AY Honor Pinewood Derby Requirements

From Pathfinder Wiki
< AY Honors‎ | Pinewood DerbyAY Honors/Pinewood Derby/Requirements /
Revision as of 11:48, 22 July 2022 by W126jep (talk | contribs) (- Category of Honor Requirements)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Other languages:
English • ‎español
Pinewood Derby

Skill Level

1

Year

1999

Version

13.12.2024

Approval authority

General Conference

Pinewood Derby AY Honor.png
Pinewood Derby
Arts, Crafts and Hobbies
Skill Level
123
Approval authority
General Conference
Year of Introduction
1999
See also



1. Name the four basic components of a Pinewood Derby car.

2. Cars must meet the basic following requirements:

a. Must be made during the current calendar year or Pathfinder club year.

b. Width of car shall not exceed 2 3/4” or 70 mm

c. Length of car shall not exceed 7” or 178 mm

d. Weight of car shall not exceed 5 oz. (142 grams)

e. Width between wheels shall be 1 3/4” or 44 mm

f. Height from bottom of car to bottom of tires shall be 3/8” minimim or 10 mm

g. Use only axles, wheels, and wood provided in the kit you purchase.

h. Wheel bearings, washers, and bushings are prohibited.

3. Know how to use safely the following while building your project:

a. Saw

b. Wood rasp

c. Coarse sandpaper

d. Fine sandpaper

e. Wood plane

f. Hammer

g. Shaping stick

4. Know the basic steps in designing a car:

a. Design

b. Transfer of design

c. Building the car

d. Axles and wheels

e. Adding weight

f. Lubrication

5. Design and build to completion a Pinewood Derby car from a basic kit using the instructions in the kit or if no instructions, follow the directions in #2.


6. Participate in a sponsored Pinewood Derby event using the car you built in #5.