easier to find and less expensive than soft coal thus many experienced smiths have switched to it.
 +
Coal is a natural product and has different characteristics depending on how it was formed. The vein or mine it comes from will also determine the quality of the coal, and the impurities it contains.
 
</blockquote>
 
</blockquote>
 
<blockquote>
 
<blockquote>
COKE – Coke is formed when coal is heated and the impurities are driven out. Coke is almost pure carbon.
+
COKE – Coke is formed when coal is heated and the impurities are driven out. Coke is almost pure carbon.
 
</blockquote>
 
</blockquote>
 
<blockquote>
 
<blockquote>
Line 93: Line 113:
 
Other Less Common Fuels such as Wood, Charcoal, Corn husks, Etc.
 
Other Less Common Fuels such as Wood, Charcoal, Corn husks, Etc.
 
</blockquote>
 
</blockquote>
 +
<noinclude></translate></noinclude>
 +
{{CloseReq}} <!-- 5b -->
 +
 +
{{ansreq|page={{#titleparts:{{PAGENAME}}|2|1}}|num=5c}}
 +
<noinclude><translate><!--T:148-->
 +
</noinclude>
 +
To introduce large quantities of air to the fire. Not required for some natural gas or propane forges.
 +
<noinclude></translate></noinclude>
 +
{{CloseReq}} <!-- 5c -->
 +
 +
{{ansreq|page={{#titleparts:{{PAGENAME}}|2|1}}|num=5d}}
 +
<noinclude><translate><!--T:149-->
 +
</noinclude>
 +
Is either traditional / commercially made or made from available materials such as a railroad track. In accordance with Newton’s third law of motion. “For every action, there is an equal and opposite reaction.” The anvil works the other side of the metal you are pounding on.
 +
<noinclude></translate></noinclude>
 +
{{CloseReq}} <!-- 5d -->
 +
 +
{{ansreq|page={{#titleparts:{{PAGENAME}}|2|1}}|num=5e}}
 +
<noinclude><translate><!--T:150-->
 +
</noinclude>
 +
Or other suitable object that can be used to pound on the metal.
 +
<noinclude></translate></noinclude>
 +
{{CloseReq}} <!-- 5e -->
  
<!--T:8-->
+
{{ansreq|page={{#titleparts:{{PAGENAME}}|2|1}}|num=5f}}
;c) Blower (or Bellows) and Ducting: to introduce large quantities of air to the fire. Not required for some natural gas or propane forges.
+
<noinclude><translate><!--T:151-->
;d) Anvil: is either traditional / commercially made or made from available materials such as a railroad track.  In accordance with Newton’s third law of motion. “For every action, there is an equal and opposite reaction.”  The anvil works the other side of the metal you are pounding on.
+
</noinclude>
 +
That are long enough and strong enough to retrieve and hold hot metal as it is moved to and from the fire.
 +
<noinclude></translate></noinclude>
 +
{{CloseReq}} <!-- 5f -->
 +
 
 +
{{ansreq|page={{#titleparts:{{PAGENAME}}|2|1}}|num=5g}}
 +
<noinclude><translate><!--T:152-->
 +
</noinclude>
 +
Has a long leg that transfers some of the force to the ground. It is used to hold and clamp a piece of metal while it is twisted, hammered or otherwise worked. Also known as a blacksmith vise, stump vise, pole vise or post vise.
 +
<noinclude></translate></noinclude>
 +
{{CloseReq}} <!-- 5g -->
 +
 
 +
{{ansreq|page={{#titleparts:{{PAGENAME}}|2|1}}|num=5h}}
 +
<noinclude><translate><!--T:153-->
 +
</noinclude>
 +
Used to protect your eyes from flying scale, sparks, etc.
 +
<noinclude></translate></noinclude>
 +
{{CloseReq}} <!-- 5h -->
  
<!--T:41-->
+
{{ansreq|page={{#titleparts:{{PAGENAME}}|2|1}}|num=5i}}
;e) Hammer: or other suitable object that can be used to pound on the metal.
+
<noinclude><translate><!--T:154-->
;f) Tongs: that are long enough and strong enough to retrieve and hold hot metal as it is moved to and from the fire.
+
</noinclude>
;g) Vise: has a long leg that transfers some of the force to the ground.  It is used to hold and clamp a piece of metal while it is twisted, hammered or otherwise worked. Also known as a blacksmith vise, stump vise, pole vise or post vise
+
Or ear muffs to protect your hearing.
;h) Safety Glasses: used to protect your eyes from flying scale, sparks, etc.
+
<noinclude></translate></noinclude>
;i) Ear Plugs: or ear muffs to protect your hearing.
+
{{CloseReq}} <!-- 5i -->
  
==6. Identify the parts of a London pattern anvil and identify their uses.== <!--T:9-->
+
{{CloseReq}} <!-- 5 -->
 +
{{ansreq|page={{#titleparts:{{PAGENAME}}|2|1}}|num=6}}
 +
<noinclude><translate><!--T:60-->
 +
</noinclude>
 +
<!-- 6. Identify the parts of a London pattern anvil and identify their uses. -->
 
[[File:Anvil, labelled en.svg|thumb|300px|London pattern anvil]]
 
[[File:Anvil, labelled en.svg|thumb|300px|London pattern anvil]]
Anvils come in many shapes and sizes. The shape that is most common today is the “London Pattern” which became common in the 1800s.  While the size of the different parts vary from anvil to anvil, most anvils have the following standard features: A body, a face, a horn, a step, a Hardie (or Hardy) hole, and a Pritchel hole.
+
Anvils come in many shapes and sizes. The shape that is most common today is the “London Pattern” which became common in the 1800s. While the size of the different parts vary from anvil to anvil, most anvils have the following standard features: A body, a face, a horn, a step, a Hardie (or Hardy) hole, and a Pritchel hole.
  
===a) The body (and base):=== <!--T:42-->
+
<!--T:61-->
 +
<noinclude></translate></noinclude>
 +
{{ansreq|page={{#titleparts:{{PAGENAME}}|2|1}}|num=6a}} <!--T:42-->
 +
<noinclude><translate><!--T:62-->
 +
</noinclude>
 
The body (and base) help form the mass of the anvil and most work is performed over these areas.
 
The body (and base) help form the mass of the anvil and most work is performed over these areas.
  
===b) The horn=== <!--T:43-->
+
<!--T:63-->
The horn or “front” end of the anvil is curved.  This allows the smith to hammer different curves into the piece they are working on. The resulting curve depends on how the piece is held, as well as which part of the horn is used while the smith hammers on it.   The horn can also be known as a Bick, a Beak or a Pike.
+
<noinclude></translate></noinclude>
 +
{{CloseReq}} <!-- 6a -->
 +
{{ansreq|page={{#titleparts:{{PAGENAME}}|2|1}}|num=6b}} <!--T:43-->
 +
<noinclude><translate><!--T:64-->
 +
</noinclude>
 +
The horn or “front” end of the anvil is curved. This allows the smith to hammer different curves into the piece they are working on. The resulting curve depends on how the piece is held, as well as which part of the horn is used while the smith hammers on it. The horn can also be known as a Bick, a Beak or a Pike.
  
===c) Table or step=== <!--T:44-->
+
<!--T:65-->
 +
<noinclude></translate></noinclude>
 +
{{CloseReq}} <!-- 6b -->
 +
{{ansreq|page={{#titleparts:{{PAGENAME}}|2|1}}|num=6c}} <!--T:44-->
 +
<noinclude><translate><!--T:66-->
 +
</noinclude>
 
The table or step is a flat area above the horn, lower than the face. This area is often used as a cutting area, to prevent damage to the face.  
 
The table or step is a flat area above the horn, lower than the face. This area is often used as a cutting area, to prevent damage to the face.  
  
===d) The face=== <!--T:45-->
+
<!--T:67-->
The face is the main large rectangular flat area where most of the work takes place.  It also contains the Hardie hole and the Pritchel hole. 
+
<noinclude></translate></noinclude>
 +
{{CloseReq}} <!-- 6c -->
 +
{{ansreq|page={{#titleparts:{{PAGENAME}}|2|1}}|num=6d}} <!--T:45-->
 +
<noinclude><translate><!--T:68-->
 +
</noinclude>
 +
The face is the main large rectangular flat area where most of the work takes place. It also contains the Hardie hole and the Pritchel hole.  
  
===e) The Hardie or Hardy hole.=== <!--T:46-->
+
<!--T:69-->
The Hardie, or Hardy, hole is a square hole through the anvil that allows you to secure various tools called hardies.  These hardies can include hot or cold cut chisels, various Swages (used for shaping or marking the metal, in general a block of metal with a recess for forcing the metal into the shape of the recess), Bickerns (smaller, specialized versions of the horn), lower fullers, etc. 
+
<noinclude></translate></noinclude>
 +
{{CloseReq}} <!-- 6d -->
 +
{{ansreq|page={{#titleparts:{{PAGENAME}}|2|1}}|num=6e}} <!--T:46-->
 +
<noinclude><translate><!--T:70-->
 +
</noinclude>
 +
The Hardie, or Hardy, hole is a square hole through the anvil that allows you to secure various tools called hardies. These hardies can include hot or cold cut chisels, various Swages (used for shaping or marking the metal, in general a block of metal with a recess for forcing the metal into the shape of the recess), Bickerns (smaller, specialized versions of the horn), lower fullers, etc.  
  
===f) The Pritchel hole.=== <!--T:47-->
+
<!--T:71-->
 +
<noinclude></translate></noinclude>
 +
{{CloseReq}} <!-- 6e -->
 +
{{ansreq|page={{#titleparts:{{PAGENAME}}|2|1}}|num=6f}} <!--T:47-->
 +
<noinclude><translate><!--T:72-->
 +
</noinclude>
 
The Pritchel hole is a round hole meant as an aid in drifting (punching) holes through the metal you’re working on.
 
The Pritchel hole is a round hole meant as an aid in drifting (punching) holes through the metal you’re working on.
  
Line 130: Line 223:
 
{{clear}}
 
{{clear}}
  
==7. Explain the two basic classes of forges, (solid fuel and gas), and demonstrate ability to identify the parts of the one you will be using.== <!--T:49-->
+
<!--T:73-->
===a. Solid Fuel Forge===
+
<noinclude></translate></noinclude>
====i. Blower====
+
{{CloseReq}} <!-- 6f -->
====ii. Fire Pot or Pan====
+
{{CloseReq}} <!-- 6 -->
====iii. Tuyere====
+
{{ansreq|page={{#titleparts:{{PAGENAME}}|2|1}}|num=7}}
====iv. Ash Dump====
+
<noinclude><translate><!--T:74-->
====v. Clinker Breaker====
+
</noinclude>
====vi. Tuyere Plate====
+
<!-- 7. Explain the two basic classes of forges, (solid fuel and gas), and demonstrate ability to identify the parts of the one you will be using. -->
 +
<noinclude></translate></noinclude>
 +
{{ansreq|page={{#titleparts:{{PAGENAME}}|2|1}}|num=7a}}
 +
<noinclude><translate><!--T:75-->
 +
</noinclude>
 +
<noinclude></translate></noinclude>
 +
{{ansreq|page={{#titleparts:{{PAGENAME}}|2|1}}|num=7ai|dispreq=i}}
 +
<noinclude><translate><!--T:76-->
 +
</noinclude>
 +
<noinclude></translate></noinclude>
 +
{{CloseReq}} <!-- 7ai -->
 +
{{ansreq|page={{#titleparts:{{PAGENAME}}|2|1}}|num=7aii|dispreq=ii}}
 +
<noinclude><translate><!--T:77-->
 +
</noinclude>
 +
<noinclude></translate></noinclude>
 +
{{CloseReq}} <!-- 7aii -->
 +
{{ansreq|page={{#titleparts:{{PAGENAME}}|2|1}}|num=7aiii|dispreq=iii}}
 +
<noinclude><translate><!--T:78-->
 +
</noinclude>
 +
<noinclude></translate></noinclude>
 +
{{CloseReq}} <!-- 7aiii -->
 +
{{ansreq|page={{#titleparts:{{PAGENAME}}|2|1}}|num=7aiv|dispreq=iv}}
 +
<noinclude><translate><!--T:79-->
 +
</noinclude>
 +
<noinclude></translate></noinclude>
 +
{{CloseReq}} <!-- 7aiv -->
 +
{{ansreq|page={{#titleparts:{{PAGENAME}}|2|1}}|num=7av|dispreq=v}}
 +
<noinclude><translate><!--T:80-->
 +
</noinclude>
 +
<noinclude></translate></noinclude>
 +
{{CloseReq}} <!-- 7av -->
 +
{{ansreq|page={{#titleparts:{{PAGENAME}}|2|1}}|num=7avi|dispreq=vi}}
 +
<noinclude><translate><!--T:81-->
 +
</noinclude>
 
   
 
   
===b. Gas Forge===
+
<noinclude></translate></noinclude>
====i. Forge or Fire box====
+
{{CloseReq}} <!-- 7avi -->
====ii. Hose====
+
{{CloseReq}} <!-- 7a -->
====iii. Pressure Gauge====
+
{{ansreq|page={{#titleparts:{{PAGENAME}}|2|1}}|num=7b}}
====iv. Regulator====
+
<noinclude><translate><!--T:82-->
====v. Burner====
+
</noinclude>
 +
<noinclude></translate></noinclude>
 +
{{ansreq|page={{#titleparts:{{PAGENAME}}|2|1}}|num=7bi|dispreq=i}}
 +
<noinclude><translate><!--T:83-->
 +
</noinclude>
 +
<noinclude></translate></noinclude>
 +
{{CloseReq}} <!-- 7bi -->
 +
{{ansreq|page={{#titleparts:{{PAGENAME}}|2|1}}|num=7bii|dispreq=ii}}
 +
<noinclude><translate><!--T:84-->
 +
</noinclude>
 +
<noinclude></translate></noinclude>
 +
{{CloseReq}} <!-- 7bii -->
 +
{{ansreq|page={{#titleparts:{{PAGENAME}}|2|1}}|num=7biii|dispreq=iii}}
 +
<noinclude><translate><!--T:85-->
 +
</noinclude>
 +
<noinclude></translate></noinclude>
 +
{{CloseReq}} <!-- 7biii -->
 +
{{ansreq|page={{#titleparts:{{PAGENAME}}|2|1}}|num=7biv|dispreq=iv}}
 +
<noinclude><translate><!--T:86-->
 +
</noinclude>
 +
<noinclude></translate></noinclude>
 +
{{CloseReq}} <!-- 7biv -->
 +
{{ansreq|page={{#titleparts:{{PAGENAME}}|2|1}}|num=7bv|dispreq=v}}
 +
<noinclude><translate><!--T:87-->
 +
</noinclude>
  
==8. Identify the basic parts of a hammer and list the basic classes of hammers used in blacksmithing. (The shape of a hammer reflects the task that it is designed to do).== <!--T:10-->
+
<!--T:88-->
===a) Parts of a hammer===
+
<noinclude></translate></noinclude>
;i) Handle:
+
{{CloseReq}} <!-- 7bv -->
;ii) Head:
+
{{CloseReq}} <!-- 7b -->
#'''The FACE:'''
+
{{CloseReq}} <!-- 7 -->
#'''The PEEN:'''
+
{{ansreq|page={{#titleparts:{{PAGENAME}}|2|1}}|num=8}}
===b) Types of blacksmith hammers===
+
<noinclude><translate><!--T:89-->
;i) Cross Peen:  
+
</noinclude>
;ii) Angle Peen:
+
<!-- 8. Identify the basic parts of a hammer and list the basic classes of hammers used in blacksmithing. (The shape of a hammer reflects the task that it is designed to do). -->
;iii) In-line or Straight Peen:
+
<noinclude></translate></noinclude>
;iv) Ball Peen:
+
{{ansreq|page={{#titleparts:{{PAGENAME}}|2|1}}|num=8a}}
+
<noinclude><translate><!--T:90-->
==9. Discuss tooling with your instructor, and explain how it is used. Although many types of tooling have handles how is tooling different than a hammer?==
+
</noinclude>
 +
<noinclude></translate></noinclude>
 +
{{ansreq|page={{#titleparts:{{PAGENAME}}|2|1}}|num=8ai|dispreq=i}}
 +
<noinclude><translate><!--T:91-->
 +
</noinclude>
 +
<noinclude></translate></noinclude>
 +
{{CloseReq}} <!-- 8ai -->
 +
{{ansreq|page={{#titleparts:{{PAGENAME}}|2|1}}|num=8aii|dispreq=ii}}
 +
<noinclude><translate><!--T:92-->
 +
</noinclude>
 +
<noinclude></translate></noinclude>
 +
{{CloseReq}} <!-- 8aii -->
 +
{{CloseReq}} <!-- 8a -->
 +
{{ansreq|page={{#titleparts:{{PAGENAME}}|2|1}}|num=8b}}
 +
<noinclude><translate><!--T:93-->
 +
</noinclude>
 +
<noinclude></translate></noinclude>
 +
{{ansreq|page={{#titleparts:{{PAGENAME}}|2|1}}|num=8bi|dispreq=i}}
 +
<noinclude><translate><!--T:94-->
 +
</noinclude>
 +
<noinclude></translate></noinclude>
 +
{{CloseReq}} <!-- 8bi -->
 +
{{ansreq|page={{#titleparts:{{PAGENAME}}|2|1}}|num=8bii|dispreq=ii}}
 +
<noinclude><translate><!--T:95-->
 +
</noinclude>
 +
<noinclude></translate></noinclude>
 +
{{CloseReq}} <!-- 8bii -->
 +
{{ansreq|page={{#titleparts:{{PAGENAME}}|2|1}}|num=8biii|dispreq=iii}}
 +
<noinclude><translate><!--T:96-->
 +
</noinclude>
 +
<noinclude></translate></noinclude>
 +
{{CloseReq}} <!-- 8biii -->
 +
{{ansreq|page={{#titleparts:{{PAGENAME}}|2|1}}|num=8biv|dispreq=iv}}
 +
<noinclude><translate><!--T:97-->
 +
</noinclude>
 +
 
 +
<!--T:98-->
 +
<noinclude></translate></noinclude>
 +
{{CloseReq}} <!-- 8biv -->
 +
{{CloseReq}} <!-- 8b -->
 +
{{CloseReq}} <!-- 8 -->
 +
{{ansreq|page={{#titleparts:{{PAGENAME}}|2|1}}|num=9}}
 +
<noinclude><translate><!--T:99-->
 +
</noinclude>
 +
<!-- 9. Discuss tooling with your instructor, and explain how it is used. Although many types of tooling have handles how is tooling different than a hammer? -->
  
==10. With your instructor, discuss and review the basic types of tongs available in blacksmithing. Tongs are classified by the shape (or description) of the jaw, which affect their use. Some basic types are:== <!--T:11-->
+
<!--T:100-->
 +
<noinclude></translate></noinclude>
 +
{{CloseReq}} <!-- 9 -->
 +
{{ansreq|page={{#titleparts:{{PAGENAME}}|2|1}}|num=10}}
 +
<noinclude><translate><!--T:101-->
 +
</noinclude>
 +
<!-- 10. With your instructor, discuss and review the basic types of tongs available in blacksmithing. Tongs are classified by the shape (or description) of the jaw, which affect their use. Some basic types are: -->
 
;i) Flat:
 
;i) Flat:
 
;ii) Box:
 
;ii) Box:
Line 169: Line 369:
 
;vii) Wolf Jaw:
 
;vii) Wolf Jaw:
  
==11. Discuss how to properly start and put out a fire in the forge you are using.== <!--T:12-->
+
<!--T:102-->
===a) Solid Fuel:===
+
<noinclude></translate></noinclude>
====i) Start ====
+
{{CloseReq}} <!-- 10 -->
====ii) Put Out====
 
===b) Gas===
 
====i) Start ====
 
====ii) Turn Off====
 
  
==12. Discuss how to PROPERLY clean and maintain the blacksmithing equipment you are using.== <!--T:13-->
+
{{ansreq|page={{#titleparts:{{PAGENAME}}|2|1}}|num=11}}
===a) Forge===
+
<noinclude><translate><!--T:103-->
===b) Anvil===
+
</noinclude>
===c) Hammers===
+
<!-- 11. Discuss how to properly start and put out a fire in the forge you are using. -->
===d) Tongs===
+
<noinclude></translate></noinclude>
  
 +
{{ansreq|page={{#titleparts:{{PAGENAME}}|2|1}}|num=11a}}
 +
<noinclude><translate><!--T:155-->
 +
</noinclude>
 +
<noinclude></translate></noinclude>
  
==13. While each hammer, tong, and tool serves a specific function there are only a few foundational skills of a blacksmith. Discuss with your instructor the three to five skills they feel are most important for their style of blacksmithing.== <!--T:14-->
+
{{ansreq|page={{#titleparts:{{PAGENAME}}|2|1}}|num=11ai|dispreq=i}}
===a) Drawing===
+
<noinclude><translate><!--T:156-->
===b) Tapering===
+
</noinclude>
===c) Upsetting===
+
<noinclude></translate></noinclude>
===d) Spreading===
+
{{CloseReq}} <!-- 11ai -->
===e) Twisting ===
+
{{ansreq|page={{#titleparts:{{PAGENAME}}|2|1}}|num=11aii|dispreq=ii}}
===f) Bending===
+
<noinclude><translate><!--T:105-->
===g) Drifting (or Punching)===
+
</noinclude>
===h) Slitting (or Splitting) ===
+
<noinclude></translate></noinclude>
 +
{{CloseReq}} <!-- 11aii -->
 +
{{CloseReq}} <!-- 11a -->
 +
{{ansreq|page={{#titleparts:{{PAGENAME}}|2|1}}|num=11b}}
 +
<noinclude><translate><!--T:106-->
 +
</noinclude>
 +
<noinclude></translate></noinclude>
 +
{{ansreq|page={{#titleparts:{{PAGENAME}}|2|1}}|num=11bi|dispreq=i}}
 +
<noinclude><translate><!--T:107-->
 +
</noinclude>
 +
<noinclude></translate></noinclude>
 +
{{CloseReq}} <!-- 11bi -->
 +
{{ansreq|page={{#titleparts:{{PAGENAME}}|2|1}}|num=11bii|dispreq=ii}}
 +
<noinclude><translate><!--T:108-->
 +
</noinclude>
  
==14. With supervision make two projects.  You will be using low carbon steel at least ¼ inch thick and utilizing techniques your instructor will teach you. These projects need to include the following techniques: == <!--T:15-->
+
<!--T:109-->
===a) Draw out the end of a square piece by forging a round taper, and placing a finial (Curly queue) on the end.===
+
<noinclude></translate></noinclude>
===b) Use the horn of the anvil to forge a U-shaped bend.===
+
{{CloseReq}} <!-- 11bii -->
===c) Form a decorative twist in a piece of square steel.===
+
{{CloseReq}} <!-- 11b -->
 +
{{CloseReq}} <!-- 11 -->
 +
{{ansreq|page={{#titleparts:{{PAGENAME}}|2|1}}|num=12}}
 +
<noinclude><translate><!--T:110-->
 +
</noinclude>
 +
<!-- 12. Discuss how to PROPERLY clean and maintain the blacksmithing equipment you are using. -->
 +
<noinclude></translate></noinclude>
 +
{{ansreq|page={{#titleparts:{{PAGENAME}}|2|1}}|num=12a}}
 +
<noinclude><translate><!--T:111-->
 +
</noinclude>
 +
<noinclude></translate></noinclude>
 +
{{CloseReq}} <!-- 12a -->
 +
{{ansreq|page={{#titleparts:{{PAGENAME}}|2|1}}|num=12b}}
 +
<noinclude><translate><!--T:112-->
 +
</noinclude>
 +
<noinclude></translate></noinclude>
 +
{{CloseReq}} <!-- 12b -->
 +
{{ansreq|page={{#titleparts:{{PAGENAME}}|2|1}}|num=12c}}
 +
<noinclude><translate><!--T:113-->
 +
</noinclude>
 +
<noinclude></translate></noinclude>
 +
{{CloseReq}} <!-- 12c -->
 +
{{ansreq|page={{#titleparts:{{PAGENAME}}|2|1}}|num=12d}}
 +
<noinclude><translate><!--T:114-->
 +
</noinclude>
  
==15. Choose one of the following:== <!--T:16-->
 
===a) Prepare a worship talk discussing blacksmithing from the Bible and/or the spirit of prophecy and discuss its application to our lives.===
 
===b) Write a 250 plus word paper about metal processing or blacksmithing from the Bible and/or the spirit of prophecy and its application to today.===
 
===c) Using your artistic ability, draw, create, make a short video etc., using blacksmithing from the Bible and/or the Spirit of Prophecy to illustrate a spiritual lesson and present to your pathfinder group.===
 
  
==16. Blacksmithing and metal working are ancient arts. When where they first mentioned in the Bible? What kind of things were made?== <!--T:17-->
+
<!--T:115-->
 +
<noinclude></translate></noinclude>
 +
{{CloseReq}} <!-- 12d -->
 +
{{CloseReq}} <!-- 12 -->
 +
{{ansreq|page={{#titleparts:{{PAGENAME}}|2|1}}|num=13}}
 +
<noinclude><translate><!--T:116-->
 +
</noinclude>
 +
<!-- 13. While each hammer, tong, and tool serves a specific function there are only a few foundational skills of a blacksmith. Discuss with your instructor the three to five skills they feel are most important for their style of blacksmithing. -->
 +
<noinclude></translate></noinclude>
 +
{{ansreq|page={{#titleparts:{{PAGENAME}}|2|1}}|num=13a}}
 +
<noinclude><translate><!--T:117-->
 +
</noinclude>
 +
<noinclude></translate></noinclude>
 +
{{CloseReq}} <!-- 13a -->
 +
{{ansreq|page={{#titleparts:{{PAGENAME}}|2|1}}|num=13b}}
 +
<noinclude><translate><!--T:118-->
 +
</noinclude>
 +
<noinclude></translate></noinclude>
 +
{{CloseReq}} <!-- 13b -->
 +
{{ansreq|page={{#titleparts:{{PAGENAME}}|2|1}}|num=13c}}
 +
<noinclude><translate><!--T:119-->
 +
</noinclude>
 +
<noinclude></translate></noinclude>
 +
{{CloseReq}} <!-- 13c -->
 +
{{ansreq|page={{#titleparts:{{PAGENAME}}|2|1}}|num=13d}}
 +
<noinclude><translate><!--T:120-->
 +
</noinclude>
 +
<noinclude></translate></noinclude>
 +
{{CloseReq}} <!-- 13d -->
 +
{{ansreq|page={{#titleparts:{{PAGENAME}}|2|1}}|num=13e}}
 +
<noinclude><translate><!--T:121-->
 +
</noinclude>
 +
<noinclude></translate></noinclude>
 +
{{CloseReq}} <!-- 13e -->
 +
{{ansreq|page={{#titleparts:{{PAGENAME}}|2|1}}|num=13f}}
 +
<noinclude><translate><!--T:122-->
 +
</noinclude>
 +
<noinclude></translate></noinclude>
 +
{{CloseReq}} <!-- 13f -->
 +
{{ansreq|page={{#titleparts:{{PAGENAME}}|2|1}}|num=13g}}
 +
<noinclude><translate><!--T:123-->
 +
</noinclude>
 +
<noinclude></translate></noinclude>
 +
{{CloseReq}} <!-- 13g -->
 +
{{ansreq|page={{#titleparts:{{PAGENAME}}|2|1}}|num=13h}}
 +
<noinclude><translate><!--T:124-->
 +
</noinclude>
  
==17. There are many references to “smiths” in the Bible. What is the significance of the blacksmith in the following texts:== <!--T:18-->
+
<!--T:125-->
===a) {{bible link|1 Samuel 13:19-21}}===
+
<noinclude></translate></noinclude>
 +
{{CloseReq}} <!-- 13h -->
 +
{{CloseReq}} <!-- 13 -->
 +
{{ansreq|page={{#titleparts:{{PAGENAME}}|2|1}}|num=14}}
 +
<noinclude><translate><!--T:126-->
 +
</noinclude>
 +
<!-- 14. With supervision make two projects. You will be using low carbon steel at least ¼ inch thick and utilizing techniques your instructor will teach you. These projects need to include the following techniques: -->
 +
<noinclude></translate></noinclude>
 +
{{ansreq|page={{#titleparts:{{PAGENAME}}|2|1}}|num=14a}}
 +
<noinclude><translate><!--T:127-->
 +
</noinclude>
 +
<noinclude></translate></noinclude>
 +
{{CloseReq}} <!-- 14a -->
 +
{{ansreq|page={{#titleparts:{{PAGENAME}}|2|1}}|num=14b}}
 +
<noinclude><translate><!--T:128-->
 +
</noinclude>
 +
<noinclude></translate></noinclude>
 +
{{CloseReq}} <!-- 14b -->
 +
{{ansreq|page={{#titleparts:{{PAGENAME}}|2|1}}|num=14c}}
 +
<noinclude><translate><!--T:129-->
 +
</noinclude>
 +
 
 +
<!--T:130-->
 +
<noinclude></translate></noinclude>
 +
{{CloseReq}} <!-- 14c -->
 +
{{CloseReq}} <!-- 14 -->
 +
{{ansreq|page={{#titleparts:{{PAGENAME}}|2|1}}|num=15}}
 +
<noinclude><translate><!--T:131-->
 +
</noinclude>
 +
<!-- 15. Choose one of the following: -->
 +
<noinclude></translate></noinclude>
 +
{{ansreq|page={{#titleparts:{{PAGENAME}}|2|1}}|num=15a}}
 +
<noinclude><translate><!--T:132-->
 +
</noinclude>
 +
<noinclude></translate></noinclude>
 +
{{CloseReq}} <!-- 15a -->
 +
{{ansreq|page={{#titleparts:{{PAGENAME}}|2|1}}|num=15b}}
 +
<noinclude><translate><!--T:133-->
 +
</noinclude>
 +
<noinclude></translate></noinclude>
 +
{{CloseReq}} <!-- 15b -->
 +
{{ansreq|page={{#titleparts:{{PAGENAME}}|2|1}}|num=15c}}
 +
<noinclude><translate><!--T:134-->
 +
</noinclude>
 +
 
 +
<!--T:135-->
 +
<noinclude></translate></noinclude>
 +
{{CloseReq}} <!-- 15c -->
 +
{{CloseReq}} <!-- 15 -->
 +
{{ansreq|page={{#titleparts:{{PAGENAME}}|2|1}}|num=16}}
 +
<noinclude><translate><!--T:136-->
 +
</noinclude>
 +
<!-- 16. Blacksmithing and metal working are ancient arts. When where they first mentioned in the Bible? What kind of things were made? -->
 +
 
 +
<!--T:137-->
 +
<noinclude></translate></noinclude>
 +
{{CloseReq}} <!-- 16 -->
 +
{{ansreq|page={{#titleparts:{{PAGENAME}}|2|1}}|num=17}}
 +
<noinclude><translate><!--T:138-->
 +
</noinclude>
 +
<!-- 17. There are many references to “smiths” in the Bible. What is the significance of the blacksmith in the following texts: -->
 +
<noinclude></translate></noinclude>
 +
{{ansreq|page={{#titleparts:{{PAGENAME}}|2|1}}|num=17a}}
 +
<noinclude><translate><!--T:139-->
 +
</noinclude>
 
"Now there was no blacksmith to be found throughout all the land of Israel, for the Philistines said, “Lest the Hebrews make swords or spears.” 20 But all the Israelites would go down to the Philistines to sharpen each man’s plowshare, his mattock, his ax, and his sickle; and the charge for a sharpening was a pim[a] for the plowshares, the mattocks, the forks, and the axes, and to set the points of the goads."
 
"Now there was no blacksmith to be found throughout all the land of Israel, for the Philistines said, “Lest the Hebrews make swords or spears.” 20 But all the Israelites would go down to the Philistines to sharpen each man’s plowshare, his mattock, his ax, and his sickle; and the charge for a sharpening was a pim[a] for the plowshares, the mattocks, the forks, and the axes, and to set the points of the goads."
  
Line 213: Line 557:
 
Israel was oppressed by making sure they had no blacksmiths - a way to prevent them from building weapons. It was also a way to make money off the Israelites, and because the price is mentioned specifically it was evidently very high.
 
Israel was oppressed by making sure they had no blacksmiths - a way to prevent them from building weapons. It was also a way to make money off the Israelites, and because the price is mentioned specifically it was evidently very high.
  
===b) {{bible link|2 Kings 24:14}} === <!--T:20-->
+
<!--T:140-->
 +
<noinclude></translate></noinclude>
 +
{{CloseReq}} <!-- 17a -->
 +
{{ansreq|page={{#titleparts:{{PAGENAME}}|2|1}}|num=17b}} <!--T:20-->
 +
<noinclude><translate><!--T:141-->
 +
</noinclude>
 
"Also he carried into captivity all Jerusalem: all the captains and all the mighty men of valor, ten thousand captives, and all the craftsmen and smiths. None remained except the poorest people of the land."
 
"Also he carried into captivity all Jerusalem: all the captains and all the mighty men of valor, ten thousand captives, and all the craftsmen and smiths. None remained except the poorest people of the land."
  
Line 219: Line 568:
 
Tells how Nebuchadnezzar carried all the important people to Babylon, including the smiths.
 
Tells how Nebuchadnezzar carried all the important people to Babylon, including the smiths.
  
===c) {{bible link|Isaiah 54:16}} === <!--T:22-->
+
<!--T:142-->
 +
<noinclude></translate></noinclude>
 +
{{CloseReq}} <!-- 17b -->
 +
{{ansreq|page={{#titleparts:{{PAGENAME}}|2|1}}|num=17c}} <!--T:22-->
 +
<noinclude><translate><!--T:143-->
 +
</noinclude>
  
 +
<!--T:144-->
 +
<noinclude></translate></noinclude>
 +
{{CloseReq}} <!-- 17c -->
 +
{{CloseReq}} <!-- 17 -->
 +
<noinclude><translate></noinclude>
 
==Be safe and enjoy yourself.== <!--T:23-->
 
==Be safe and enjoy yourself.== <!--T:23-->
Blacksmithing has the potential to cause injury, therefore it must be taught by a competent instructor. To locate an instructor contact your local or state blacksmithing association. Contact information for most states can be found under the affiliates tab on the ABANA Website at http://www.abana.org/. Contact your state or local affiliate to find out if they have an instructor in your area.
+
Blacksmithing has the potential to cause injury, therefore it must be taught by a competent instructor. To locate an instructor contact your local or state blacksmithing association. Contact information for most states can be found under the affiliates tab on the ABANA Website at http://www.abana.org/. Contact your state or local affiliate to find out if they have an instructor in your area.
Due to the hazards involved, and the manual dexterity required, it is recommended that the honor be limited to teens, TLT’s, and adult leaders with a ratio of no more than 4 students per instructor/forge. You will also need 1 anvil for every 2 students or a lot more time and extra steel to replace the steel that is burned up.
+
Due to the hazards involved, and the manual dexterity required, it is recommended that the honor be limited to teens, TLT’s, and adult leaders with a ratio of no more than 4 students per instructor/forge. You will also need 1 anvil for every 2 students or a lot more time and extra steel to replace the steel that is burned up.
  
 
==Resources== <!--T:24-->
 
==Resources== <!--T:24-->
 
===Books:===
 
===Books:===
*[http://www.amazon.com/Anvils-America-Richard-Postman/dp/0966325605/ref=sr_1_1?ie=UTF8&qid=1427644625&sr=8-1&keywords=Anvils+America Anvils in America, by Richard Postman. 1998 ISBN-10: 9066325605]
+
* [http://www.amazon.com/Anvils-America-Richard-Postman/dp/0966325605/ref=sr_1_1?ie=UTF8&qid=1427644625&sr=8-1&keywords=Anvils+America Anvils in America, by Richard Postman. 1998 ISBN-10: 9066325605]
*[http://www.amazon.com/Backyard-Blacksmith-Lorelei-Sims/dp/0785825673/ref=sr_1_1?ie=UTF8&qid=1427644694&sr=8-1&keywords=Backyard+Blacksmith The Backyard Blacksmith, by Lorelei Sims. 2006 ISBN-10: 592532519]
+
* [http://www.amazon.com/Backyard-Blacksmith-Lorelei-Sims/dp/0785825673/ref=sr_1_1?ie=UTF8&qid=1427644694&sr=8-1&keywords=Backyard+Blacksmith The Backyard Blacksmith, by Lorelei Sims. 2006 ISBN-10: 592532519]
  
 
===Instructional Videos:=== <!--T:25-->
 
===Instructional Videos:=== <!--T:25-->
*[http://www.calerinforge.com/calerin-forge-videos.html Basic Blacksmith Shop Tools by David Burress of Calerin Forge. Nov. 2013.]
+
* [http://www.calerinforge.com/calerin-forge-videos.html Basic Blacksmith Shop Tools by David Burress of Calerin Forge. Nov. 2013.]
*[https://www.youtube.com/watch?v=82xI5GOvGg8 Do's and Don'ts of Blacksmithing by RealWoodsmen. Sept. 2013.]
+
* [https://www.youtube.com/watch?v=82xI5GOvGg8 Do's and Don'ts of Blacksmithing by RealWoodsmen. Sept. 2013.]
*[https://www.youtube.com/watch?v=ZToka1-8oQA Essentials of Blacksmithing by The Consummate Dabbler. Apr. 2014.]
+
* [https://www.youtube.com/watch?v=ZToka1-8oQA Essentials of Blacksmithing by The Consummate Dabbler. Apr. 2014.]
*[https://www.youtube.com/watch?v=ozCdCdGOliE&list=PLix__fGJ5GkhxCr9fTQyZIWCS5Tul3j_L BBC Presents Mastercrafts of Blacksmithing by 3 River Blades. Dec. 2012.]
+
* [https://www.youtube.com/watch?v=ozCdCdGOliE&list=PLix__fGJ5GkhxCr9fTQyZIWCS5Tul3j_L BBC Presents Mastercrafts of Blacksmithing by 3 River Blades. Dec. 2012.]
 
===Websites and Online Resources:===
 
===Websites and Online Resources:===
*[http://www.abana.org/ anvilfire.com!] An online question and answer forum, excellent resource.
+
* [http://www.abana.org/ anvilfire.com!] An online question and answer forum, excellent resource.
*[http://www.abana.org/ Artist Blacksmith's Association of North America (ABANA).] Use them to find a local affiliate.
+
* [http://www.abana.org/ Artist Blacksmith's Association of North America (ABANA).] Use them to find a local affiliate.
*[http://www.blacksmithsdepot.com Kayne & Sons Blacksmith's Depot] carries a complete selection of blacksmithing supplies. I recommend the wolf jaw set as a starter set of tongs.
+
* [http://www.blacksmithsdepot.com Kayne & Sons Blacksmith's Depot] carries a complete selection of blacksmithing supplies. I recommend the wolf jaw set as a starter set of tongs.
 +
<noinclude></translate></noinclude>
  
<!--T:26-->
+
[[Category:Instructor Required{{GetLangSuffix}}|{{SUBPAGENAME}}]]
[[Category:Adventist Youth Honors Answer Book|{{SUBPAGENAME}}]]
+
{{CloseHonorPage}}
[[Category:Instructor Required|{{SUBPAGENAME}}]]
 
<noinclude></translate></noinclude>
 

Latest revision as of 21:12, 1 January 2023

Other languages:
English • ‎español
Blacksmithing

Skill Level

2

Year

2015

Version

28.03.2024

Approval authority

North American Division

Blacksmithing AY Honor.png
Blacksmithing
Vocational
Skill Level
123
Approval authority
North American Division
Year of Introduction
2015


1

Define blacksmith and blacksmithing.


Blacksmith
A person who makes or repairs things made of iron, iron alloys or other malleable metal, by hand. While many times they are the same person, for the purpose of this honor the blacksmith makes the shoes, a farrier shoes the horse.
Blacksmithing
The art of working iron with a forge, anvil, hammer, and other tools.


2

While both forging and fabrication can be a part of blacksmithing, your projects may or may not include fabrication. Discuss with your instructor the basic differences between forging and fabrication and be able to explain the differences.


Forging
The process of hammering the metal into a desired shape while the metal is hot and in a plastic state. Usually the finished item bears no resemblance to the original piece of metal.
Fabrication
Involves cutting pieces of dimensional stock and assembling the pieces into the desired item, usually by welding.


3

Discuss with your instructor the safety rules for blacksmithing. Be sure you understand why they are important, and explain or demonstrate them when asked.


  • Wear natural fiber clothing, such as cotton, wool and/or leather.
    • When synthetics such as Nylon, Rayon, etc. catch fire, they can melt to the skin causing a severe burn.
  • Wear safety goggles or safety glasses at all times.
    • Steel forms an oxidized layer when heated to at least a red heat. This layer is called scale and is loosely attached. This scale is very hot and flies off when you hit it.
  • Wear hearing protection, such as ear plugs or ear muffs.
    • The ring of the anvil can cause tinnitus and hearing loss.
  • Wear good fitting CLOSED TOE shoes. Flip flops or sandals are NOT allowed! (Ideally the shoes should come up under the pants like leather boots, or high top sneakers.)
    • Scale is very hot and can cause serious burns.
    • Steel and other metals are heavy, even when dropped from 30 inches, they can cause an injury.
  • When working with a coal forge DO NOT pour water directly on a hot forge, with or without coals.
    • Pouring water on a hot forge may cause an explosion and can crack the forge.
  • Wearing leather chaps, a welder’s apron or even a cotton machinist apron is recommended.
    • An apron helps protect your clothing from damage. Blacksmithing, particularly with coal, is very dirty.
  • Wearing gloves is optional and generally not recommended.
    • Most gloves will not protect you from burning your skin, if contact occurs with the metal when working at forging temperatures.
    • Gloves tend to give beginners a false sense of security.
  • DO NOT heat galvanized metal as the fumes are DEADLY. It causes zinc poisoning. Never put anything galvanized in the fire, be particularly careful when using reclaimed metal. Several experienced smiths have died from zinc poisoning.
    • Make sure you have adequate ventilation. Carbon Monoxide (CO) is deadly, and the smoke can cause an asthmatic reaction.


4

As you discuss with your instructor the process of treating metal, develop a basic understanding of the principles of hardening and tempering metal.


When metal is hot and in a plastic state, the atoms are excited and moving. To harden the metal you need to quench it (cool it rapidly) and freeze the atoms in a crystalline structure. However this rapid cooling makes the steel very brittle, as the crystalline structure is very random.

Therefore you temper the metal. Tempering is the process of re heating the metal to a critical point lower than the temperature it was before it was hardened and allowing it to cool more slowly. This process allows the atoms to align themselves in a more uniform structure, making the metal “flexible” and less likely to shatter.

For steel to harden properly, you must use a high carbon steel. If you harden a low carbon steel it will revert back to its un-hardened state as the atoms are always moving and do not have the crystalline carbon structure to keep them in place. In the advanced honor you will be asked to make a chisel, then harden and temper it.


5

Identify and explain the nine basic items required for blacksmithing.



5a

Forge


A place to build a contained fire which will reach over 2,000° Fahrenheit.



5b

Fuel


A material capable of producing temperatures greater than 2,000° Fahrenheit.

COAL – The best coal for blacksmithing is usually bituminous (pronounced bi·tu·mi·nous) or soft coal, as it tends to have less sulfur, and starts easier. Therefore soft coal is generally preferred by beginning smiths.

Lignite (pronounced lig·nite), sub-bituminous, and anthracite (pronounced an·thra·cite), or hard coal tend to have too much sulfur and other impurities frequently making them less suitable for forging. However since anthracite is still used as a heat source in some parts of the United States it tends to be easier to find and less expensive than soft coal thus many experienced smiths have switched to it. Coal is a natural product and has different characteristics depending on how it was formed. The vein or mine it comes from will also determine the quality of the coal, and the impurities it contains.

COKE – Coke is formed when coal is heated and the impurities are driven out. Coke is almost pure carbon.

Propane (or Natural Gas)

Other Less Common Fuels such as Wood, Charcoal, Corn husks, Etc.



5c

Blower (or Bellows) and Ducting


To introduce large quantities of air to the fire. Not required for some natural gas or propane forges.



5d

Anvil


Is either traditional / commercially made or made from available materials such as a railroad track. In accordance with Newton’s third law of motion. “For every action, there is an equal and opposite reaction.” The anvil works the other side of the metal you are pounding on.



5e

Hammer


Or other suitable object that can be used to pound on the metal.



5f

Tongs


That are long enough and strong enough to retrieve and hold hot metal as it is moved to and from the fire.



5g

Vise


Has a long leg that transfers some of the force to the ground. It is used to hold and clamp a piece of metal while it is twisted, hammered or otherwise worked. Also known as a blacksmith vise, stump vise, pole vise or post vise.



5h

Safety Glasses


Used to protect your eyes from flying scale, sparks, etc.



5i

Ear Plugs


Or ear muffs to protect your hearing.



6

Identify the parts of a London pattern anvil and identify their uses.


London pattern anvil

Anvils come in many shapes and sizes. The shape that is most common today is the “London Pattern” which became common in the 1800s. While the size of the different parts vary from anvil to anvil, most anvils have the following standard features: A body, a face, a horn, a step, a Hardie (or Hardy) hole, and a Pritchel hole.


6a

The body (and base):


The body (and base) help form the mass of the anvil and most work is performed over these areas.


6b

The horn


The horn or “front” end of the anvil is curved. This allows the smith to hammer different curves into the piece they are working on. The resulting curve depends on how the piece is held, as well as which part of the horn is used while the smith hammers on it. The horn can also be known as a Bick, a Beak or a Pike.


6c

Table or step


The table or step is a flat area above the horn, lower than the face. This area is often used as a cutting area, to prevent damage to the face.


6d

The face


The face is the main large rectangular flat area where most of the work takes place. It also contains the Hardie hole and the Pritchel hole.


6e

The Hardie or Hardy hole


The Hardie, or Hardy, hole is a square hole through the anvil that allows you to secure various tools called hardies. These hardies can include hot or cold cut chisels, various Swages (used for shaping or marking the metal, in general a block of metal with a recess for forcing the metal into the shape of the recess), Bickerns (smaller, specialized versions of the horn), lower fullers, etc.


6f

The Pritchel hole


The Pritchel hole is a round hole meant as an aid in drifting (punching) holes through the metal you’re working on.



7

Explain the two basic classes of forges, (solid fuel and gas), and demonstrate ability to identify the parts of the one you will be using.


7a

Solid Fuel Forge


i

Blower



ii

Fire Pot or Pan



iii

Tuyere



iv

Ash Dump



v

Clinker Breaker



vi

Tuyere Plate




7b

Gas Forge


i

Forge or Fire box



ii

Hose



iii

Pressure Gauge



iv

Regulator



v

Burner





8

Identify the basic parts of a hammer and list the basic classes of hammers used in blacksmithing. (The shape of a hammer reflects the task that it is designed to do).


8a

Parts of a hammer


i

Handle



ii

Head:
1) The FACE:
2)The PEEN:




8b

Types of blacksmith hammers


i

Cross Peen



ii

Angle Peen



iii

In-line or Straight Peen



iv

Ball Peen





9

Discuss tooling with your instructor, and explain how it is used. Although many types of tooling have handles how is tooling different than a hammer?



10

With your instructor, discuss and review the basic types of tongs available in blacksmithing. Tongs are classified by the shape (or description) of the jaw, which affect their use. Some basic types are: flat, box, bolt, V, clip (ring), scrolling, wolf jaw


i) Flat
ii) Box
iii) Bolt
iv) V
v) Clip (ring)
vi) Scrolling
vii) Wolf Jaw



11

Discuss how to properly start and put out a fire in the forge you are using.



11a

Solid Fuel:



i

Start



ii

Put Out




11b

Gas


i

Start



ii

Turn Off





12

Discuss how to PROPERLY clean and maintain the blacksmithing equipment you are using.


12a

Forge



12b

Anvil



12c

Hammers



12d

Tongs





13

While each hammer, tong, and tool serves a specific function there are only a few foundational skills of a blacksmith. Discuss with your instructor the three to five skills they feel are most important for their style of blacksmithing.


13a

Drawing



13b

Tapering



13c

Upsetting



13d

Spreading



13e

Twisting



13f

Bending



13g

Drifting (or Punching)



13h

Slitting (or Splitting)




14

With supervision make two projects. You will be using low carbon steel at least ¼ inch thick and utilizing techniques your instructor will teach you. These projects need to include the following techniques:


14a

Draw out the end of a square piece by forging a round taper, and placing a finial (Curly queue) on the end.



14b

Use the horn of the anvil to forge a U-shaped bend.



14c

Form a decorative twist in a piece of square steel.




15

Choose one of the following:


15a

Prepare a worship talk discussing blacksmithing from the Bible and/or the spirit of prophecy and discuss its application to our lives.



15b

Write a 250 plus word paper about metal processing or blacksmithing from the Bible and/or the spirit of prophecy and its application to today.



15c

Using your artistic ability, draw, create, make a short video etc., using blacksmithing from the Bible and/or the Spirit of Prophecy to illustrate a spiritual lesson and present to your pathfinder group.




16

Blacksmithing and metal working are ancient arts. When where they first mentioned in the Bible? What kind of things were made?



17

There are many references to “smiths” in the Bible. What is the significance of the blacksmith in the following texts:



"Now there was no blacksmith to be found throughout all the land of Israel, for the Philistines said, “Lest the Hebrews make swords or spears.” 20 But all the Israelites would go down to the Philistines to sharpen each man’s plowshare, his mattock, his ax, and his sickle; and the charge for a sharpening was a pim[a] for the plowshares, the mattocks, the forks, and the axes, and to set the points of the goads."

Israel was oppressed by making sure they had no blacksmiths - a way to prevent them from building weapons. It was also a way to make money off the Israelites, and because the price is mentioned specifically it was evidently very high.



"Also he carried into captivity all Jerusalem: all the captains and all the mighty men of valor, ten thousand captives, and all the craftsmen and smiths. None remained except the poorest people of the land."

Tells how Nebuchadnezzar carried all the important people to Babylon, including the smiths.






Be safe and enjoy yourself.

Blacksmithing has the potential to cause injury, therefore it must be taught by a competent instructor. To locate an instructor contact your local or state blacksmithing association. Contact information for most states can be found under the affiliates tab on the ABANA Website at http://www.abana.org/. Contact your state or local affiliate to find out if they have an instructor in your area. Due to the hazards involved, and the manual dexterity required, it is recommended that the honor be limited to teens, TLT’s, and adult leaders with a ratio of no more than 4 students per instructor/forge. You will also need 1 anvil for every 2 students or a lot more time and extra steel to replace the steel that is burned up.

Resources

Books:

Instructional Videos:

Websites and Online Resources: