(3 intermediate revisions by the same user not shown)
Line 1:
Line 1:
−
Follow this procedure:
+
{{Species id
−
# Rinse the alga to remove salt, sand, and foreign particles.
+
| common_name = Kelp
−
# place one of the small pieces of plywood on a work surface and cover it with a layer of blotter paper (or newspaper).
+
| latin_name = Macrocystis
−
# Fill the shallow pan with water and float the mounting paper in it.
+
| color = tan
−
# Float the algae specimen on the mounting paper, spreading the fronds out as best you can.
+
| image = Giantkelp2 300.jpg
−
# Carefully lift the mounting paper with the algae specimen out of the water, draining off the water as you lift it up.
+
| image_caption = ''Macrocystis pyrifera''
−
# Lay the mounting paper on the blotter paper placed on the sheet of plywood earlier.
+
| description = ''Macrocystis'' is a genus of kelp, some species of which are so huge that the plants may grow to up to 60m. The stipes arise from a holdfast and branch three or four times from near the base. Blades develop at irregular intervals along the stipe. M. pyrifera grows to over 45 m long. The stipes are unbranched and each has a gas bladder at its base.
−
# Cover the sample (still on the mounting paper) with a sheet of wax paper
+
}}
−
# Put your name and the specimen's identity on the mailing label, and place it on the wax paper.
−
# Cover this with another layer of blotter paper and/or newspaper.
−
# Repeat for each sample, stacking them on atop the other, separated by blotters.
−
# When the last specimen has been covered, lay the second piece of plywood over assembly.
−
# Bind the "sandwich" with the nylon straps or belts, and tighten as best you can. Alternately, you could use C-clamps to clamp the sandwich together, or you could place heavy weights on the entire assembly.
−
# Place in a well-ventilated area
−
# Change the newspaper and blotter paper daily for the next five days or until the samples are dry,
Description:Macrocystis is a genus of kelp, some species of which are so huge that the plants may grow to up to 60m. The stipes arise from a holdfast and branch three or four times from near the base. Blades develop at irregular intervals along the stipe. M. pyrifera grows to over 45 m long. The stipes are unbranched and each has a gas bladder at its base.
