Difference between revisions of "AY Honors/Knot/Double sheet bend"

Latest revision as of 04:07, 15 July 2022

Double sheet bend

Use: The double sheet bend or double becket bend is a strong knot used to tie two ropes (usually of different thicknesses or rigidity) together. It is a doubled version of the sheet bend.

How to tie:

To tie the double sheet bend, start by making a bight in the larger line. Pass the working end of the smaller line up through the bight, around behind the bight, and beneath the loop in the smaller line (that's a sheet bend). Then once again, pass the working end along the same path, around behind the bight and beneath the loop in the smaller line.

WARNING: As with the standard sheet bend, the two free ends should end up on the same side of the knot. If they do not, a left-handed double sheet bend results, which is much weaker.

@@ Line 1: / Line 1: @@
-[[Image:Double sheet bend.jpg|thumb|right|300px|Double sheet bend tied between two different nylon ropes.]]
+<noinclude><translate><!--T:2-->
-The '''double sheet bend''' is a strong knot used to tie two ropes (usually of different thicknesses or rigidity) together. It is a doubled version of the [[sheet bend]].
+</noinclude>
+{{Knot
-To tie the double sheet bend, start by making a [[knot|bight]] in the smaller line. Pass the working end of the larger line up through the bight, around behind the bight, and through the loop in the larger line (that's a sheet bend). Then once again, pass the working end along the same path, around behind the bight and through the loop in the larger line.
+| name=Double sheet bend
+| image= Double sheet bend.jpg
-==External links==
+| use=
-* http://www.geocities.com/roo_two/sheetbend.html &mdash; diagram
+The '''double sheet bend''' or '''double becket bend''' is a strong knot used to tie two ropes (usually of different thicknesses or rigidity) together. It is a doubled version of the sheet bend.
+|tying_instructions =
-{{knot-stub}}
+To tie the double sheet bend, start by making a bight in the larger line. Pass the working end of the smaller line up through the bight, around behind the bight, and beneath the loop in the smaller line (that's a sheet bend). Then once again, pass the working end along the same path, around behind the bight and beneath the loop in the smaller line.
-[[Category:Knots]]
+|warnings=As with the standard sheet bend, the two free ends should end up on the same side of the knot. If they do not, a ''left-handed double sheet bend'' results, which is much weaker.
-[[ja:&#20108;&#37325;&#32153;&#12366;]]
+}}
-[[de:Schotstek]]
+<noinclude></translate></noinclude>