Difference between revisions of "AY Honors/Knot/Slipped half hitch"

From Pathfinder Wiki
 
(11 intermediate revisions by 3 users not shown)
Line 1: Line 1:
 +
<noinclude><translate><!--T:2-->
 +
</noinclude>
 
{{Knot
 
{{Knot
 
| name= Slipped half-hitch
 
| name= Slipped half-hitch
Line 5: Line 7:
 
| tying_instructions =
 
| tying_instructions =
 
Begin as for a clove hitch, but instead of passing the end of the line through the loop in the final step, pass a bight instead, leaving the end on the original side. Pulling on this end will release the hitch - if tied in a gasket, this will quickly release the sail.
 
Begin as for a clove hitch, but instead of passing the end of the line through the loop in the final step, pass a bight instead, leaving the end on the original side. Pulling on this end will release the hitch - if tied in a gasket, this will quickly release the sail.
| warnings = Never use this knot in a critical situation. It comes untied at the slightest provocation.
+
| warnings = Never use this knot in a critical situation. It comes untied at the slightest provocation.
 
}}
 
}}
 +
<noinclude></translate></noinclude>

Latest revision as of 03:42, 27 July 2022

Slipped half-hitch
SlipperyHitch.jpg

Use: A slipped half-hitch is a knot used to attach a line to a rod or bar. It does not provide great strength compared to some other knots, but it can be tied relatively quickly and released very easily. These characteristics mean that it is used on square-rigged ships for securing the gaskets that bind stowed sails to the yards.

How to tie:

Begin as for a clove hitch, but instead of passing the end of the line through the loop in the final step, pass a bight instead, leaving the end on the original side. Pulling on this end will release the hitch - if tied in a gasket, this will quickly release the sail.

WARNING: Never use this knot in a critical situation. It comes untied at the slightest provocation.