Especialidades JA/Amarre/Ocho

From Pathfinder Wiki
< AY Honors‎ | LashingAY Honors/Lashing/Shear/es /
Revision as of 16:42, 3 February 2017 by W126jep (talk | contribs) (Created page with "</noinclude> ===Amarre en ocho=== Image:Shear-lashing-2pole.JPG|thumb|right|400px|'''Dos palos''': Se comienza con un ballestrinque y se da vueltas a la cuerda alrededor de...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Amarre en ocho

Dos palos: Se comienza con un ballestrinque y se da vueltas a la cuerda alrededor de los dos postes como muestra la figura. Se «ahorca» el amarre y se asegura con otro ballestrinque. Igualmente es necesario apretar cada vuelta del amarre para darle mayor solidez. Un buen truco para que los mástiles queden mucho más sólidos es unirlos con dos amarres redondos pequeños, uno arriba y otro abajo.

Sheer lashing uses two or three spars or poles, 15 - 20 feet of rope.

To tie a sheer lashing, lay the two poles side-by-side and parallel to one another. Tie a clove hitch around one spar. Then wrap the free end of the rope around both spars about seven or eight times. Pull them as tight as you can. Then make three fraps around the lashing, and again, pull the rope as tight as you can. Finally, tie a clove hitch on the second spar.

Three Pole: Start with a clove hitch around one pole; Wrap around poles several times; Wrap between first and second pole several times; Wrap between second and third poles several times; Finish off with a clove hitch on the last pole; It can stand up like a tripod and hold a bowl, etc.

To use sheer lashing around with three poles, lay all three poles side by side and parallel to one another. Tie a clove hitch on one pole, and wrap the rope around all three seven or eight times. Pull the rope tight. Make three fraps between two of the poles, then cross over and make three more between the other two poles. Pull the frapping as tight as you can and finish it off with a clove hitch.