Difference between revisions of "Investiture Achievement/Companion/Outdoor Living"

From Pathfinder Wiki
(AYHAB->AY)
 
(11 intermediate revisions by 4 users not shown)
Line 1: Line 1:
 +
<languages /><br />
 +
<noinclude><translate><!--T:1-->
 +
</noinclude>
 
__NOTOC__
 
__NOTOC__
=Standard Level [[File:Strip invest companion.jpg]]=
+
{{IA desc
 +
|class=Companion
 +
|pagename=Companion/Outdoor Living
 +
|stage=100%
 +
}}
 
{{/requirement 1}}
 
{{/requirement 1}}
There are many more than 20 knots listed in the [[Adventist Youth Honors Answer Book/Recreation/Knot Tying|Knot Tying]] Honor answers, and the Companion candidate is free to tie any twenty of them. 
+
{{IA/Effective Knot Teaching}}
  
{{IA/Effective Knot Teaching}}
+
<!--T:2-->
 +
There are many more than 20 knots listed in the {{honor_prerequisite|honor=Knot Tying|linkonly=true}} Honor answers, and the Companion candidate is free to tie any twenty of them.
  
 +
<!--T:3-->
 
Assuming that the Companion has already tied the ten knots listed under the [[../../Friend/Outdoor Living|Friend - Outdoor Living]] section, here are ten more.
 
Assuming that the Companion has already tied the ten knots listed under the [[../../Friend/Outdoor Living|Friend - Outdoor Living]] section, here are ten more.
  
 +
<!--T:4-->
 
# Constrictor knot - great for making a rope ladder
 
# Constrictor knot - great for making a rope ladder
 
# Cat's Paw - good for tying onto a horizontal bar
 
# Cat's Paw - good for tying onto a horizontal bar
Line 19: Line 29:
 
# Two Half Hitches - useful for tying to a pole
 
# Two Half Hitches - useful for tying to a pole
  
 +
<!--T:5-->
 
And here are the knots
 
And here are the knots
{{:Adventist Youth Honors Answer Book/Knot/Constrictor}}
+
{{:AY Honors/Knot/Constrictor}}
{{:Adventist Youth Honors Answer Book/Knot/Cat's paw}}
+
{{:AY Honors/Knot/Cat's paw}}
{{:Adventist Youth Honors Answer Book/Knot/Timber hitch}}
+
{{:AY Honors/Knot/Timber hitch}}
{{:Adventist Youth Honors Answer Book/Knot/Pipe hitch}}
+
{{:AY Honors/Knot/Pipe hitch}}
{{:Adventist Youth Honors Answer Book/Knot/Fisherman's bend}}
+
{{:AY Honors/Knot/Fisherman's bend}}
{{:Adventist Youth Honors Answer Book/Knot/Alpine butterfly}}
+
{{:AY Honors/Knot/Alpine butterfly}}
{{:Adventist Youth Honors Answer Book/Knot/Prusik}}
+
{{:AY Honors/Knot/Prusik}}
{{:Adventist Youth Honors Answer Book/Knot/Double bowline}}
+
{{:AY Honors/Knot/Double bowline}}
{{:Adventist Youth Honors Answer Book/Knot/Bowline on a bight}}
+
{{:AY Honors/Knot/Bowline on a bight}}
{{:Adventist Youth Honors Answer Book/Knot/Two_half_hitches}}
+
{{:AY Honors/Knot/Two_half_hitches}}
 
{{clear}}
 
{{clear}}
  
== ==
+
== == <!--T:6-->
 
{{/requirement 2}}
 
{{/requirement 2}}
  
=Trail Companion [[File:Companion Ribbon.jpeg|150px]]=
+
<!--T:7-->
There are no additional requirements in the Outdoor Living section for the Trail Companion class.
+
{{honor_prerequisite|honor=Camping Skills II}}
 +
 
 +
=Trail Companion [[File:Companion Ribbon.jpeg|150px]]= <!--T:8-->
 +
{{:Investiture Achievement/noadvanced}}
 +
<noinclude></translate></noinclude>

Latest revision as of 15:33, 31 October 2021

Other languages:
English • ‎español




IA logo.png
Strip invest companion.jpg
Companion/Outdoor Living



Requirement 1

Tie and know the practical use of 20 knots.



Knot tying is an important part of Pathfindering with tie ins to Investiture Achievement and many other honors such as the various Camping Honors, Rock Climbing, Pioneering and others.

An effective way to teach knots in a club setting is to have the staff and the older Pathfinders (the ones who already have the Knot Tying Honor) each teach a single knot at a knot tying station. The Pathfinders who are learning the knots will rotate through the stations. After a set time, ring a bell to signal that it's time to rotate, and do not allow the students to rotate until the bell rings (otherwise, they will all gravitate to the same table).

Using this approach, each of the teachers need only learn a single knot well enough to teach it, and the students will have a chance to receive one-on-one instruction for every knot. Allow at least seven or eight minutes per station. You can do this over more than one meeting if necessary, and you can involve the entire club at once rather than only a single unit.

Prior to the meeting, the rope may be cut to the proper length. Some instructors consider cutting rope during a meeting a waste of valuable teaching time, while others use it as an opportunity to teach proper binding of the rope. To prevent the cut rope from unravelling, wrap a small piece of duct tape around it before you make the cut - then cut the tape in half. This will save time, as it binds both ends of the cut in one shot.

The length of each rope should be suited to the knot it will be used for. Note that a figure eight knot does not require as much rope as a timber hitch, and that it is impossible to tie a knot on a rope that it too short to hold it. Conversely, using too much rope for small knots is a waste of good rope (and money!). Remember that the amount of rope wasted on each knot will be multiplied by the number of students.

A good way to determine proper rope length is to tie the desired knot using a long piece of rope, cut it, and then untie it. That's how long it needs to be. Cut as many of that length as you will have students, put them in a plastic baggie, and label the bag. You may have the knot instructors cut their own ropes, or you may have a squad of TLT's do this. Or you could do it yourself (but that would be depriving your TLT's and/or instructors of a valuable experience).

Two knot tying stations can easily share an eight foot table and a hot-melt glue gun - assuming the students will be mounting the knots on a board as they tie them. If you are organized and have the space, you can store their knot boards from year to year and let them add to it each year. By the time they are in the Ranger class, they will appreciate not having to tie 25 knots all at once.

A good knot board can be made from a length of lumber - 24"x12"x3/4" makes a good sized board if you are using quarter-inch diameter rope. A stick can be fastened along the edge of the board to make a convenient place to tie the hitches.

For a professional-looking knot board, prepare labels for the knots using a label maker. Again, this is something that should be done prior to the meeting, as making labels and distributing them is not an effective use of instruction time. You should also make labels with each student's name (or have students label their boards neatly) so that they will be able to find their knot boards in the future and to prevent disputes over knot board ownership. You might also consider labeling the knot boards before they are given to the students (and before the knots are tied), as this makes it easy to figure out which knots the student still needs to learn.


There are many more than 20 knots listed in the Knot Tying Honor answers, and the Companion candidate is free to tie any twenty of them.

Assuming that the Companion has already tied the ten knots listed under the Friend - Outdoor Living section, here are ten more.

  1. Constrictor knot - great for making a rope ladder
  2. Cat's Paw - good for tying onto a horizontal bar
  3. Timber Hitch - another good way to start a lashing.
  4. Pipe Hitch - good for lifting pipes (or poles) into the air (or lowering them)
  5. Fisherman's Bend - good for joining two ropes.
  6. Alpine Butterfly - good for climbing.
  7. Prusik - another climbing knot
  8. Double bowline - a bowline with two loops.
  9. Bowline on a Bight - a two-looped bowline tied in the middle of a rope
  10. Two Half Hitches - useful for tying to a pole

And here are the knots

Constrictor Knot
Constrictor-ABOK-1249.jpg

Use: The Constrictor knot is one of the most effective binding knots. Simple and secure, it is a harsh knot which can be difficult or impossible to untie once tightened. It is made similarly to a clove hitch but with one end passed under the other, forming an overhand knot under a riding turn. Because this knot will not slip when tied around a stick, it is an excellent knot for making a rope ladder.

How to tie:

  1. Make a turn around the object and bring the working end back over the standing part.
  2. Continue around behind the object.
  3. Pass the working end over the standing part and then under the riding turn and standing part, forming an overhand knot under a riding turn.
  4. Be sure the ends emerge between the two turns as shown. Pull firmly on the ends to tighten.

WARNING: The Constrictor knot's severe bite, which makes it so effective, can damage or disfigure items it is tied around.


Cat's paw
Catspawknot.png

Use: The Cat's paw is used for connecting a rope to an object.
  • Attaching a rope to a hook (or to a post or rail where the load is perpendicular to the post) with more security than a simple girth hitch.
  • Joining an eye to a ring.
  • Strongly joining eyes in the ends of two lines, where there is access to the end of at least one line.

How to tie:

Method 1

Form a bight in the middle of the line, and pull it back over itself like a girth hitch. This forms two loops, turned in opposite directions. Give each loop one more full turn in the direction that will tend to tighten it (the wrong direction will undo the loop completely). Pass both loops over the hook, rail or post and pull tight, taking care to push the bight up snugly against the turns.

Method 2

If working end of the line has an eye in it, and the standing end is accessible, the knot can be tied to a closed ring, another eye, or a rail with inaccessible ends, as follows. Pass the eye around the ring or rail, then pass the standing end through its own eye (this effectively forms a girth hitch). Then pass the standing end through the eye again, and pull up tight, taking care to push the bight up snugly against the turns.

When using the cat's paw to join two eyes, this process may be repeated several times to give several turns - as many as five in a fine fishing monofilament. Then when tightened, instead of pulling the bight up against the turns, both eyes are pulled equally, to make neat coils of turns in both eyes, meeting halfway between them.


Timber hitch
Timber Hitch Final.jpg
Timber Hitch HowTo.jpg

Use: The timber hitch is a knot used to attach a single length of rope to a piece of wood. This knot is easily undone after use.

How to tie:

  1. To make the knot, pass the rope completely around the wood.
  2. Pass the running end around the standing part, then through the loop that you have just formed.
  3. Make three turns around the loop then pull on the standing part to tighten.
  4. Take care that you double the rope back on itself before making the three turns, or it won't hold.
  5. Three are recommended for natural rope such as jute, whereas five turns are needed on synthetic rope like nylon.
This knot is also known as the Bowyer's Knot as it is used to attach the lower end of the bowstring to the bottom limb on an English Longbow.


Pipe hitch
Pipe hitch2.jpg

Use: The pipe hitch is used for hoisting tubular objects (such as pipes).

How to tie:

  1. Make four or five turns around the pipe with the rope.
  2. Bring the running end back to the standing part.
  3. Tie two half-hitches around the standing part.


Fisherman's knot
Noeud de pécheur déserré.jpg

Use: The Fisherman's knot is a specialized bend. It consists of two overhand knots wrapped around each other. It works well for joining thin, stiff, or slippery lines. It requires little dexterity to tie, so is often used in stubborn materials. When tightened, it becomes fairly compact, and the free ends can be cropped very close to the knot. These qualities make it very useful for fishing line--it is less likely to jam a fishing rod than many other bends, and is easier to tie with cold, wet hands.

How to tie:

To tie the fisherman's knot, lay the two ends to be tied alongside each other and facing opposite ways. Tie an overhand knot on the first rope and pass the second rope through the loop formed. Tighten the overhand knot, to prevent the line inside it from flopping around. Then tie another overhand knot on the second rope with the first rope passing through it.


Alpine butterfly
Alpine butterfly on the bight howto.jpg
Alpine butterfly loop.jpg

Use: The Butterfly Loop has a high breaking strength and is regarded by mountaineers as one of the strongest knots to attach climbers to the middle of a rope, such that they have room to move around even when the main rope goes tight, and they can be supported in either direction from the main rope. The loop is typically attached to a climbing harness by carabiner. It can also be used to isolate a worn section of rope, where the knot is tied such that the worn section is used for the center of the loop.



Prusik knot
Prusikhowto4.jpeg

Use: A Prusik (aka Prussik or Prussic) is a friction hitch used in climbing, canyoneering, caving, rope rescue and by arborists to grab a rope (sometimes referred to as a rope-grab). The term Prusik is used both for the knot, for the loops of cord, and for the action (to prusik).

A Prusik rope is a circular loop with a circumference of 20 to 100 cm8-40 inches depending on its intended use. Two Prusik ropes are tied to another rope which is anchored above. When the Prusik knot is under tension, it grabs the rope to which it is tied. When not under tension, it is easily moved. The climber places one foot into each loop, and shifts all of his or her weight to one of them, releasing the tension on the other. The rope without tension is then slid upwards on the vertical rope. The climber then shifts his or her weight to the other loop and slides the first one up. This is repeated until the rope has been ascended. Prusiks will work around two ropes, even two ropes of different diameters. Prusiks provide a high-strength and relatively fail-safe (i.e., they will slip before damaging the rope or breaking) attachment, and are used in some rope-rescue techniques. Prusiks are good to use in hauling systems where multiple rope-grabs may be needed, and where mechanical rope-grabs are not available.

Although the Prusik Climb technique may be called old-school by some, the US Army still includes it in its annual Best Ranger competition. Rangers in the competition routinely make it up a 90 foot rope in under a minute.

How to tie:
The Prusik is tied by wrapping the prusik loop around the rope a number of times (depending on the materials, but usually 3-5 times), and then back through itself, forming a barrel around the rope, with a tail hanging out the middle. When the tail is weighted the turns tighten around the main rope and grab. When weight is removed the loop can be slid along the rope by placing a hand directly on the barrel and pushing. The trick is, if it grabs well, then it is hard to slide along the rope. Breaking the Prusik free from the rope after it has been weighted can be difficult, and is easiest done by pushing the bow, being the loop of cord which runs from the top wrap, over the knot to the bottom wrap, along the tail a little. This loosens the grip of the hitch and makes movement easier.



Double bowline
Nœud de calfat.jpg



How to tie:

  1. Make a loop with the running end crossing over the standing end.
  2. Make a larger loop that passes over the first loop, again with the running end passing over the standing end.
  3. Pass the running end through the first loop from the bottom.
  4. Wrap the running end behind the standing end, and back down through the first loop.
  5. Tighten


Bowline on a bight
Bowline-bight-animated.gif

Use: This makes a secure loop in the middle of a rope which does not slip.

How to tie:
A bight is the middle part of the rope (not the ends)

  1. In the middle of a rope, form a small loop.
  2. Thread the bight through the loop.
  3. Spread out the bight a little.
  4. Pass this down and around the whole knot.
  5. Continue until it come back to the neck where it started.
  6. Tighten the bight to complete the knot. Tighten carefully so that you don't get a kind of slip knot.


Two half hitches
Knot 2 half hitches.jpg

Use: This reliable knot is quickly tied and is the hitch most often used in mooring.

How to tie:

  1. Pass end of rope around post or other object.
  2. Wrap short end of rope under and over long part of rope, pushing the end down through the loop. This is a half hitch.
  3. Repeat on long rope below first half hitch and draw up tight.

Requirement 2

Earn the Camping Skills II Honor, if not previously earned.



For tips and instruction see Camping Skills II.

Trail Companion Companion Ribbon.jpeg

There are no additional requirements in this section for the Advanced Ribbon.