Difference between revisions of "AY Honors/Welding"
From Pathfinder Wiki
< AY HonorsAY Honors/Welding
Jomegat bot (talk | contribs) (Bot: Automated import of articles *** existing text overwritten ***) |
Jomegat bot (talk | contribs) (Bot: Automated import of articles *** existing text overwritten ***) |
||
Line 1: | Line 1: | ||
− | |||
{{HonorLanding | {{HonorLanding | ||
− | |||
|skill=3 | |skill=3 | ||
|year=1978 | |year=1978 | ||
Line 9: | Line 7: | ||
|instructor=qualified | |instructor=qualified | ||
|overview= | |overview= | ||
− | }} | + | }} |
== {{Localize|Overview}}== | == {{Localize|Overview}}== |
Revision as of 03:51, 25 March 2021
Overview
The Challenging Part
The most challenging requirement of this honor is probably this:
11. Using the designated processes, perform the following:
- a. PAC: Make one straight cut at least three inches long in mild steel or aluminum.
- b. SMAW: Complete i and ii, or complete iii.
- i. Make two bead-on-plate welds at least two inches total length
- ii. Make one square-groove weld in the flat position
- iii. Make one corner weld in the flat position
- c. GMAW: Complete i and ii, or complete iii.
- i. Make two bead-on-plate welds at least two inches total length
- ii. Make one square-groove weld in the flat position
- iii. Make one lap weld in the flat position