Translations:AY Honors/Welding/Answer Key/48/en
From Pathfinder Wiki
- You must be trained and authorized before using the oxy-acetylene torch
- Make sure you do not have a lighter in your pocket – they can explode!
- Ensure gas bottles are upright and secure at all times
- Do not allow oil or grease to come in contact with hoses or equipment
- Perform all welding and cutting in the welding area – ventilation must be turned on
- Approved goggles and spark resistant clothing must be worn when using the oxy-acetylene torch
- Do not weld or cut a closed container
- Make sure the work area is clear
- Open the cylinder valves slowly – stand to the side!
- Light the torch with the striker – do not use a match or a lighter
- When welding, bend the end of the rod to identify the hot end and to prevent eye injury
- When finished turn off the torch valves, turn off cylinder valves, then go back to the torch and bleed both lines
- Keep the cylinder caps on when not in use