Difference between revisions of "AY Honors/Gold Prospecting - Advanced/Answer Key"

From Pathfinder Wiki
< AY Honors‎ | Gold Prospecting - AdvancedAY Honors/Gold Prospecting - Advanced/Answer Key
m (grammar)
Line 13: Line 13:
 
;g. Trommel: A trommel is composed of a slightly-inclined rotating metal tube (the 'scrubber section') with a screen at its discharge end. Lifter bars, sometimes in the form of bolted in angle iron, are attached to the interior of the scrubber section. The ore is fed into the elevated end of the trommel. Water, often under pressure, is provided to the scrubber and screen sections and the combination of water and mechanical action frees the valuable minerals from the ore. The mineral bearing ore that passes through the screen is then further concentrated in smaller devices such as sluices and jigs. The larger pieces of ore that do not pass through the screen can be carried to a waste stack by a conveyor.
 
;g. Trommel: A trommel is composed of a slightly-inclined rotating metal tube (the 'scrubber section') with a screen at its discharge end. Lifter bars, sometimes in the form of bolted in angle iron, are attached to the interior of the scrubber section. The ore is fed into the elevated end of the trommel. Water, often under pressure, is provided to the scrubber and screen sections and the combination of water and mechanical action frees the valuable minerals from the ore. The mineral bearing ore that passes through the screen is then further concentrated in smaller devices such as sluices and jigs. The larger pieces of ore that do not pass through the screen can be carried to a waste stack by a conveyor.
 
;h. Beach box
 
;h. Beach box
;i. Metal detector: An Electronic device designed to detect metals, Farous and non-Ferous they range in price from $100 to $3,000 dollars and normally will locate small nuggets up about 6" deep depending on the consentration of Iron manganote and the quality of the metal dector. They will locate your lost keys or watch, lost in the sand at the beach. (very useful) but from experence most of the gold you find is smaller than nuggets. and considering that most of the gold in the world is in gold ore (less than 10 ozt per ton) and requires heat or chemicals to etract. The metal dector is normally not a wise tool unless you have a lot of gold. the device was envented to locate old coins   
+
;i. Metal detector: A metal detector is an Electronic device designed to detect metals, Ferrous and non-Ferrous.  They range in price from $100 to $3,000 dollars and normally will locate small nuggets up to about 6" deep depending on the concentration of iron manganate and the quality of the metal detector. They will locate your lost keys or watch, lost in the sand at the beach (very useful), but from experience, most of the gold you find is smaller than nuggets. Considering that most of the gold in the world is in gold ore (less than 10 oz per ton) and requires heat or chemicals to extract, the metal detector is normally not a wise tool for prospecting unless you have a lot of gold. The device was invented to locate old coins.  
 
;j. Jig
 
;j. Jig
 
;k. Shaker table
 
;k. Shaker table

Revision as of 14:24, 13 January 2013

Template:Honor header

1. Have the Gold Prospecting Honor

Template:Ay prerequisite

2. Describe the following types of prospecting equipment.

a. Sluice box
A sluice box is a shallow box into which ore is shovelled. The box features several transverse barriers along the bottom called riffles to trap the heavier gold particles as water washes them and the other material along the box.
b. Rocker box
Similar in principle to a sluice is a rocker, a cradle-like piece of equipment that could be rocked to sift sands through screens, which was introduced by Chinese miners in British Columbia and Australia, where the practice was referred to as "rocking the golden baby".
c. High banker
d. Bucket dredge
e. Suction dredge
f. Dry washer
g. Trommel
A trommel is composed of a slightly-inclined rotating metal tube (the 'scrubber section') with a screen at its discharge end. Lifter bars, sometimes in the form of bolted in angle iron, are attached to the interior of the scrubber section. The ore is fed into the elevated end of the trommel. Water, often under pressure, is provided to the scrubber and screen sections and the combination of water and mechanical action frees the valuable minerals from the ore. The mineral bearing ore that passes through the screen is then further concentrated in smaller devices such as sluices and jigs. The larger pieces of ore that do not pass through the screen can be carried to a waste stack by a conveyor.
h. Beach box
i. Metal detector
A metal detector is an Electronic device designed to detect metals, Ferrous and non-Ferrous. They range in price from $100 to $3,000 dollars and normally will locate small nuggets up to about 6" deep depending on the concentration of iron manganate and the quality of the metal detector. They will locate your lost keys or watch, lost in the sand at the beach (very useful), but from experience, most of the gold you find is smaller than nuggets. Considering that most of the gold in the world is in gold ore (less than 10 oz per ton) and requires heat or chemicals to extract, the metal detector is normally not a wise tool for prospecting unless you have a lot of gold. The device was invented to locate old coins.
j. Jig
k. Shaker table

3. What government requirements, if any, are there to use the equipment listed in number 2 above?

a. Sluice box
b. Rocker box
c. High banker
d. Bucket dredge
e. Suction dredge
f. Dry washer
g. Trommel
h. Beach box
i. Metal detector
j. Jig
k. Shaker table

4. What are the advantages or disadvantages to the equipment listed in number 2 above?

a. Sluice box
b. Rocker box
c. High banker
d. Bucket dredge
e. Suction dredge
f. Dry washer
g. Trommel
h. Beach box
i. Metal detector
j. Jig
k. Shaker table

5. Use at least two of the types of equipment listed in number 2 above to prospect for gold.

6. Pathfinders are supposed to take only pictures and leave only footprints, but prospecting requires moving rocks and digging large holes. How can you reconcile these two conflicting requirements?

References