Revision as of 20:00, 28 November 2020

Other languages:

Skateboarding

Authority:
Category:
Skill Level:
Year Introduced:

Requirements

1. Use the following safety gear and know why it should be worn when skateboarding: helmet, elbow pads, knee pads, high top boots, wrist support gloves.

2. Name all the parts of a skateboard.

3. Completely disassemble and reassemble a skateboard, repacking the bearings and setting wheelnuts and truck pivoting nut at correct tension.

4. Demonstrate eight skateboarding skills which will include some of the following and do them to the instructors satisfaction on authorized property. Five of these should be demonstrated on a skateboarding ramp.

a. Tick Tack—from a standing start to a minimum of 10 meters on level ground

b. Ollie—minimum of 10 centimeters

c. Rail Slide—minimum of 1 meter

d. Drop In—off a ramp 2-3 meters high

e. Gurreo Slide

f. 4-Wheel Look Up

g. Pump on a ramp up to the Coping

h. Acid Drop

i. Kick Flip

j. Ollie up a Gutter

k. Front-Back side grind

l. Carve

m. Pump

@@ Line 1: / Line 1: @@
-;Candles: With candles, a pioneer did not have to worry about spilling lamp fuel, breaking lamps, or replacing wicks and broken chimneys. Candles were cheaper and more portable than lamps.  An average, middle-class household in the 1800s used approximately one hundred pounds of candles per year.
+<languages /><br />
+<translate>{{RequirementsHeader}}</translate>
+==<translate>Requirements</translate>==
+'''1. <section begin=req1 /><translate>
+Use the following safety gear and know why it should be worn when skateboarding: helmet, elbow pads, knee pads, high top boots, wrist support gloves.
+</translate><section end=req1 />'''
+'''2. <section begin=req2 /><translate>
+Name all the parts of a skateboard.
+</translate><section end=req2 />'''
+'''3. <section begin=req3 /><translate>
+Completely disassemble and reassemble a skateboard, repacking the bearings and setting wheelnuts and truck pivoting nut at correct tension.
+</translate><section end=req3 />'''
+'''4. <section begin=req4 /><translate>
+Demonstrate eight skateboarding skills which will include some of the following and do them to the instructors satisfaction on authorized property. Five of these should be demonstrated on a skateboarding ramp.
+</translate><section end=req4 />'''
+:'''a. <section begin=req4a /><translate>
+Tick Tack—from a standing start to a minimum of 10 meters on level ground
+</translate><section end=req4a />'''
+:'''b. <section begin=req4b /><translate>
+Ollie—minimum of 10 centimeters
+</translate><section end=req4b />'''
+:'''c. <section begin=req4c /><translate>
+Rail Slide—minimum of 1 meter
+</translate><section end=req4c />'''
+:'''d. <section begin=req4d /><translate>
+Drop In—off a ramp 2-3 meters high
+</translate><section end=req4d />'''
+:'''e. <section begin=req4e /><translate>
+Gurreo Slide
+</translate><section end=req4e />'''
+:'''f. <section begin=req4f /><translate>
+-Wheel Look Up
+</translate><section end=req4f />'''
+:'''g. <section begin=req4g /><translate>
+Pump on a ramp up to the Coping
+</translate><section end=req4g />'''
+:'''h. <section begin=req4h /><translate>
+Acid Drop
+</translate><section end=req4h />'''
+:'''i. <section begin=req4i /><translate>
+Kick Flip
+</translate><section end=req4i />'''
+:'''j. <section begin=req4j /><translate>
+Ollie up a Gutter
+</translate><section end=req4j />'''
+:'''k. <section begin=req4k /><translate>
+Front-Back side grind
+</translate><section end=req4k />'''
+:'''l. <section begin=req4l /><translate>
+Carve
+</translate><section end=req4l />'''
+:'''m. <section begin=req4m /><translate>
+Pump
+</translate><section end=req4m />'''
+[[Category:Honor Requirements|{{#titleparts:{{PAGENAME}}|1|3}}]]
+[[Category:Honor Requirement By Sections|{{#titleparts:{{PAGENAME}}|1|3}}]]

Difference between revisions of "AY Honors/Skateboarding/Requirements"

Revision as of 20:00, 28 November 2020

Skateboarding

Requirements