Difference between revisions of "AY Honors/Skateboarding/Answer Key/es"

Patineta
Patineta
Actividades recreacionales
	Nivel de destreza 123
Autoridad de aprobación Asociación General	Año de introducción 1986

Latest revision as of 23:58, 18 July 2022

Other languages:

English • ‎español • ‎français

Patineta

Nivel de destreza

2

Año

1986

Version

22.11.2024

Autoridad de aprobación

Asociación General

1

Utilizar el siguiente equipo de seguridad y saber por qué debe usarse para el patinaje: casco, coderas, rodilleras, botas altas, guantes con apoyo para la muñenca.

Casco
Coderas
Rodilleras
Botas altas
Guantes con apoyo para la muñeca

2

Nombrar todas las partes de una patineta.

3

Desmontar completamente y volver a ensamblar una patineta, re-ensamblando los cojinetes y colocando las tuercas y las tuercas pivotantes en la tensión correcta.

4

Demostrar ocho habilidades con la patineta que incluyan algunos de los siguientes trucos y hacerlos a la satisfacción de los instructores en propiedad autorizada. Cinco de éstos deben demostrarse en una rampa de patinaje.

4a

Serpentear (Tick Tack) desde la posición de pie en la patineta alcanzado un mínimo de 10 metros sobre el terreno nivelado

4b

Salto con la patineta (Ollie) un mínimo de 10 cm

4c

Deslizado por un riel un mínimo de 1 metro

4d

Entrada y salida en una rampa de 2–3 metros de altura

4e

Deslizado con giro (Gurreo slide)

4f

Las 4-ruedas mirando hacia arriba

4g

Subir en una rampa hasta el borde

4h

Gota de ácido

4i

Voltear

4j

Salto (Ollie) en un canalón

4k

Rechinar de lado adelante-atrás

4l

Forjar

4m

Bomba

**Nota: la especialidad de patineta no está disponible en la División Norteamericana por regulaciones del seguro.

Referencias

@@ Line 1: / Line 1: @@
-<languages /><br />
+{{HonorSubpage}}
-<noinclude></noinclude>
-{{honor_desc/es
-|stage=00
-|honorname=Patineta
-|skill=2
-|year=1986
-|category=Actividades recreacionales
-|authority=Asociación General
-|insignia_source=SPD
-|insignia=Skateboarding_Honor.png
-}}
-<noinclude></noinclude>
 <section begin="Body" />
 {{ansreq|page={{#titleparts:{{PAGENAME}}|2|1}}|num=1}}
 <noinclude></noinclude>
-<!-- 1. Use the following safety gear and know why it should be worn when skateboarding: helmet, elbow pads, knee pads, high top boots, wrist support gloves.  -->
+<!-- 1. Utilizar el siguiente equipo de seguridad y saber por qué debe usarse para el patinaje: casco, coderas, rodilleras, botas altas, guantes con apoyo para la muñeca. -->
 ;Casco
@@ Line 29: / Line 15: @@
 {{ansreq|page={{#titleparts:{{PAGENAME}}|2|1}}|num=2}}
 <noinclude></noinclude>
-<!-- 2. Name all the parts of a skateboard.  -->
+<!-- 2. Nombrar todas las partes de una patineta. -->
-Descriptions of the following skateboard parts are the ones most prevalent in popular, modern forms of skateboarding. Many niche disciplines exist with exotic or alternative constructions and designs that fall outside of much of the descriptions listed.
 {{clear}}
@@ Line 44: / Line 29: @@
 {{clear}}
-===Hardware===
+{{clear}}
-Mounting hardware is a set of eight 10-32 bolts, usually an allen or cross head, and matching self-lock nylock nuts. They are used to attach the trucks to the board. Some have a different colored bolt to show which side is the nose of the skateboard.
-===Optional components===
+{{clear}}
-====Rails====
-Narrow strips of plastic that are fastened under the deck lengthwise along the edges. They are used for additional grip for grabs, and to enhance sliding while protecting the deck's graphics at the same time. These are seldom used in modern skateboarding.
-====Slip Tape====
+{{clear}}
-Slip tape is a clear piece of self adhesive plastic that sticks to the underside of a deck. It helps protect the board's graphics and can allow the board to slide better. These are becoming more popular in modern skateboarding.
-====Lapper====
+{{clear}}
-A lapper is a plastic cover that is fastened to the rear truck and serves to protect the kingpin when grinding. It also prevents hang-ups by providing a smoother transition for the truck when it hits an obstacle or a metal pipe or bar used to grind.These are non-existent in modern skateboarding.
-====Nose guard====
+{{clear}}
-A plastic bumper used to protect the tip of a skateboard. These are rare in modern skateboarding.
-====Tail guard====
+{{clear}}
-A tail guard is a plastic skid plate used to prevent wearing of the tail; they can also be used as a means to stop the board. The tail guard is not commonly used in skateboards today.
-====Risers====
+{{clear}}
-Riser or riser pads are made of plastic or rubber and go between the truck and the board to provide additional clearance for the wheels to prevent wheel-bite (when the truck turns to a degree where the wheel will contact with the deck and stop spinning). They usually range in height from 3mm to 12mm. Shock pads are a variation of risers that are usually made of rubber or neoprene. They absorb impact and reduce vibration, which in turn helps prevent hardware from loosening and they can also prevent pressure cracks from forming. Although they help to reduce the impact of the drop they also reduce the pop (Snapping on the tail of your skateboard to make it jump up.).
-====Angled risers====
+{{clear}}
-Angled riser, or 'wedges' are risers that alter the turning geometry of the truck they are bolted to. Thin side out results in more turn per board lean, thick side out results in less.
 <noinclude></noinclude>
@@ Line 72: / Line 49: @@
 {{ansreq|page={{#titleparts:{{PAGENAME}}|2|1}}|num=3}}
 <noinclude></noinclude>
-<!-- 3. Completely disassemble and reassemble a skateboard, repacking the bearings and setting wheelnuts and truck pivoting nut at correct tension.  -->
+<!-- 3. Desmontar completamente y volver a ensamblar una patineta, re-ensamblando los cojinetes y colocando las tuercas y las tuercas pivotantes en la tensión correcta. -->
 <noinclude></noinclude>
 {{CloseReq}} <!-- 3 -->
 {{ansreq|page={{#titleparts:{{PAGENAME}}|2|1}}|num=4}}
 <noinclude></noinclude>
-<!-- 4. Demonstrate eight skateboarding skills which will include some of the following and do them to the instructors satisfaction on authorized property. Five of these should be demonstrated on a skateboarding ramp.  -->
+<!-- 4. Demostrar ocho habilidades con la patineta que incluyan algunos de los siguientes trucos y hacerlos a la satisfacción de los instructores en propiedad autorizada. Cinco de éstos deben demostrarse en una rampa de patinaje. -->
 <noinclude></noinclude>
@@ Line 114: / Line 91: @@
 {{ansreq|page={{#titleparts:{{PAGENAME}}|2|1}}|num=4i}}
 <noinclude></noinclude>
-A kick flip is a flip that is done off the toes.
-Steps
+{{clear}}
-#Must get ollie down moving
-#Slide like ollie but flick out
-#Pop down like ollie
-#Board starts to spin, pick legs up
-#Land and roll away
-#That's [http://www.howto-kickflip.com how to kickflip]
 <noinclude></noinclude>
@@ Line 141: / Line 111: @@
 <noinclude></noinclude>
-==** Note:The Skateboarding honor is not available in the North American Division because of insurance regulations.==
+==**Nota: la especialidad de patineta no está disponible en la División Norteamericana por regulaciones del seguro.==
 <noinclude></noinclude>
@@ Line 147: / Line 117: @@
 {{CloseReq}} <!-- 4 -->
 <noinclude></noinclude>
-==References==
+==Referencias==
 <noinclude></noinclude>
-[[Category:Adventist Youth Honors Answer Book|{{SUBPAGENAME}}]]
+{{CloseHonorPage}}
-<section end="Body" />

Patineta
Actividades recreacionales

Nivel de destreza 123
Autoridad de aprobación Asociación General	Año de introducción 1986