AY Honors/Shoe Repair/Answer Key

From Pathfinder Wiki
< AY Honors‎ | Shoe RepairAY Honors/Shoe Repair/Answer Key /
Revision as of 09:29, 15 October 2006 by 200.215.118.36 (talk)

Template:Honor header

... no changes ... no changes ... no changes ... no changes ... no changes ... no changes ... no changes ... no changes ... no changes ... no changes ... no changes ... ==1. Name at least five essential parts of a shoe and explain their uses.==

Sole

The bottom of a shoe, which supports the wearer's foot, is named the sole. It usually consists of several layers, and is usually a separate piece from the upper shoe (though not always, as in the case of wooden shoes).

Insole

The insole is the interior bottom of the shoe, which sits directly beneath the foot. Many shoes ha

2. What is the difference between hand-turned soles, Goodyear welt soles, and McKay sewed soles? Which is the easiest to repair?

Hand-turned soles
This type of shoe is built inside-out using a form called a last. A last is a foot-shaped tool, traditionally made of wood. After the uppers are made and stitched together, they are removed from the last, turned inside-out, and the sole is attached. The sole is of one piece - the topside of the sole serves as the insole, and the bottom side serves as the outsole.
Goodyear welt soles
In a shoe of this type, the uppers, insole, and midsole are stiched on to the outsole. This is the most secure way to attach the sole. the insoles are built in to the shoe rather than being inserted after the rest of the shoe has been built. The upper is drawn over the sole and held temporarily while a strip of leather (the welt) is stitched to the upper and inner sole. The sole is hand-stitched through the Welt to complete the process. This construction allows multiple sole replacements, extending the life of the footwear.
McKay sewed soles
Ten years after the invention of the sewing machine, Gordon McKay introduced a device for machine-stitching a shoe's upper to its sole.

3. Properly wax the thread, and with two needles or waxed ends, mend a pair of shoes that have rips in them. Use the double-stitch method of sewing.

4. Satisfactorily half-sole a pair of shoes by nailing the soles on. Make sure the nails are of the proper length.

5. Fit and attach a pair of rubber heels.

6. What kind of leather should be used in repairing the soles of shoes? How is such leather generally tanned?

7. Specify at least three factors that should be taken into account in the selection of shoes.

8. Spend a minimum of five hours observing shoe repair specialists at their work shop.

9. Write or tell the examiners the proper methods of cleaning and caring for shoes.

Keep your shoes looking their best by using a cedar shoe tree. These are foot-shaped blocks of cedar wood that fit inside the shoe. Cedar absorbs moisture and salt which can damage your shoes. Clean shoes right away when they become dirty. There are four basic steps in caring for smooth leather shoes: clean, condition, polish, and weatherproof.

Clean

First you should lay some newspapers out on your work area and remove the laces from the shoes. Brush the dirt off with a soft brush, and then apply saddle soap or leather cleaner to the shoe with a soft cloth (you can use a shoe shine cloth or an old T-shirt). Work it in, and then start to shine the shoe.

Condition

Once the shoe has been cleaned, you can apply a conditioner. You can buy cleaners with conditioners in them, but you'll get better results using a seperate conditioner. The conditioner is worked into the leather just as the cleaner was, and it helps to moisturize the leather to prevent cracking. In dry climates, you may need to condition your shoes more often.

Polish

Most of us are familiar with the liquid shoe polish products that come in a bottle with a brush built into the lid. These polishes work well enough, but the polish only barely penetrates the surface of the leather and has to be re-applied frequently. It is better to use a show paste, but best to use a shoe cream. Whichever you choose, you will have to match the color of the product to the color of the shoe. Test in an inconspicuous area to make sure that you have a good color match. Apply shoe cream with a soft cloth and rub it in well. Then let it dry thoroughly. Once dry, you can go over it again with a soft cloth to bring out the shine.

Weatherproof

If you are more interested in protecting the shoes than in making them look good, you can use beeswax to wetherproof them. Beeswax will change the look of the shoe, but it is most excellent for keeping the water out. This would be a good choice for work or hiking boots. For dress shoes, you will want to use a spray-on product which goes on invisibly. It will protect your shoes from incidental contact with water, but you should not rely on this stuff for wading through puddles.

References