AY Honors/Knot/Sheetbend

From Pathfinder Wiki
< AY HonorsAY Honors/Knot/Sheetbend/en /
Revision as of 03:41, 27 July 2022 by FuzzyBot (talk | contribs) (Updating to match new version of source page)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Sheetbend
Schotstek1.png

Use: The sheet bend knot is excellent for joining two ropes together, especially if the two ropes are not the same size. When tied properly, it will not come undone, and it is easy to untie. It is very similar to the bowline.

How to tie:

  1. Make a bight at the end of the larger rope (if they are not the same size).
  2. Run the end of the smaller rope through the bight, entering from the bottom.
  3. Wrap the end of small rope around the back of the large rope, crossing the short end of the large rope first.
  4. Tuck the end of the short rope under itself, on top of the bight.