AY Honors/Knot/Timber hitch

From Pathfinder Wiki
< AY Honors
Revision as of 03:59, 6 November 2014 by Jomegat (talk | contribs) (Marked this version for translation)
Timber hitch
Timber Hitch Final.jpg
Timber Hitch HowTo.jpg

Use: The timber hitch is a knot used to attach a single length of rope to a piece of wood. This knot is easily undone after use.

How to tie:

  1. To make the knot, pass the rope completely around the wood.
  2. Pass the running end around the standing part, then through the loop that you have just formed.
  3. Make three turns around the loop then pull on the standing part to tighten.
  4. Take care that you double the rope back on itself before making the three turns, or it won't hold.
  5. Three are recommended for natural rope such as jute, whereas five turns are needed on synthetic rope like nylon.
This knot is also known as the Bowyer's Knot as it is used to attach the lower end of the bowstring to the bottom limb on an English Longbow.