AY Honor Welding

From Pathfinder Wiki
< AY HonorsAY Honors/Welding
This page contains changes which are not marked for translation.
Other languages:
English • ‎español • ‎português do Brasil

Skill Level

3

Year

1978

Version

24.10.2021

Approval Authority

North American Division

Welding AY Honor NAD.png

Welding
Vocational
Skill Level
123
Approval Authority
North American Division
Year of Introduction

1978

See also

Technician Master Award

Overview

The Challenging Part

The most challenging requirement of this honor is probably this:

10. Demonstrate ability to weld flat, vertical, horizontal, and overhead on (1/8 inch x 1 inch x 8 inches) (0.3 cm x 2.5 cm x 20.3 cm) mild steel test plates.

11. Using the designated processes, perform the following:

a. PAC: Make one straight cut at least three inches long in mild steel or aluminum

b. SMAW: Complete i and ii, or complete iii.

i. Make two bead-on-plate welds at least two inches total length

ii. Make one square-groove weld in the flat position

iii. Make one corner weld in the flat position

c. GMAW: Complete i and ii, or complete iii.

i. Make two bead-on-plate welds at least two inches total length

ii. Make one square-groove weld in the flat position

iii. Make one lap weld in the flat position