Difference between revisions of "AY Honors/Cycling - Advanced/Requirements 2"
m |
m (Jomegat moved page AY Honor Cycling - Advanced Requirements used by General Conference to AY Honor Cycling - Advanced Requirements used by North American Division without leaving a redirect: Part of translatable page "AY Honors/Cycling - Advanced/Requirements") |
(No difference)
|
Revision as of 03:43, 16 July 2021
Skill Level
2
Year
1976
Version
31.10.2024
Approval authority
North American Division
1. Have the Cycling honor.
2. Describe how to select the correct frame size, handlebar, and saddle height to fit one's body size.
3. Describe briefly all the desirable features of a bicycle used for long distance touring.
4. Take apart, clean, and reassemble the bearings in the front and rear wheels, head-set, and bottom brackets.
5. Explain and demonstrate the meaning of "BCD" as it relates to the crank.
6. Select the crank and rear sprocket combination that would give the best results under the following conditions:
- a. Riding in hilly terrain
- b. Touring with packs on the bicycle
- c. Riding in level country
7. Explain how the riding characteristics of a bicycle are affected by:
- a. The geometry of the bicycle frame including:
- i. Head and seat tube angles
- ii. Fork rake
- iii. Chain stay length
- iv. Bottom bracket height
- v. Wheel base length
- b. The kind of wheels used including:
- i. Clincher or tubular tires
- ii. Number of spokes used on each wheel
- iii. Number of spokes each spoke crosses
8. Make a list of desirable equipment items to be taken on a multi-day bicycle tour, including shelter and cooking equipment.
9. Review courtesy and safety rules used while bicycling. What are the rules for the road for cyclists in your local area?
10. What are the advantages of drafting? Know how to safely and properly draft.
11. Know the different clothing articles used in bicycling and the advantages of each.
12. List the maintenance checks needed prior to riding a 100-mile (160 km) tour, including items such as:
- a. Truing tires completed
- b. Cables are tightened
- c. New tubes and tires, pressures checked
- d. Chain lubrication
- e. Brake pad thickness checked
- f. Repair tool kit verified
13. Develop a plan that involves hydration and nutrition that you will use before, during, and after a ride.
14. Have the following riding record while working on this honor:
- a. Make three single-day 20-mile (32 km) rides in different locations.
- b. Complete either a 75-mile (120 km) one-day bicycle trip or a multi-day 100-mile (160 km) bicycle tour.
15. Evaluate the 75-mile trip (120 km) or 100-mile (160 km) tour. Answer such questions as:
- a. What were high/low points of the ride?
- b. What parts of your preparation helped you succeed? What could you have better prepared for?
- c. When did you almost quit? Why?
- d. How did your hydration and nutrition plan work during your ride? What was most helpful? What would you change about your plan next time?
- e. What would you do differently next time?