Especialidades JA/Tejido en malla plástica/Respuestas

From Pathfinder Wiki
< AY Honors‎ | Plastic CanvasAY Honors/Plastic Canvas/Answer Key/es /
Revision as of 21:48, 5 May 2021 by W126jep (talk | contribs) (Created page with "Especialidades JA/Tejido en malla plástica/Respuestas")
Other languages:
English • ‎español
Tejido en malla plástica

Nivel de destreza

1

Año

2006

Version

16.11.2024

Autoridad de aprobación

Asociación General

Plastic Canvas AY Honor.png
Tejido en malla plástica
Artes y actividades manuales
Nivel de destreza
123
Autoridad de aprobación
Asociación General
Año de introducción
2006
Vea también


1

¿Qué es una malla de plástico para tejido?


Tren hecho de malla plástica


2

Nombrar cuatro clases de malla de plástico y dar una breve descripción de cada una.

On the project pattern you will find that the plastic canvas grid is either counted out by using the terms lines or threads or by holes or squares. You can find the following four sizes:

  • 5 holes to the inch
  • 7 holes to the inch
  • 10 holes to the inch
  • 14 holes to the inch


3

¿Qué clase de estambre es mejor para usar en la malla de plástico?

The best type of yarn to use is regular worsted weight yarn. It is inexpensive, comes in many colors, and is widely available.


4

Describir las siguientes clases de estambre y mencionar en qué clase de tela (malla) funcionan mejor.


4a

Estambre de peso Worsted



4b

Estambre de peso deportivo



4c

Estambre de tapicería



4d

Lana persa



4e

Algodón perlado

Pearl cotton, Perle cotton, or French cotton perlé is an S-twisted, 2-ply thread with high sheen, sold in three sizes or weights (No. 3, 5, and 8, with 3 being the heaviest).

4f

Hilo de seda

Embroidery floss or stranded cotton is a loosely twisted, slightly glossy 6-strand thread, usually of cotton but also manufactured in silk and rayon. Cotton floss is the standard thread for cross-stitch. Extremely shiny rayon floss is characteristic of Brazilian embroidery.

Use in 14 point canvas.


5

¿Qué clase de aguja utiliza en la malla de plástico? ¿Qué tamaño de aguja se utiliza en cada clase de malla de plástico?

Various manufacturers make Metal Plastic Canvas Needles, also called tapestry needles. You need needles that have a large eye for the yarn and they do not need to be sharp. Most plastic canvas needles are quite short.

7pt plastic canvas takes a #16 metal tapestry needle. 10pt takes a #18 needle

6

¿Qué instrumentos se utiliza para el corte de la malla de plástico? ¿Cómo se corta la malla de plástico?

First you need a good cutting board (paper cutter), something most schools have, for the straight lines. A pair of sturdy scissors is useful for shorter segments and around circles.

7

Nombrar por lo menos 10 puntos y hacer una muestra de una pulgada (2.5 cm) de cada una.

Template:Adventist Youth Honors Answer Book/Problematic requirement This requirement is an excellent opportunity for the Pathfinders new to Plastic Canvas to learn and practice a variety of stitches and prepare the Pathfinders for the other practical projects in the honor. Other needlepoint type honors use similar stitches, so the skills are very transferable.

The requirement says "one-inch sample" which if interpreted as a single row is between 2 and 7 individual stitches in 7 point canvas. This is not an adequate number of stitches to learn any stitch and does not cover how to connect the rows of stitches side by side or how to transition to the next row. Instead, we interpret the requirement (and strongly recommend) that a sample 1 inch by 1 inch square of each stitch (except as noted) be prepared by each Pathfinder in the form of a sample canvas. The finished sample canvas will give them a quick reference guide to keep with their plastic canvas kit. The one inch square or length is actually a good rule to enforce as it trains the Pathfinder to count stitches on the project, another important skill.

After some testing, we suggest this procedure:

  1. Prepare strips of 7 point canvas that are are ideally at least 12 inches long and 2 inches wide. We found canvas sheets that are a little larger then a letter size sheet of paper (10.5 inch/26.7 cm x 13.5 inch/34.2 cm) that can be cut the long way.
  2. Each Pathfinder should create a sample canvas of a 1 inch square block of each of the listed stitches working to the edge of the canvas
  3. Add samples of the edge stitches (where one inch samples will do).
  4. Add labels (stickers or stitched) below each stitch sample.

A good resource showing all these stitches complete with videos and diagrams.

Tent Stitch

Basketweave tent stitch
Continental tent stitch
Half cross tent stitch

Tent stitch is a small, diagonal embroidery stitch that crosses over the intersection of one horizontal and one vertical thread of needlepoint canvas forming a slanted stitch at a 45 degree angle. It is also known as Petit point and Needlepoint stitch and is one of the most basic and versatile stitches used in needlepoint and other canvas work embroidery.

Tent stitch variants

There are three types of tent stitch, all producing the same appearance on the front of the canvas but each worked in a slightly different way and having particular characteristics, uses, benefits and drawbacks. These variants of tent stitch are known as basketweave, continental and half cross tent stitches:

  • Basketweave tent stitch
    The basketweave form of tent stitch is worked in diagonal rows up and down the canvas. The yarn on the back of the canvas has a typical basketweave appearance, with alternating horizontal and vertical stitches. Basketweave is the best stitch to use for covering large areas of canvas as it does not distort the canvas as the other two forms of tent stitch do.
  • Continental tent stitch
    Continental stitch is worked from right to left across the canvas. It's primary use is for working a single row of stitching but may be worked in multiple rows if necessary. It can also be used for stitching vertical lines. It is normally used for working a single line or for filling very small areas because of the tendency of the stitch tension to pull and distort the canvas ground fabric out of shape. This method uses more yarn than half cross stitch tent stitch but is more hardwearing.
  • Half cross tent stitch
    Half cross stitch is worked from left to right across the canvas. As with Continental tent stitch it's primary use is for working a single row of stitching but may be worked in multiple rows if necessary. It can also be used for stitching vertical lines. It is normally used for working a single line or for filling very small areas because of the tendency of the stitch tension to pull and distort the canvas ground fabric out of shape. This method uses less yarn than other stitches but is not very durable as coverage on the back of the canvas is a little thin.


Bargello Technique

Bargello refers not just a stitching technique, but motifs created by the change of colors in the stitches. This section describes the vertical stitch and how it is combined with color and ‘stepping’ to create different motifs.

Examples

Image(s) created and licensed by Elizabeth Pyatt.

Vertical Stitches

Most agree that traditional Bargello pieces incorporate a series of all vertical stitches (vs. diagonal stitches). The basic unit is usually a vertical stitch of four threads, but other heights are possible.

Some Bargello pieces use only one height of stitch, but even the earliest pieces (such as chairs in the Bargello museum) combined different heights of stitches.

Stepping

Bargello patterns are formed when vertical stitches are stepped or offset vertically, usually by two threads (i.e. halfway down a unit of four threads). The patterns in the steps combined with color changes determines how the overall pattern will emerge.

Flame (Sharp) vs. Curved Motifs

If vertical stitches are stepped down quickly, the design forms sharp points or zig-zags. This type of Bargello motif is often known as "flame stitch." Flame stitch can be found on the Bargello Museum chairs.

If steps are gradual, then the design will appear to be curved. Traditional curved Bargello motifs include medallions and ribbons.

8

Hacer dos de los siguientes artículos utilizando tres diferentes puntadas.

These are all single or double sided, mostly one dimensional objects with a design of some sort. Any of these would make a good starter project. You can cut out of plastic mat or you can buy a precut kit, often in an interesting shape. Search online for stitching patterns, look in the library for pattern books or follow the directions that came with your kit. However, feel free to be creative and personalize your project with alternate colors or other modifications for after all it is your creation.

8a

Portavasos


8b

Marca libros


8c

Marco para fotos


8d

Imán para el refrigerador


8e

Adorno navideño


8f

Adorno para le puerta


9

Hacer uno de los siguientes artículos utilizando cuatro diferentes puntadas.

These are all three dimensional boxes of some sort. They allow the Pathfinder to learn to attach panels together and explore three dimensions.

9a

Cubierta para caja de servilletas

This project is a simple four sided box, with a top with a hole for tissues and the bottom open. The sides and top represent places for the Pathfinder to follow interesting patterns or create their own design on.

9b

Bolso grande

This should have a bottom and sides, basically the same as a box with some handles cut in the sides. Totebag kits can be purchased or follow a pattern.

9c

Carpeta para los discos de computadoras

Most Pathfinders will not know what a floppy disk is, and sure do not need one for they were born well after floppy disks became obsolete. Floppies were removable computer storage media. A similar, and not quite obsolete item might be a business card holder or a small box to store store loyalty cards in. Basically a little box to put something rectangular in.

9d

Ornamento pequeño u otros artículos

A box with a bottom, and perhaps a lid. Again, a three dimensional box.


References