AY Honors/Trees/Answer Key

1. Describe the ways in which trees and shrubs differ.

Trees are generally taller than shrubs and have a main trunk from which all the secondary branches grow. Shrubs are generally shorter and may have multiple stems rather than a single trunk. Some plants can be considered either shrubs or trees depending on their growing conditions, so the division should not be considered exact.

2. Collect and identify typical leaves from 15 different species of trees. Spread neatly, press dry, mount, and label in a suitable notebook or on uniform-size sheets of paper.

Unless you are already very familiar with the trees in your area, you will need to get a field guide on trees for this activity. Illustrating all the tree species you may encounter is well beyond the scope of a single chapter in an answer book!

It is best to collect the leaves in the spring or early summer before insects and weather have had a chance to damage them, but if you prefer, you can try to collect them in the fall when the colors change.

When you go out collecting, take the field guide with you. It is important to identify the leaves as you collect them, as you can look at more than just the leaves for identification. The bark, environment, buds, and shape of the tree are all important clues to the tree's species. This is especially important if you wish to differentiate trees of the same genus (such as black cherry, pin cherry, choke cherry, etc). Indeed, proper identification may not be possible from just the leaf.

Collect leaves that are typical for the tree, but remember - smaller leaves are going to be easier to fit onto an 8.5x11 inch sheet of paper.

Press the leaves by placing them on some sort of absorbant paper - newspaper, paper towels, tissues, etc. Then place these under a stack of books or in a leaf press. After two weeks, the leaves should be flattened, dried, and well-preserved. Evergreens such as spruce and fir are difficult to preserve this way as the needles will fall off.

Once the leaves have been pressed, you can glue, tape, or laminate them onto notebook paper. Use looseleaf if you wish to rearrange them later. Yiou may also place the pressed leaves between two sheets of wax paper, cover with a towel, and iron.

3. Name two examples each of trees that have been named for:

a. What they are used for

• Sweet Gum: the gummy sap of this tree has been used as chewing gum.
• Cork Oak forms a thick, rugged and corky bark. Over time this bark can develop considerable thickness, and this is harvested every 10-12 years as cork.
• Balsam Fir: produces a resin which is known as Canadian Balsam. A balsam is the same thing as a balm, a soothing liquid - anything that soothes, heals, or restores.

b. The surroundings or environment in which they grow

• Mountain Ash grow in the mountainous areas of the northern US and Canada.
• Swamp Ash live in the swamps of the southern US.

c. Some distinctive feature

• Hornbeam: The common English name of "hornbeam" derives from the hardness of the wood (likened to horn) and the Old English beam, meaning a tree (like the German word "baum" which we know as "tannenbaum").
• Tulip Tree: is so named because its flowers resemble tulip flowers.

d. The geographic region in which they live

• Brazilwood: is not named after Brazil - Brazil is actually named for the tree!
• Cedar of Lebanon, is a coniferous tree native to the mountains of the Mediterranean region, in Lebanon, western Syria and south central Turkey
• Mexican Buckeye is a shrub or small tree native to northeastern Mexico and adjacent western Texas and southern New Mexico.

e. Persons who first found and described them:

• Douglas Fir: The common name honors David Douglas, the Scottish botanist who first introduced the tree into cultivation in 1826.

• Fraser Fir: named after John Fraser, a Scottish botanist. Fraser Firs are farmed and sold as Christmas trees.

4. Give the common name and tell the difference between the two great classes of trees.

The two great classes of trees are the gymnosperms and angiosperms. The gymnosperms do not produce flowers, but rather, produce naked seeds usually attached to the scale of a cone (such as a pine cone). The angiosperms do produce flowers which in turn become seed-bearing fruits (or nuts). More commonly, the gymnosperms are called evergreens, though this is not an accurate term because some angiosperms are evergreen (such as palms and the live oak). Gymnosperms and angiosperms are also commonly referred to as softwoods and hardwoods though those terms are not terribly accurate either, as several gymnosperms have hard wood and several angiosperms have soft wood.

6. Name several examples of the kinds of wood used in each of the following:

a. Flooring for houses

Oak, maple, pine.

b. Common plywood

Pine, fir, spruce

c. Furniture

Walnut, oak, cherry, maple, pine, mahogany

d. Ax handles

Hickory, ash

e. Fence posts

Locust, cedar, redwood, fir (treated)

f. Railroad ties

Hardwoods and softwoods.

g. Support beams for construction work

Oak, hickory, ash

h. Bows and arrows

Osage orange and elm for bows. Cedar, spruce, and fir for arrows

i. Ideal for use as kindling

Softwoods such as pine and cedar.

j. Burns slowly and leaves a bed of hot coals

Hardwoods, especially hickory and mesquite.

7. Name two examples each of trees which:

a. Grow best in wet lands

Bald Cypress, Sycamore, Willow, Swamp White Oak, Swamp Chestnut Oak, Overcup Oak, Tupelo Gum and Cottonwood.

b. Grow best at high levels in mountains

Larch, Bristlecone Pine (and may other pines), Birch, and Beech.