Difference between revisions of "AY Honors/Knot/Double sheet bend"

From Pathfinder Wiki
(+trans)
(Marked this version for translation)
Line 1: Line 1:
<noinclude><translate></noinclude>
+
<noinclude><translate><!--T:1-->
 +
</noinclude>
 
{{Knot
 
{{Knot
 
| name=Double sheet bend
 
| name=Double sheet bend

Revision as of 03:46, 6 November 2014

Double sheet bend
Double sheet bend.jpg

Use: The double sheet bend or double becket bend is a strong knot used to tie two ropes (usually of different thicknesses or rigidity) together. It is a doubled version of the sheet bend.

How to tie:

To tie the double sheet bend, start by making a bight in the larger line. Pass the working end of the smaller line up through the bight, around behind the bight, and beneath the loop in the smaller line (that's a sheet bend). Then once again, pass the working end along the same path, around behind the bight and beneath the loop in the smaller line.

WARNING: As with the standard sheet bend, the two free ends should end up on the same side of the knot. If they do not, a left-handed double sheet bend results, which is much weaker.