AY Honors/Knot/Man harness

From Pathfinder Wiki
< AY HonorsAY Honors/Knot/Man harness/en
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
Man harness knot
ArtilleryLoop FinalKnot.jpg
ArtilleryLoop HowTo.jpg

Use: The Man harness is a knot with a loop on the bight for non-critical purposes. This knot is used when multiple people are to pull a load. Typically one end of the rope is tied to a load, and one man harness knot per puller will be tied along its length. Each loop is then pulled by a different person.

How to tie:

  1. Lay the rope flat
  2. Make a loop in the rope with the running end going beneath the standing part.
  3. Pull the running end down so that it crosses over the loop.
  4. Pull the bottom of the loop through the gap between the top of the loop and the running end.

WARNING: The Man harness knot must have the loop loaded or it will slip and contract easily.