AY Honors/Knot/Whipping

Common whipping

Use: The common whipping is the simplest type of whipping knot, a series of knots intended to stop a rope from unraveling. As it can slip off of the rope easily, the common whipping should not be used for rope ends that will be handled. This whipping knot is also called 'wolf' whipping in some parts of the world. The benefit of a common whipping is that no tools are necessary and the rope does not need to be unlayered. The problem is that it will slide off the end of the rope with little provocation. Other whippings avoid this by interweaving the whipping with the strands of the rope and creating friction with the strands to avoid slipping. Normally a natural fiber rope is whipped with twine. The size of the rope dictates the size of the twine. Any twine can be used, but tarred two strand hemp (marline) is preferred. Artificial-fiber ropes should have their ends fused by heat rather than whipped to prevent unraveling. How to tie: The rope should be whipped a short distance (One and a half times the diameter) from its end. Lay the head of the twine along the rope, make a bight back along the rope Begin wrapping the twine around the rope and bight of twine securely. Wrap until the whipping is one and a half times wider than the rope is thick. Slip the working end of the twine through the bight. Cut the twine flush with the edges of the whipping and the rope end not less than half its width from the whipping to give the rope end a finished look