Difference between revisions of "AY Honors/Prayer - Advanced/Requirements"
Jomegat bot (talk | contribs) (Bot: Automated import of articles) |
Jomegat bot (talk | contribs) m (Add RequirementsHeader) |
||
| Line 1: | Line 1: | ||
| − | + | Heat the wax to your desired temperature. You can use your finger to make a hole in the bottom of the sand stick the wick in and cover it or you can stick the wick in after the first pour. Use an ice pick or stick to make a small indentation in the bottom of the poured candle and fit the wick into that hole. If you need to, stabilize the wick with a wick bar, straw, stick. Using the tablespoon to deflect the wax, slowly pour the wax into the hole. The spoon helps the hot wax disperse better without causing the hole to cave in. Depending on how wet your sand is you will likely hear a sizzling! This is just the water being evaporated out by the wax. You will notice that the wax begins to seep into the side of the hole. Fill the hole and let it seep. We'll come back and do a second pour when the wax cools down in a bit. After the second pouring and the free form is filled your sand candle is now ready. | |
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
Revision as of 01:23, 24 November 2020
Heat the wax to your desired temperature. You can use your finger to make a hole in the bottom of the sand stick the wick in and cover it or you can stick the wick in after the first pour. Use an ice pick or stick to make a small indentation in the bottom of the poured candle and fit the wick into that hole. If you need to, stabilize the wick with a wick bar, straw, stick. Using the tablespoon to deflect the wax, slowly pour the wax into the hole. The spoon helps the hot wax disperse better without causing the hole to cave in. Depending on how wet your sand is you will likely hear a sizzling! This is just the water being evaporated out by the wax. You will notice that the wax begins to seep into the side of the hole. Fill the hole and let it seep. We'll come back and do a second pour when the wax cools down in a bit. After the second pouring and the free form is filled your sand candle is now ready.
