Difference between revisions of "AY Honors/Woodworking Tools/Rasp"

From Pathfinder Wiki
(added a wiki-internal link)
 
Line 1: Line 1:
[[Image:Wood rasp.jpg|thumb|right|250px|Wood rasp]]
 
A '''rasp''' is a [[woodworking]] tool used for shaping wood. It consists of a point or the tip then a long steel bar or the belly then the heel or bottom then the tang. The tang is joined to a handle usually plastic or wood. The bar has had sharp teeth cut into it. Rasps generally cut more coarsely than [[File (tool)|files]]. They are useful for rapidly removing wood from curved surfaces. They remove less wood than a [[drawknife]], so they are easier to control. Even though rasps leave very coarse finishes, the cut-away areas can be easily smoothed with finer tools, such as files.
 
  
There are several types and shapes of rasps. Firstly the shapes:
 
There is a half round, round and flat. The several types of rasps are bastard, cabinet and wood (finest to coursest). All these varieties can be used to make different shapes.
 
 
A similar tool to a rasp is a '''surform file'''; it has coarse, individual teeth like a rasp for cutting wood. The difference being that the surform has a small hole near each of the teeth to allow shavings to pass through and prevent clogging. Surform tools come in different styles and shapes including file-plane, round file and shaping/shaving tools. 
 
 
According to: New Expanded Webster's Dictionary 1991 Edition Published by P.S.I. & Associates, Inc Miami, FL
 
 
The Definition for "Rasp" is as Follows:
 
 
"Rasp, vt. To rub with something rough; to grate; to utter harshly.-vi. To rub or grate.-n. A caorse file; a raspberry."
 
 
'''RASP''' can also be an acronym for "[[Random access stored program machine]]" (Calvin C. Elgot & Abraham Robinson, 1964), a model that is similar to a [[register machine]].
 
 
{{tool-stub}}
 
 
[[Category:Mechanical hand tools]]
 
[[Category:Woodworking hand tools]]
 
 
[[fr:Lime (usinage)]]
 
[[pl:Tarnik]]
 
[[sv:Rasp]]
 

Revision as of 02:34, 3 November 2006