Requisitos para la especialidad JA de Derbi de automodelos de pino
Nivel de destreza
1
Año
1999
Version
13.11.2025
Autoridad de aprobación
Asociación General
1. Nombrar los cuatro componentes básicos de un automodelo de pino de carrera.
2. Los automodelos de pino deberán cumplir los siguientes requisitos básicos:
- a.
Must be made during the current calendar year or Pathfinder club year.
- b.
Width of car shall not exceed 2 3/4” or 70 mm
- c.
Length of car shall not exceed 7” or 178 mm
- d.
Weight of car shall not exceed 5 oz. (142 grams)
- e.
Width between wheels shall be 1 3/4” or 44 mm
- f.
Height from bottom of car to bottom of tires shall be 3/8” minimim or 10 mm
- g.
Use only axles, wheels, and wood provided in the kit you purchase.
- h.
Wheel bearings, washers, and bushings are prohibited.
3.
Know how to use safely the following while building your project:
- a.
Saw
- b.
Wood rasp
- c.
Coarse sandpaper
- d.
Fine sandpaper
- e.
Wood plane
- f.
Hammer
- g.
Shaping stick
4.
Know the basic steps in designing a car:
- a.
Design
- b.
Transfer of design
- c.
Building the car
- d.
Axles and wheels
- e.
Adding weight
- f.
Lubrication
5.
Design and build to completion a Pinewood Derby car from a basic kit using the instructions in the kit or if no instructions, follow the directions in #2.
6.
Participate in a sponsored Pinewood Derby event using the car you built in #5.
