Difference between revisions of "AY Honors/Masonry/Requirements"

From Pathfinder Wiki
< AY Honors‎ | MasonryAY Honors/Masonry/Requirements
m (Add RequirementsHeader)
(Bot: Automated import of articles *** existing text overwritten ***)
Line 1: Line 1:
Whether you choose glazed or unglazed tile, both types have their own unique qualities. As always, it’s best to know the needs of your space and the look you are after. This way, your flooring project will be something you can enjoy for many years in the future.
+
<languages /><br />
 +
<translate>{{RequirementsHeader}}</translate>
 +
==<translate>Requirements</translate>==
 +
 
 +
<b>1. <translate><section begin=req1 />Name at least six materials commonly used by masons in the erection of walls or buildings.
 +
<section end=req1 /></translate></b>
 +
 
 +
<b>2. <translate><section begin=req2 />Demonstrate ability to use properly the following:
 +
<section end=req2 /></translate></b>
 +
 
 +
:<b>a. <translate><section begin=req2a />Plumb line
 +
<section end=req2a /></translate></b>
 +
 
 +
:<b>b. <translate><section begin=req2b />Line stretcher (chicken legs)
 +
<section end=req2b /></translate></b>
 +
 
 +
:<b>c. <translate><section begin=req2c />Level
 +
<section end=req2c /></translate></b>
 +
 
 +
:<b>d. <translate><section begin=req2d />Trowel
 +
<section end=req2d /></translate></b>
 +
 
 +
:<b>e. <translate><section begin=req2e />S-tool
 +
<section end=req2e /></translate></b>
 +
 
 +
:<b>f. <translate><section begin=req2f />Mason's hammer
 +
<section end=req2f /></translate></b>
 +
 
 +
<b>3. <translate><section begin=req3 />Demonstrate a knowledge of building cement characteristics (know how to prevent sweating, cracking, shrinking, crumbling, and loss of strength).
 +
<section end=req3 /></translate></b>
 +
 
 +
<b>4. <translate><section begin=req4 />Make usable mortar and state proper proportions of ingredients (lime, sand, etc.).
 +
<section end=req4 /></translate></b>
 +
 
 +
<b>5. <translate><section begin=req5 />Lay a straight stone, brick, or block masonry wall at least four feet (1.2 meters) high and ten feet (3.0 meters) long, including an inside or outside corner (surface must be struck and broomed).
 +
<section end=req5 /></translate></b>
 +
 
 +
<b>6. <translate><section begin=req6 />Pour a level footing, using hand mixed cement and proper reinforcement.
 +
<section end=req6 /></translate></b>
 +
 
 +
<b>7. <translate><section begin=req7 />Make the forms and lay a piece of concrete walk or floor, using commercially mixed cement. Finish it and rule it.
 +
<section end=req7 /></translate></b>
 +
 
 +
<b>8. <translate><section begin=req8 />Write a paragraph describing the behavior of cement; that is, its reaction to water, its adhesive qualities, how long it takes to set, etc.  
 +
<section end=req8 /></translate></b>
 +
 
 +
[[Category:Honor Requirements|{{#titleparts:{{PAGENAME}}|1|3}}]]
 +
[[Category:Honor Requirements Revision 2|{{#titleparts:{{PAGENAME}}|1|3}}]]

Revision as of 16:17, 29 November 2020

Other languages:
English • ‎español



Masonry

Authority:
Category:
Skill Level:
Year Introduced:
Masonry AY Honor.png

Requirements

1. Name at least six materials commonly used by masons in the erection of walls or buildings.

2. Demonstrate ability to use properly the following:

a. Plumb line

b. Line stretcher (chicken legs)

c. Level

d. Trowel

e. S-tool

f. Mason's hammer

3. Demonstrate a knowledge of building cement characteristics (know how to prevent sweating, cracking, shrinking, crumbling, and loss of strength).

4. Make usable mortar and state proper proportions of ingredients (lime, sand, etc.).

5. Lay a straight stone, brick, or block masonry wall at least four feet (1.2 meters) high and ten feet (3.0 meters) long, including an inside or outside corner (surface must be struck and broomed).

6. Pour a level footing, using hand mixed cement and proper reinforcement.

7. Make the forms and lay a piece of concrete walk or floor, using commercially mixed cement. Finish it and rule it.

8. Write a paragraph describing the behavior of cement; that is, its reaction to water, its adhesive qualities, how long it takes to set, etc.